summaryrefslogtreecommitdiffstats
path: root/cli
Commit message (Collapse)AuthorAgeFilesLines
* cli/xml: fix return handlingAtin Mukherjee2017-07-191-40/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | The return code of xmlTextWriter* APIs says it returns either the bytes written (may be 0 because of buffering) or -1 in case of error. Now if the volume of the xml data payload is not huge then most of the time the data to be written gets buffered, however when this grows sometimes this APIs will return the total number of bytes written and then it becomes absolutely mandatory that every such call is followed by XML_RET_CHECK_AND_GOTO otherwise we may end up returning a non zero ret code which would result into the overall xml generation to fail. >Reviewed-on: https://review.gluster.org/17702 >Smoke: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Amar Tumballi <amarts@redhat.com> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Gaurav Yadav <gyadav@redhat.com> Change-Id: I02ee7076e1d8c26cf654d3dc3e77b1eb17cbdab0 BUG: 1470488 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/17764 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Talur <rtalur@redhat.com>
* Tier/cli: detach status xml outputhari gowtham2017-05-301-28/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: detach status xml output was broken because of the wrong argument. The status_op sent to verify whether it is a tier status command was as false. Fix: the argument being passed was changed from false to true. >Change-Id: I8cdd4dd972d6bfbb61c1182cbf4097767f83c7c5 >BUG: 1446362 >Signed-off-by: hari gowtham <hgowtham@redhat.com> >Reviewed-on: https://review.gluster.org/17131 >Smoke: Gluster Build System <jenkins@build.gluster.org> >Tested-by: hari gowtham <hari.gowtham005@gmail.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Atin Mukherjee <amukherj@redhat.com> >Reviewed-by: N Balachandran <nbalacha@redhat.com> Change-Id: I8cdd4dd972d6bfbb61c1182cbf4097767f83c7c5 BUG: 1451587 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: https://review.gluster.org/17313 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* Fixes quota aux mount failureSanoj Unnikrishnan2017-05-132-4/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The aux mount is created on the first limit/remove_limit/list command and it remains until volume is stopped / deleted / (quota is disabled) , where we do a lazy unmount. If the process is uncleanly terminated, then the mount entry remains and we get (Transport disconnected) error on subsequent attempts to run quota list/limit-usage/remove commands. Second issue, There is also a risk of inadvertent rm -rf on the /var/run/gluster causing data loss for the user. Ideally, /var/run is a temp path for application use and should not cause any data loss to persistent storage. Solution: 1) unmount the aux mount after each use. 2) clean stale mount before mounting, if any. One caveat with doing mount/unmount on each command is that we cannot use same mount point for both list and limit commands. The reason for this is that list command needs mount to be accessible in cli after response from glusterd, So it could be unmounted by a limit command if executed in parallel (had we used same mount point) Hence we use separate mount points for list and limit commands. > Reviewed-on: https://review.gluster.org/16938 > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Smoke: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Manikandan Selvaganesh <manikandancs333@gmail.com> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> > Reviewed-by: Atin Mukherjee <amukherj@redhat.com> > (cherry picked from commit 2ae4b4058691b324535d802f4e6d24cce89a10e5) Change-Id: I4f9e39da2ac2b65941399bffb6440db8a6ba59d0 BUG: 1449779 Signed-off-by: Sanoj Unnikrishnan <sunnikri@redhat.com> Reviewed-on: https://review.gluster.org/17241 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Talur <rtalur@redhat.com>
* glusterd: Make reset-brick work correctly if brick-mux is onSamikshan Bairagya2017-05-123-4/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Reset brick currently kills of the corresponding brick process. However, with brick multiplexing enabled, stopping the brick process would render all bricks attached to it unavailable. To handle this correctly, we need to make sure that the brick process is terminated only if brick-multiplexing is disabled. Otherwise, we should send the GLUSTERD_BRICK_TERMINATE rpc to the respective brick process to detach the brick that is to be reset. > Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> > Reviewed-on: https://review.gluster.org/17128 > Smoke: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Atin Mukherjee <amukherj@redhat.com> (cherry picked from commit 74383e3ec6f8244b3de9bf14016452498c1ddcf0) Change-Id: I69002d66ffe6ec36ef48af09b66c522c6d35ac58 BUG: 1449934 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: https://review.gluster.org/17253 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd/ganesha : throw proper error for "gluster nfs-ganesha disable"jiffin tony thottan2017-04-241-11/+19
| | | | | | | | | | | | | | | | | | | For first time or if "gluster nfs-ganesha enable" fails the global option "nfs-ganesha" won't be stored in glusterd's dictionary. In both cases the "gluster nfs-ganesha disable" throws following error : "nfs-ganesha: failed: nfs-ganesha is already (null)d." Also this patch provides the missing prompt for nfs-ganesha disable in 3.10 Change-Id: I7c9fd6dabedc0cfb14c5190b3554bc63a6bc0340 BUG: 1427759 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: https://review.gluster.org/16791 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* build: miscellaneous spelling fixesPatrick Matthäi2017-04-021-1/+1
| | | | | | | | | | | | | | | | | | Debian builds detected spelling issues with GlusterFS 3.10.1. Instead of carrying the patch in the Debian sources, let's include the fixes here too. Change-Id: I38db6adf142f7ec247bffd47aa1e6ff1a0c49e00 Reviewed-on-master: https://review.gluster.org/16973 Reported-by: Patrick Matthäi <pmatthaei@debian.org> BUG: 1437854 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/16974 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Zhou Zhengping <johnzzpcrystal@gmail.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* build/packaging: Debian and Ubuntu don't have /usr/libexecKaleb S. KEITHLEY2017-03-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | GLUSTERFS_LIBEXECDIR is effectively hard-coded to /usr/libexec/glusterfs in configure(.ac) Debian-based distributions don't have a /usr/libexec/ directory This issues is partially mitigated by the use of $libexecdir in some of the Makefile.am files, but even so the incorrectly defined GLUSTERFS_LIBEXECDIR results in various things such as gsyncd, glusterfind, eventsd, etc., trying to invoke other scripts and programs from a location that doesn't exist. And once we correctly define GLUSTERFS_LIBEXECDIR, then we might as well use it appropriatedly. master change https://review.gluster.org/16880 master BZ: 1430841 Change-Id: If5219cadc51ae316f7ba2e2831d739235c77902d BUG: 1430844 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16881 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Milind Changire <mchangir@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* glusterd: add a cli command to trigger a statedump on a clientPoornima G2017-02-132-12/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this, we will be able to trigger statedumps on remote Gluster clients, mainly targetted for applications using libgfapi. Design: SIGUSR signal is the most comman way of taking a statedump in Gluster. But it cannot be used for libgfapi based processes, as the process loading the library might have already consumed SIGUSR signal. Hence going by the command way. One has to issue a Gluster command to initiate a statedump on the libgfapi based client. The command takes hostname and PID as an argument. All the glusterds in the cluster, check if they are connected to the specified hostname, and send an RPC request to all the connected clients from that hostname (via the mgmt connection). > URL: http://review.gluster.org/16357 > BUG: 1169302 > Signed-off-by: Poornima G <pgurusid@redhat.com> > [ndevos: minor fixes and split patch in smaller pieces] > Reviewed-on-master: https://review.gluster.org/9228 > Reviewed-by: Niels de Vos <ndevos@redhat.com> > Tested-by: Niels de Vos <ndevos@redhat.com> > Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> > Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> BUG: 1418981 Change-Id: Icbe4d2f026b32a2c7d5535e1bfb2cdaaff042e91 Signed-off-by: Shyam <srangana@redhat.com> Reviewed-on: https://review.gluster.org/16601 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cli: add integer check for timeout optionAtin Mukherjee2017-02-101-1/+28
| | | | | | | | | | | | | | | | | | | | >Reviewed-on: https://review.gluster.org/16578 >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Smoke: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Prashanth Pai <ppai@redhat.com> >Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> >(cherry picked from commit 421a098d2acfd4b837d4c03ea6f69987c670d3f7) Change-Id: Ia9f2d343e0a9ad13af1a62abe8946d646d36b3bb BUG: 1421017 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/16595 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* CLI/TIER: removing old tier commands under rebalancehari gowtham2017-02-073-17/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | back-port of : https://review.gluster.org/#/c/16463/ PROBLEM: gluster v rebalance <volname> tier start works even after the switch of tier to service framework. This lets the user have two tierd for the same volume. FIX: checking for each process will make the new code hard to maintain. So we are removing the support for old commands. >Change-Id: I5b0974b2dbb74f0bee8344b61c7f924300ad73f2 >BUG: 1415590 >Signed-off-by: hari gowtham <hgowtham@redhat.com> >Reviewed-on: https://review.gluster.org/16463 >Smoke: Gluster Build System <jenkins@build.gluster.org> >Tested-by: hari gowtham <hari.gowtham005@gmail.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: N Balachandran <nbalacha@redhat.com> >Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Change-Id: Ib996d89b1bd250176a3f5eeb369b71b0a4f95968 BUG: 1419868 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: https://review.gluster.org/16555 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cli: keep 'gluster volume status detail' consistentKaleb S. KEITHLEY2017-01-263-14/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The output of the command 'gluster volume status <volname> detail' is not consistent between operating systems. On linux hosts it shows the file system type, the device name, mount options and inode size of each brick. However the same command executed on a FreeBSD host doesn't show all this information, even for bricks stored on a linux. Additionally, for hosts other than linux, this information is shown as 'N/A' many times. This has been fixed to show as much information as it can be retrieved from the operating system. The file contrib/mount/mntent.c has been mostly rewriten because it contained many errors that caused mount information to not be retrieved on some operating systems. Master BZ 1411334 Master review https://review.gluster.org/#/c/16371/ Change-Id: Icb6e19e8af6ec82255e7792ad71914ef679fc316 BUG: 1416416 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: https://review.gluster.org/16469 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* dht/rebalance Estimate time to complete rebalanceN Balachandran2017-01-241-4/+24
| | | | | | | | | | | | | | | | | | | | | | | | | The estimates will be logged to the rebalance log on running gluster v rebalance <vol> status > Change-Id: I9d51b139cd4c8dfde1ff2c2050720ae606c13fc6 > BUG: 1396004 > Signed-off-by: N Balachandran <nbalacha@redhat.com> > Reviewed-on: http://review.gluster.org/15893 > Smoke: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> (cherry picked from commit 2edd75ec8de17da89004859375844f60890a4df0) Signed-off-by: N Balachandran <nbalacha@redhat.com> Change-Id: I58b0550210149443966798d9a26e73cb598eeb6a BUG: 1415915 Reviewed-on: https://review.gluster.org/16458 Tested-by: N Balachandran <nbalacha@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* tier : Tier as a servicehari gowtham2017-01-163-114/+161
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tierd is implemented by separating from rebalance process. The commands affected: 1) Attach tier will trigger this process instead of old one 2) tier start and tier start force will also trigger this process. 3) volume status [tier] will show tier daemon as a process instead of task and normal tier status and tier detach status works. 4) tier stop implemented. 5) detach tier implemented separately along with new detach tier status 6) volume tier volname status will work using the changes. 7) volume set works This patch has separated the tier translator from the legacy DHT rebalance code. It now sends the RPCs from the CLI to glusterd separate to the DHT rebalance code. The daemon is now a service, similar to the snapshot daemon, and can be viewed using the volume status command. The code for the validation and commit phase are the same as the earlier tier validation code in DHT rebalance. The “brickop” phase has been changed so that the status command can use this framework. The service management framework is now used. DHT rebalance does not use this framework. This service framework takes care of : *) spawning the daemon, killing it and other such processes. *) volume set options , which are written on the volfile. *) restart and reconfigure functions. Restart is to restart the daemon at two points 1)after gluster goes down and comes up. 2) to stop detach tier. *) reconfigure is used to make immediate volfile changes. By doing this, we don’t restart the daemon. it has the code to rewrite the volfile for topological changes too (which comes into place during add and remove brick). With this patch the log, pid, and volfile are separated and put into respective directories. Change-Id: I3681d0d66894714b55aa02ca2a30ac000362a399 BUG: 1313838 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/13365 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cli/geo-rep: Fix geo-rep status detailSonaArora2017-01-121-22/+18
| | | | | | | | | | | | | | | | | Earlier this command works when master and slave volume args are given. Now it works even when no volume args are given (i.e. 'gluster volume geo-replication status detail) and also when master volume is given (i.e.'gluster volume geo-replication <master-vol> status detail'). BUG: 1410071 Signed-off-by: SonaArora <sarora@redhat.com> Change-Id: I1a39241a4a5d70c20b2326599b3cccd8f1f6dc78 Reviewed-on: http://review.gluster.org/16347 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: Kotresh HR <khiremat@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com>
* glusterd: Add info on op-version for clients in vol status outputSamikshan Bairagya2017-01-122-6/+25
| | | | | | | | | | | | | | | | | | | | | Currently the `gluster volume status <VOLNAME|all> clients` command gives us the following information on clients: 1. Brick name 2. Client count for each brick 3. hostname:port for each client 4. Bytes read and written for each client There is no information regarding op-version for each client. This patch adds that to the output. Change-Id: Ib2ece93ab00c234162bb92b7c67a7d86f3350a8d BUG: 1409078 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/16303 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd, cli: Get global options through volume get functionalitySamikshan Bairagya2016-12-301-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently it is not possible to retrieve values of global options by using the 'gluster volume get' functionality if there are no volumes present. In order to get the global options one has to use 'gluster volume get' with a specific volume name. This usage makes the illusion as though the option is set only on one volume, which is incorrect. When setting the global options, 'gluster volume set' provides a way to set them using the volume name as 'all'. Similarly, retrieving the global options should be made possible by using the volume name 'all' with the 'gluster volume get' functionality. This patch adds that functionality to 'volume get' Usage: # gluster volume get all <OPTION/all> Change-Id: Ic2fdb9eda69d4806d432dae26d117d9660fe6d4e BUG: 1378842 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/15563 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cli: Suppress unused but set warningsVijay Bellur2016-12-142-6/+2
| | | | | | | | | | | | | | | | | | GCC has the following complaint during compilation: ../../../cli/src/cli-rpc-ops.c: In function ‘gf_cli_get_volume_cbk’: ../../../cli/src/cli-rpc-ops.c:846:36: warning: variable ‘caps’ set but not used [-Wunused-but-set-variable] char *caps = NULL; Change-Id: Ia378a6c83ba70ae35290802b7b38ad2830c0956c BUG: 1402261 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/15982 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cluster/afr: CLI for granular entry heal enablement/disablementKrutika Dhananjay2016-11-283-12/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When there are already existing non-granular indices created that are yet to be healed, if granular-entry-heal option is toggled from 'off' to 'on', AFR self-heal whenever it kicks in, will try to look for granular indices in 'entry-changes'. Because of the absence of name indices, granular entry healing logic will fail to heal these directories, and worse yet unset pending extended attributes with the assumption that are no entries that need heal. To get around this, a new CLI is introduced which will invoke glfsheal program to figure whether at the time an attempt is made to enable granular entry heal, there are pending heals on the volume OR there are one or more bricks that are down. If either of them is true, the command will be failed with the appropriate error. New CLI: gluster volume heal <VOL> granular-entry-heal {enable,disable} Change-Id: I1f4fe8162813b9068e198965d94169fee4adc099 BUG: 1370410 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15747 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cli: glusterfs_ctx_defaults_init should not re-initialize ctx->locksRajesh Joseph2016-11-241-2/+0
| | | | | | | | | | | | | | glusterfs_ctx_new already initialize ctx->locks therefore the second initialization in glusterfs_ctx_defaults_init does not make sense. Change-Id: I8a44bed13af20e60e8bafb05360e88c0b237056c BUG: 1397419 Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-on: http://review.gluster.org/15904 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* events: Add FMT_WARN for gf_eventPranith Kumar K2016-11-181-2/+2
| | | | | | | | | | | | | | | | | Raghavendra G found that posix is trying to print %s but passing an int when HEALTH_CHECK fails in posix. These are the kind of bugs that should be caught at compilation itself. Also fixed the problematic gf_event() callers. BUG: 1386097 Change-Id: Id7bd6d9a9690237cec3ca1aefa2aac085e8a1270 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15671 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cli/rebalance: remove brick status is incorrectN Balachandran2016-11-171-5/+16
| | | | | | | | | | | | | | | | | | | | | | If a remove brick operation is preceded by a fix-layout, running remove-brick status on a node which does not contain any of the bricks that were removed displays fix-layout status. The defrag_cmd variable was not updated in glusterd for the nodes not hosting removed bricks causing the status parsing to go wrong. This is now updated. Also made minor modifications to the spacing in the fix-layout status output. Change-Id: Ib735ce26be7434cd71b76e4c33d9b0648d0530db BUG: 1389697 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/15749 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* geo-rep/cli: Validate Checkpoint labelAravinda VK2016-11-161-0/+25
| | | | | | | | | | | | | | | | | | Checkpoint command accepts "now" or any other Time in "%Y-%m-%d %H:%M:%S" format as label. Validation added with this patch for the input label. Checkpoint set will fail for invalid label. BUG: 1388401 Change-Id: I23518c151ab4b294f64cae3b78baaacb3d8f7b82 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/15721 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-by: Kotresh HR <khiremat@redhat.com>
* nfs/cli : add warning message while enabling gluster nfsJiffin Tony Thottan2016-11-151-0/+14
| | | | | | | | | | | | | Change-Id: Ice70003f7295d2d8af9877e1ecf6f3c81422b30c BUG: 1376693 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/15805 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* Update copyright content for glusterfs binariesAnoop C S2016-11-101-12/+11
| | | | | | | | | | | | Change-Id: I2d5de7ae634d55ae32977e337f366586eab449e4 BUG: 1198849 Signed-off-by: Anoop C S <anoopcs@redhat.com> Reviewed-on: http://review.gluster.org/15819 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* CLI/TIER: throw warning regarding the removal of the older commands.hari2016-10-251-0/+28
| | | | | | | | | | | | | | | | The older tier commands for attach tier and detach tier have to be removed from code. This patch sends a warning asking to use new command as older ones are depricated and will be removed. Change-Id: Ie1c62947bad6ff106f40331ff6134838a6c72a7a BUG: 1388062 Signed-off-by: hari <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/15713 Tested-by: hari gowtham <hari.gowtham005@gmail.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* eventsapi: Fix sending event during volume set helpAravinda VK2016-10-241-1/+1
| | | | | | | | | | | | | | | | Event sent when `gluster volume set help` command is run with Volume name as "help" and empty options list With this patch, event sent only when volume set on a real volume BUG: 1387207 Change-Id: Ia8785d6108cb86f7d89ecf9ea552df0334b41398 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/15685 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* bitrot/cli: Add ondemand scrub eventKotresh HR2016-10-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | | Following Bitrot Events are added BITROT_SCRUB_ONDEMAND { "nodeid": NODEID, "ts": TIMESTAMP, "event": EVENT_TYPE, "message": { "name": VOLUME_NAME, } } Change-Id: I85e668e254e6f29c447ddb4ad2ce2fc04f98bf3c BUG: 1387864 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/15700 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* events: add TIER_START and TIER_START_FORCE eventsMilind Changire2016-10-201-11/+28
| | | | | | | | | | | | | | Add TIER_START and TIER_START_FORCE events Conditionally generate DETACH events as per user confirmation. Change-Id: I205dc14884d707087edce42e8cf4208bd89d31dc BUG: 1386247 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: http://review.gluster.org/15675 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* build: out-of-tree builds generates files in the wrong directoryKaleb S KEITHLEY2016-09-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And minor cleanup of a few of the Makefile.am files while we're at it. Rewrite the make rules to do what xdrgen does. Now we can get rid of xdrgen. Note 1. netbsd6's sed doesn't do -i. Why are we still running smoke tests on netbsd6 and not netbsd7? We barely support netbsd7 as it is. Note 2. Why is/was libgfxdr.so (.../rpc/xdr/src/...) linked with libglusterfs? A cut-and-paste mistake? It has no references to symbols in libglusterfs. Note3. "/#ifndef\|#define\|#endif/" (note the '\'s) is a _basic_ regex that matches the same lines as the _extended_ regex "/#(ifndef|define|endif)/". To match the extended regex sed needs to be run with -r on Linux; with -E on *BSD. However NetBSD's and FreeBSD's sed helpfully also provide -r for compatibility. Using a basic regex avoids having to use a kludge in order to run sed with the correct option on OS X. Note 4. Not copying the bit of xdrgen that inserts copyright/license boilerplate. AFAIK it's silly to pretend that machine generated files like these can be copyrighted or need license boilerplate. The XDR source files have their own copyright and license; and their copyrights are bound to be more up to date than old boilerplate inserted by a script. From what I've seen of other Open Source projects -- e.g. gcc and its C parser files generated by yacc and lex -- IIRC they don't bother to add copyright/license boilerplate to their generated files. It appears that it's a long-standing feature of make (SysV, BSD, gnu) for out-of-tree builds to helpfully pretend that the source files it can find in the VPATH "exist" as if they are in the $cwd. rpcgen doesn't work well in this situation and generates files with "bad" #include directives. E.g. if you `rpcgen ../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.x`, you get an #include directive in the generated .c file like this: ... #include "../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.h" ... which (obviously) results in compile errors on out-of-tree build because the (generated) header file doesn't exist at that location. Compared to `rpcgen ./glusterfs3-xdr.x` where you get: ... #include "glusterfs3-xdr.h" ... Which is what we need. We have to resort to some Stupid Make Tricks like the addition of various .PHONY targets to work around the VPATH "help". Warning: When doing an in-tree build, -I$(top_builddir)/rpc/xdr/... looks exactly like -I$(top_srcdir)/rpc/xdr/... Don't be fooled though. And don't delete the -I$(top_builddir)/rpc/xdr/... bits Change-Id: Iba6ab96b2d0a17c5a7e9f92233993b318858b62e BUG: 1330604 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14085 Tested-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* cli: fix unused variable warnings/errorsNiels de Vos2016-09-182-3/+0
| | | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a "pragma leak" where the generated rpc/xdr headers have a pair of pragmas that disable these warnings. With the warnings disabled, many unused variables have crept into the code base. And 14085 won't pass its own smoke test until all these warnings are fixed. Change-Id: Ib78fed1fab00ba22a90f2148a343170488fa05cf BUG: 1369124 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/15523 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cli/cli-rpc-ops: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-171-4/+0
| | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a "pragma leak" where the generated rpc/xdr headers have a pair of pragmas that disable these warnings. With the warnings disabled, many unused variables have crept into the code base. And 14085 won't pass its own smoke test until all these warnings are fixed. BUG: 1369124 Change-Id: I844e694c1797f9f6512f75fbe3620f527d1f5203 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15522 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* events/dht: dht cli eventsN Balachandran2016-09-151-2/+168
| | | | | | | | | | | | | | Adding events for add/remove brick and rebalance from the cli. Change-Id: I4e07cb7224e1b63a2926db055f87a02220c5d043 BUG: 1371874 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/15500 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cluster/tier: add tiering eventsMilind Changire2016-09-081-2/+21
| | | | | | | | | | | | | | | | | | | | | | Add events for: * tier attach and detach * tier pause and resume * tier rising and dropping hi and lo watermarks Update eventskeygen.py with tiering events. Update cli help with: * attach: add optional force argument * detach: make force available as non-optional argument on its own Change-Id: I43990d3a8742151a4a7889bafa19cb572fe661bd BUG: 1368336 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: http://review.gluster.org/15232 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* cli: fix volume status xml generationAtin Mukherjee2016-09-081-4/+6
| | | | | | | | | | | | | | | While generating xml, if CLI fails in between xml output doesn't get dumped into stdout. Fix is to invoke cli_xml_output_vol_status_end () in such failures. Change-Id: I7cb3097f5ae23092e6d20f68bd75aa190c31ed88 BUG: 1372553 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/15384 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-by: Prashanth Pai <ppai@redhat.com>
* eventsapi: Fix Volume Stop and delete prompt issueAravinda VK2016-09-061-4/+6
| | | | | | | | | | | | | | | | During Volume Stop and Delete, event is emitted even if prompt answer is No. Also added "force" details in START and STOP events. BUG: 1373072 Change-Id: I986dcff7154b584f6ed44b533d4eeabe82815235 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/15399 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* snapshot/eventsapi: Integrate snapshot events with eventsapiAvra Sengupta2016-09-011-29/+355
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. EVENT_SNAPSHOT_CREATED : snapshot_name=snap1 volume_name=test_vol snapshot_uuid=26dd6c52-6021-40b1-a507-001a80401d70 2. EVENT_SNAPSHOT_CREATE_FAILED : snapshot_name=snap1 volume_name=test_vol error=Snapshot snap1 already exists 3. EVENT_SNAPSHOT_ACTIVATED : snapshot_name=snap1 snapshot_uuid=26dd6c52-6021-40b1-a507-001a80401d70 4. EVENT_SNAPSHOT_ACTIVATE_FAILED: snapshot_name=snap1 error=Snapshot snap1 is already activated. 5. EVENT_SNAPSHOT_DEACTIVATED : snapshot_name=snap1 snapshot_uuid=26dd6c52-6021-40b1-a507-001a80401d70 6. EVENT_SNAPSHOT_DEACTIVATE_FAILED : snapshot_name=snap3 error=Snapshot (snap3) does not exist. 7. EVENT_SNAPSHOT_SOFT_LIMIT_REACHED : volume_name=test_vol volume_id=2ace2616-5591-4b9b-be2a-38592dda5758 8. EVENT_SNAPSHOT_HARD_LIMIT_REACHED : volume_name=test_vol volume_id=2ace2616-5591-4b9b-be2a-38592dda5758 9. EVENT_SNAPSHOT_RESTORED : snapshot_name=snap1 volume_name=test_vol snapshot_uuid=3a840ec5-08da-4f2b-850d-1d5539a5d14d 10. EVENT_SNAPSHOT_RESTORE_FAILED : snapshot_name=snap10 error=Snapshot (snap10) does not exist 11. EVENT_SNAPSHOT_DELETED : snapshot_name=snap1 snapshot_uuid=d9ff3d4f-f579-4345-a4da-4f9353f0950c 12. EVENT_SNAPSHOT_DELETE_FAILED : snapshot_name=snap2 error=Snapshot (snap2) does not exist 13. EVENT_SNAPSHOT_CLONED : clone_uuid=93ba9f06-cb9c-4ace-aa52-2616e7f31022 snapshot_name=snap1 clone_name=clone2 14. EVENT_SNAPSHOT_CLONE_FAILED : snapshot_name=snap1 clone_name=clone2 error=Volume with name:clone2 already exists 15. EVENT_SNAPSHOT_CONFIG_UPDATED : auto-delete=enable config_type=system_config config_type=volume_config hard_limit=100 16. EVENT_SNAPSHOT_CONFIG_UPDATE_FAILED : error=Invalid snap-max-soft-limit 110. Expected range 1 - 100 17. EVENT_SNAPSHOT_SCHEDULER_INITIALISED : status=Success 18. EVENT_SNAPSHOT_SCHEDULER_INIT_FAILED 19. EVENT_SNAPSHOT_SCHEDULER_ENABLED : status=Successfuly Enabled 20. EVENT_SNAPSHOT_SCHEDULER_ENABLE_FAILED : error=Snapshot scheduler is already enabled. 21. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_ADDED : status=Successfuly added job job1 22. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_ADD_FAILED : status=Failed to add job job1 error=The job already exists. 23. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_EDITED : status=Successfuly edited job job1 24. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_EDIT_FAILED : status=Failed to edit job job2 error=The job cannot be found. 25. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_DELETED : status=Successfuly deleted job job1 26. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_DELETE_FAILED : status=Failed to delete job job1 error=The job cannot be found. 27. EVENT_SNAPSHOT_SCHEDULER_DISABLED : status=Successfuly Disabled 28. EVENT_SNAPSHOT_SCHEDULER_DISABLE_FAILED : error=Snapshot scheduler is already disabled. Change-Id: I3479cc3fb7af3c76ded67cf289f99547d0a55d21 BUG: 1370567 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/15329 Tested-by: Aravinda VK <avishwan@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* io-stats: Add stats for upcall notificationsv3.10devPoornima G2016-08-312-1/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this patch, there will be additional entries seen in the profile info: UPCALL : Total number of upcall events that were sent from the brick(in brick profile), and number of upcall notifications recieved by client(in client profile) Cache invalidation events: ------------------------- CI_IATT : Number of upcalls that were cache invalidation and had one of the IATT_UPDATE_FLAGS set. This indicates that one of the iatt value was changed. CI_XATTR : Number of upcalls that were cache invalidation, and had one of the UP_XATTR or UP_XATTR_RM set. This indicates that an xattr was updated or deleted. CI_RENAME : Number of upcalls that were cache invalidation, resulted by the renaming of a file or directory CI_UNLINK : Number of upcalls that were cache invalidation, resulted by the unlink of a file. CI_FORGET : Number of upcalls that were cache invalidation, resulted by the forget of inode on the server side. Lease events: ------------ LEASE_RECALL : Number of lease recalls sent by the brick (in brick profile), and number of lease recalls recieved by client(in client profile) Note that the sum of CI_IATT, CI_XATTR, CI_RENAME, CI_UNLINK, CI_FORGET, LEASE_RECALL may not be equal to UPCALL. This is because, each cache invalidation can carry multiple flags. Eg: - Every CI_XATTR will have CI_IATT - Every CI_UNLINK will also increment CI_IATT as link count is an iatt attribute. Also UP_PARENT_DENTRY_FLAGS is currently not accounted for, as CI_RENAME and CI_UNLINK will always have the flag UP_PARENT_DENTRY_FLAGS Change-Id: Ieb8cd21dde2c4c7618f12d025a5e5156f9cc0fe9 BUG: 1371543 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/15193 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* event: fix gf_event messages for replace/reset brick opAnuradha Talur2016-08-311-10/+18
| | | | | | | | | | | | Change-Id: I80ebeeaffd2b228d7d0796c8d08bc2a051c4ccac BUG: 1266876 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/15370 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cli: Fix double unref of dictRavishankar N2016-08-311-3/+0
| | | | | | | | | | | | | | | | | | | Problem: `gluster system:: uuid get` hangs due to double unref of dict. Fix: Remove the unnecessary unref in cli_cmd_uuid_get_cbk(). In the said function, if calling proc->fn() is sucessful, the dict is automatically unrefed in its cbk as a part of cli_local_wipe(). If calling proc->fn() fails, then CLI_STACK_DESTROY() takes care of the unref. Change-Id: Ib656d200f14a27415b36794a0bdadfe36b0d5306 BUG: 1371775 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/15368 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd : Introduce reset brickAnuradha Talur2016-08-295-42/+415
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The command basically allows replace brick with src and dst bricks as same. Usage: gluster v reset-brick <volname> <hostname:brick-path> start This command kills the brick to be reset. Once this command is run, admin can do other manual operations that they need to do, like configuring some options for the brick. Once this is done, resetting the brick can be continued with the following options. gluster v reset-brick <vname> <hostname:brick> <hostname:brick> commit {force} Does the job of resetting the brick. 'force' option should be used when the brick already contains volinfo id. Problem: On doing a disk-replacement of a brick in a replicate volume the following 2 scenarios may occur : a) there is a chance that reads are served from this replaced-disk brick, which leads to empty reads. b) potential data loss if next writes succeed only on replaced brick, and heal is done to other bricks from this one. Solution: After disk-replacement, make sure that reset-brick command is run for that brick so that pending markers are set for the brick and it is not chosen as source for reads and heal. But, as of now replace-brick for the same brick-path is not allowed. In order to fix the above mentioned problem, same brick-path replace-brick is needed. With this patch reset-brick commit {force} will be allowed even when source and destination <hostname:brickpath> are identical as long as 1) destination brick is not alive 2) source and destination brick have the same brick uuid and path. Also, the destination brick after replace-brick will use the same port as the source brick. Change-Id: I440b9e892ffb781ea4b8563688c3f85c7a7c89de BUG: 1266876 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/12250 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ashish Pandey <aspandey@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cli,rpc : Removing logically dead codeMuthu-vigneshwaran2016-08-291-4/+0
| | | | | | | | | | | | | | | CID = 1357865, 1357866 Change-Id: I05eb345e9357d889872d259a600759392b188bb3 BUG: 789278 Signed-off-by: Muthu-vigneshwaran <mvignesh@redhat.com> Reviewed-on: http://review.gluster.org/15148 Tested-by: Muthu Vigneshwaran Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Manikandan Selvaganesh <mselvaga@redhat.com>
* cli: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-274-68/+9
| | | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: Ifc33762cf62259961ceb35ae9ac3cbec7094b703 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15238 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/cli: cli to get local state representation from glusterdSamikshan Bairagya2016-08-265-47/+290
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently there is no existing CLI that can be used to get the local state representation of the cluster as maintained in glusterd in a readable as well as parseable format. The CLI added has the following usage: # gluster get-state [daemon] [odir <path/to/output/dir>] [file <filename>] This would dump data points that reflect the local state representation of the cluster as maintained in glusterd (no other daemons are supported as of now) to a file inside the specified output directory. The default output directory and filename is /var/run/gluster and glusterd_state_<timestamp> respectively. The option for specifying the daemon name leaves room to add support for other daemons in the future. Following are the data points captured as of now to represent the state from the local glusterd pov: * Peer: - Primary hostname - uuid - state - connection status - List of hostnames * Volumes: - name, id, transport type, status - counts: bricks, snap, subvol, stripe, arbiter, disperse, redundancy - snapd status - quorum status - tiering related information - rebalance status - replace bricks status - snapshots * Bricks: - Path, hostname (for all bricks these info will be shown) - port, rdma port, status, mount options, filesystem type and signed in status for bricks running locally. * Services: - name, online status for initialised services * Others: - Base port, last allocated port - op-version - MYUUID Change-Id: I4a45cc5407ab92d8afdbbd2098ece851f7e3d618 BUG: 1353156 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/14873 Reviewed-by: Avra Sengupta <asengupt@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* feature/bitrot: Ondemand scrub option for bitrotKotresh HR2016-08-252-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The bitrot scrubber takes 'hourly/daily/biweekly/monthly' as the values for 'scrub-frequency'. There is no way to schedule the scrubbing when the admin wants it. Ondemand scrubbing brings in the new option 'ondemand' with which the admin can start scrubbing ondemand. It starts the scrubbing immediately. Ondemand scrubbing is successful only if the scrubber is in 'Active (Idle)' (waiting for it's next frequency cycle to start scrubbing). It is not entertained when the scrubber is in 'Paused' or already running. Here is the command line syntax. gluster volume bitrot <vol name> scrub ondemand Change-Id: I84c28904367eed827a7dae8d6a535c14b28e9f4d BUG: 1366195 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/15111 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* quota/cli: add user driven quota eventsManikandan Selvaganesh2016-08-241-0/+47
| | | | | | | | | | | | | | This patch targets to capture all the user driven quota related events which are important to be notified. Change-Id: I90c0af434363465e9dbdf6fca65ac220251d8d3c BUG: 1368931 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-on: http://review.gluster.org/15230 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* eventsapi: Fix disable-events issueAravinda VK2016-08-242-0/+2
| | | | | | | | | | | | | | | | | | | | | | | Events related sources are not loaded in libglusterfs when configure is run with --disable-events option. Due to this every call of gf_event should be guarded with USE_EVENTS macro. To prevent this, USE_EVENTS macro was included in events.c itself(Patch #15054) Instead of disabling building entire directory "events", selectively disabled the code. So that constants and empty function gf_event is exposed. Code will not fail even if gf_event is called when events is disabled. BUG: 1368042 Change-Id: Ia6abfe9c1e46a7640c4d8ff5ccf0e9c30c87f928 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/15198 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* snapshot/cli: Fix snapshot status xml outputAvra Sengupta2016-08-232-36/+51
| | | | | | | | | | | | | | | | | | | | | | | | snap status --xml errors out if a brick is down and doesn't have pid. It is handled in the cli of the snap status where "N/A" is displayed in such a scenario. Handled the same in xml snap status <snapname> --xml fails as the writer is not initialised for the same. Using GF_SNAP_STATUS_TYPE_ITER instead of GF_SNAP_STATUS_TYPE_SNAP for all snap's status to differentiate between the two scenarios. Added testcase volume-snapshot-xml.t to check all snapshot commands xml outputs Change-Id: I99563e8f3e84f1aaeabd865326bb825c44f5c745 BUG: 1325831 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/14018 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* snapshot: Display number of snapshots in volume infoAvra Sengupta2016-08-232-0/+19
| | | | | | | | | | | | | | | Display number of snapshots in a volume in volume info output. This number gets modified, with create, delete, and restore operations. Change-Id: Ic9b7c2b6950980f8ce75ca362998c097ea7c863d BUG: 1360693 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/15029 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* eventsapi: Bitrot eventsKotresh HR2016-08-191-0/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following Bitrot Events are added BITROT_ENABLE/BITROT_DISABLE { "nodeid": NODEID, "ts": TIMESTAMP, "event": EVENT_TYPE, "message": { "name": VOLUME_NAME, } } BITROT_SCRUB_THROTTLE/BITROT_SCRUB_FREQ/BITROT_SCRUB { "nodeid": NODEID, "ts": TIMESTAMP, "event": EVENT_TYPE, "message": { "name": VOLUME_NAME, "value": OPTION_VALUE } } EVENT_BITROT_BAD_FILE { "nodeid": NODEID, "ts": TIMESTAMP, "event": EVENT_TYPE, "message": { "gfid": GFID_OF_FILE, "brick": BRICK_ROOT, "path": FILE_PATH_FROM_BRICK_ROOT (if available) } } Change-Id: I8c37b0e9db9f4f0f3d05d8f78b5521c7db0e2237 BUG: 1367815 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/15190 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com>
* eventsapi: Geo-replication User driven eventsAravinda VK2016-08-041-0/+125
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following Geo-replication Events are added GEOREP_CREATE/GEOREP_START/GEOREP_STOP/GEOREP_DELETE/GEOREP_PAUSE/GEOREP_RESUME { "nodeid": NODEID, "ts": TIMESTAMP, "event": EVENT_TYPE, "message": { "master": MASTER_VOLUME_NAME, "slave": SLAVE_DETAILS } } GEOREP_CONFIG_SET { "nodeid": NODEID, "ts": TIMESTAMP, "event": GEOREP_CONFIG_SET, "message": { "master": MASTER_VOLUME_NAME, "slave": SLAVE_DETAILS, "option": OPTION_NAME, "value": OPTION_VALUE } } GEOREP_CONFIG_RESET { "nodeid": NODEID, "ts": TIMESTAMP, "event": GEOREP_CONFIG_RESET, "message": { "master": MASTER_VOLUME_NAME, "slave": SLAVE_DETAILS, "option": OPTION_NAME } } BUG: 1363591 Change-Id: I78c81aabd022ebb042b3eae3c6b5a284a6c2801f Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/15077 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com>
generated by cgit (git 2.34.1) at 2024-04-24 00:42:12 +0000