doc: Move outdated documentation to legacy

Change-Id: I0ceba9a993e8b1cdef4ff6a784bfd69c08107d88
BUG: 811311
Signed-off-by: Vijay Bellur <vijay@gluster.com>
Reviewed-on: http://review.gluster.com/3116
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Amar Tumballi <amarts@redhat.com>
Reviewed-by: Anand Avati <avati@redhat.com>

1 files changed, 0 insertions, 309 deletions

diff --git a/doc/hacker-guide/hacker-guide.tex b/doc/hacker-guide/hacker-guide.tex
deleted file mode 100644
index c2d7255d7df..00000000000
--- a/doc/hacker-guide/hacker-guide.tex
+++ /dev/null
@@ -1,309 +0,0 @@
-\documentclass{book}[12pt]
-\usepackage{graphicx}
-% \usepackage{fancyhdr}
-
-% \pagestyle{fancy}
-\begin{document}
-
-% \headheight 117pt
-% \rhead{\includegraphics{zr-logo.eps}}
-
-\author{Gluster}
-\title{GlusterFS 1.3 Hacker's Guide}
-\date{June 1, 2007}
-
-\maketitle
-\frontmatter
-\tableofcontents
-
-\mainmatter
-\chapter{Introduction}
-
-\section{Coding guidelines}
-GlusterFS uses Git for version control. To get the latest source do:
-\begin{verbatim}
-  $ git clone git://git.gluster.com/glusterfs.git glusterfs
-\end{verbatim}
-\noindent
-GlusterFS follows the GNU coding
-standards\footnote{http://www.gnu.org/prep/standards\_toc.html} for the
-most part.
-
-\chapter{Major components}
-\section{libglusterfs}
-\texttt{libglusterfs} contains supporting code used by all the other components. 
-The important files here are:
-
-\texttt{dict.c}: This is an implementation of a serializable dictionary type. It is
-used by the protocol code to send requests and replies. It is also used to pass options
-to translators.
-
-\texttt{logging.c}: This is a thread-safe logging library. The log messages go to a
-file (default \texttt{/usr/local/var/log/glusterfs/*}).
-
-\texttt{protocol.c}: This file implements the GlusterFS on-the-wire
-protocol. The protocol itself is a simple ASCII protocol, designed to
-be easy to parse and be human readable.
-
-A sample GlusterFS protocol block looks like this:
-\begin{verbatim}
-  Block Start                            header
-  0000000000000023                       callid
-  00000001                               type
-  00000016                               op
-  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx       human-readable name
-  00000000000000000000000000000ac3       block size
-  <...>                                  block
-  Block End
-\end{verbatim}
-
-\texttt{stack.h}: This file defines the \texttt{STACK\_WIND} and
-\texttt{STACK\_UNWIND} macros which are used to implement the parallel
-stack that is maintained for inter-xlator calls. See the \textsl{Taking control
-of the stack} section below for more details.
-
-\texttt{spec.y}: This contains the Yacc grammar for the GlusterFS
-specification file, and the parsing code.
-
-
-Draw diagrams of trees
-Two rules:
-(1) directory structure is same
-(2) file can exist only on one node
-
-\section{glusterfs-fuse}
-\section{glusterfsd}
-\section{transport}
-\section{scheduler}
-\section{xlator}
-
-\chapter{xlators}
-\section{Taking control of the stack}
-One can think of STACK\_WIND/UNWIND as a very specific RPC mechanism.
-
-% \includegraphics{stack.eps}
-
-\section{Overview of xlators}
-
-\flushleft{\LARGE\texttt{cluster/}}
-\vskip 2ex
-\flushleft{\Large\texttt{afr}}
-\vskip 2ex
-\flushleft{\Large\texttt{stripe}}
-\vskip 2ex
-\flushleft{\Large\texttt{unify}}
-
-\vskip 4ex
-\flushleft{\LARGE\texttt{debug/}}
-\vskip 2ex
-\flushleft{\Large\texttt{trace}}
-\vskip 2ex
-The trace xlator simply logs all fops and mops, and passes them through to its child.
-
-\vskip 4ex
-\flushleft{\LARGE\texttt{features/}}
-\flushleft{\Large\texttt{posix-locks}}
-\vskip 2ex
-This xlator implements \textsc{posix} record locking semantics over
-any kind of storage.
-
-\vskip 4ex
-\flushleft{\LARGE\texttt{performance/}}
-
-\flushleft{\Large\texttt{io-threads}}
-\vskip 2ex
-\flushleft{\Large\texttt{read-ahead}}
-\vskip 2ex
-\flushleft{\Large\texttt{stat-prefetch}}
-\vskip 2ex
-\flushleft{\Large\texttt{write-behind}}
-\vskip 2ex
-
-\vskip 4ex
-\flushleft{\LARGE\texttt{protocol/}}
-\vskip 2ex
-
-\flushleft{\Large\texttt{client}}
-\vskip 2ex
-
-\flushleft{\Large\texttt{server}}
-\vskip 2ex
-
-\vskip 4ex
-\flushleft{\LARGE\texttt{storage/}}
-\flushleft{\Large\texttt{posix}}
-\vskip 2ex
-The \texttt{posix} xlator is the one which actually makes calls to the
-on-disk filesystem. Currently this is the only storage xlator available. However,
-plans to develop other storage xlators, such as one for Amazon's S3 service, are
-on the roadmap.
-
-\chapter{Writing a simple xlator}
-\noindent
-In this section we're going to write a rot13 xlator. ``Rot13'' is a
-simple substitution cipher which obscures a text by replacing each
-letter with the letter thirteen places down the alphabet. So `a' (0)
-would become `n' (12), `b' would be 'm', and so on.  Rot13 applied to
-a piece of ciphertext yields the plaintext again, because rot13 is its
-own inverse, since:
-
-\[
-x_c = x + 13\; (mod\; 26)
-\]
-\[
-x_c + 13\; (mod\; 26) = x + 13 + 13\; (mod\; 26) = x
-\]
-
-First we include the requisite headers.
-
-\begin{verbatim}
-#include <ctype.h>
-#include <sys/uio.h>
-
-#include "glusterfs.h"
-#include "xlator.h"
-#include "logging.h"
-
-/*
- * This is a rot13 ``encryption'' xlator. It rot13's data when 
- * writing to disk and rot13's it back when reading it. 
- * This xlator is meant as an example, not for production
- *  use ;) (hence no error-checking)
- */
-
-\end{verbatim}
-
-Then we write the rot13 function itself. For simplicity, we only transform lower case
-letters. Any other byte is passed through as it is.
-
-\begin{verbatim}
-/* We only handle lower case letters for simplicity */
-static void 
-rot13 (char *buf, int len)
-{
-  int i;
-  for (i = 0; i < len; i++) {
-    if (isalpha (buf[i]))
-      buf[i] = (buf[i] - 'a' + 13) % 26;
-    else if (buf[i] <= 26)
-      buf[i] = (buf[i] + 13) % 26 + 'a';
-  }
-}
-\end{verbatim}
-
-Next comes a utility function whose purpose will be clear after looking at the code
-below.
-
-\begin{verbatim}
-static void
-rot13_iovec (struct iovec *vector, int count)
-{
-  int i;
-  for (i = 0; i < count; i++) {
-    rot13 (vector[i].iov_base, vector[i].iov_len);
-  }
-}
-\end{verbatim}
-
-\begin{verbatim}
-static int32_t
-rot13_readv_cbk (call_frame_t *frame,
-                 call_frame_t *prev_frame,
-                 xlator_t *this,
-                 int32_t op_ret,
-                 int32_t op_errno,
-                 struct iovec *vector,
-                 int32_t count)
-{
-  rot13_iovec (vector, count);
-
-  STACK_UNWIND (frame, op_ret, op_errno, vector, count);
-  return 0;
-}
-
-static int32_t
-rot13_readv (call_frame_t *frame,
-             xlator_t *this,
-             dict_t *ctx,
-             size_t size,
-             off_t offset)
-{
-  STACK_WIND (frame,
-              rot13_readv_cbk,
-              FIRST_CHILD (this),
-              FIRST_CHILD (this)->fops->readv,
-              ctx, size, offset);
-  return 0;
-}
-
-static int32_t
-rot13_writev_cbk (call_frame_t *frame,
-                  call_frame_t *prev_frame,
-                  xlator_t *this,
-                  int32_t op_ret,
-                  int32_t op_errno)
-{
-  STACK_UNWIND (frame, op_ret, op_errno);
-  return 0;
-}
-
-static int32_t
-rot13_writev (call_frame_t *frame,
-              xlator_t *this,
-              dict_t *ctx,
-              struct iovec *vector,
-              int32_t count, 
-              off_t offset)
-{
-  rot13_iovec (vector, count);
-
-  STACK_WIND (frame, 
-              rot13_writev_cbk,
-              FIRST_CHILD (this),
-              FIRST_CHILD (this)->fops->writev,
-              ctx, vector, count, offset);
-  return 0;
-}
-
-\end{verbatim}
-
-Every xlator must define two functions and two external symbols. The functions are 
-\texttt{init} and \texttt{fini}, and the symbols are \texttt{fops} and \texttt{mops}.
-The \texttt{init} function is called when the xlator is loaded by GlusterFS, and 
-contains code for the xlator to initialize itself. Note that if an xlator is present
-multiple times in the spec tree, the \texttt{init} function will be called each time
-the xlator is loaded.
-
-\begin{verbatim}
-int32_t
-init (xlator_t *this)
-{
-  if (!this->children) {
-    gf_log ("rot13", GF_LOG_ERROR, 
-            "FATAL: rot13 should have exactly one child");
-    return -1;
-  }
-
-  gf_log ("rot13", GF_LOG_DEBUG, "rot13 xlator loaded");
-  return 0;
-}
-\end{verbatim}
-
-\begin{verbatim}
-
-void 
-fini (xlator_t *this)
-{
-  return;
-}
-
-struct xlator_fops fops = {
-  .readv        = rot13_readv,
-  .writev       = rot13_writev
-};
-
-
-\end{verbatim}
-
-\end{document}
-