summaryrefslogtreecommitdiffstats
path: root/doc/admin-guide/en-US
diff options
context:
space:
mode:
authorshravantc <shravantc@ymail.com>2015-04-01 18:31:58 +0530
committerHumble Devassy Chirammal <humble.devassy@gmail.com>2015-04-10 10:49:36 +0000
commit169875397d99bd4357f904468288865723b9fa3a (patch)
treef3dd6c8720e7665195d520ec64576ef5cef04b4c /doc/admin-guide/en-US
parentda2f8d09de5da89e544a0d56a1b46c234d3ecb5b (diff)
doc: update on admin geo replication
updated the geo replication session status added configurable options available for geo replication updated mountbroker for slaves, added simplified steps for auxiliary gluster mount setup for the agent. Change-Id: Ie8dac5ddb945ee93bcb8bc7694d35b0c6c01c606 BUG: 1206539 Signed-off-by: shravantc <shravantc@ymail.com> Reviewed-on: http://review.gluster.org/10103 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com>
Diffstat (limited to 'doc/admin-guide/en-US')
-rw-r--r--doc/admin-guide/en-US/markdown/admin_geo-replication.md249
1 files changed, 121 insertions, 128 deletions
diff --git a/doc/admin-guide/en-US/markdown/admin_geo-replication.md b/doc/admin-guide/en-US/markdown/admin_geo-replication.md
index 47a2f66283f..6c6aaefda9d 100644
--- a/doc/admin-guide/en-US/markdown/admin_geo-replication.md
+++ b/doc/admin-guide/en-US/markdown/admin_geo-replication.md
@@ -128,8 +128,6 @@ and slave nodes within your environment:
time lag, all the changes in brick2 between this period may go
unnoticed during synchronization of files with Slave.
- For more information on setting up NTP, see [][].
-
**To setup Geo-replication for SSH**
Password-less login has to be set up between the host machine (where
@@ -139,13 +137,13 @@ geo-replication Start command will be issued) and the remote machine
1. On the node where geo-replication sessions are to be set up, run the
following command:
- `# ssh-keygen -f /var/lib/glusterd/geo-replication/secret.pem`
+ # ssh-keygen -f /var/lib/glusterd/geo-replication/secret.pem
Press Enter twice to avoid passphrase.
2. Run the following command on master for all the slave hosts:
- `# ssh-copy-id -i /var/lib/glusterd/geo-replication/secret.pem.pub @`
+ # ssh-copy-id -i /var/lib/glusterd/geo-replication/secret.pem.pub @
##Setting Up the Environment for a Secure Geo-replication Slave
@@ -184,7 +182,7 @@ except for the following:
- Slave must have a running instance of glusterd, even if there is
no gluster volume among the mounted slave resources (that is,
- file tree slaves are used exclusively) .
+ file tree slaves are used exclusively).
### Restricting Remote Command Execution
@@ -237,73 +235,66 @@ level access to the particular volume.
**To setup an auxiliary gluster mount for the agent**:
-1. Create a new group. For example, `geogroup`.
+1. In all Slave nodes, create a new group. For example, `geogroup`.
-2. Create a unprivileged account. For example, ` geoaccount`. Make it a
+2. In all Slave nodes, create a unprivileged account. For example, ` geoaccount`. Make it a
member of ` geogroup`.
-3. Create a new directory owned by root and with permissions *0711.*
+3. In all Slave nodes, Create a new directory owned by root and with permissions *0711.*
For example, create a create mountbroker-root directory
`/var/mountbroker-root`.
-4. Add the following options to the glusterd volfile, assuming the name
- of the slave gluster volume as `slavevol`:
-
- `option mountbroker-root /var/mountbroker-root `
-
- `option mountbroker-geo-replication.geoaccount slavevol`
-
- `option geo-replication-log-group geogroup`
+4. In any one of Slave node, Run the following commands to add options to glusterd vol
+file(`/etc/glusterfs/glusterd.vol`)
+ in rpm installations and `/usr/local/etc/glusterfs/glusterd.vol` in Source installation.
- If you are unable to locate the glusterd volfile at
- `/etc/glusterfs/glusterd.vol`, you can create a volfile containing
- both the default configuration and the above options and place it at
- `/etc/glusterfs/`.
+ ```sh
+ gluster system:: execute mountbroker opt mountbroker-root /var/mountbroker-root
+ gluster system:: execute mountbroker opt geo-replication-log-group geogroup
+ gluster system:: execute mountbroker opt rpc-auth-allow-insecure on
+ ```
- A sample glusterd volfile along with default options:
+5. In any one of the Slave node, Add Mountbroker user to glusterd vol file using,
- volume management
- type mgmt/glusterd
- option working-directory /var/lib/glusterd
- option transport-type socket,rdma
- option transport.socket.keepalive-time 10
- option transport.socket.keepalive-interval 2
- option transport.socket.read-fail-log off
+ ```sh
+ gluster system:: execute mountbroker user geoaccount slavevol
+ ```
- option mountbroker-root /var/mountbroker-root
- option mountbroker-geo-replication.geoaccount slavevol
- option geo-replication-log-group geogroup
- end-volume
+ where slavevol is the Slave Volume name
- If you host multiple slave volumes on Slave, you can repeat step 2.
- for each of them and add the following options to the `volfile`:
+ If you host multiple slave volumes on Slave, for each of them and add the following options to the
+volfile using,
- option mountbroker-geo-replication.geoaccount2 slavevol2
- option mountbroker-geo-replication.geoaccount3 slavevol3
+ ```sh
+ gluster system:: execute mountbroker user geoaccount2 slavevol2
+ gluster system:: execute mountbroker user geoaccount3 slavevol3
+ ```
-5. Setup Master to access Slave as `geoaccount@Slave`.
+ To add multiple volumes per mountbroker user,
- You can add multiple slave volumes within the same account
- (geoaccount) by providing comma-separated list (without spaces) as
- the argument of `mountbroker-geo-replication.geogroup`. You can also
- have multiple options of the form `mountbroker-geo-replication.*`.
- It is recommended to use one service account per Master machine. For
- example, if there are multiple slave volumes on Slave for the master
- machines Master1, Master2, and Master3, then create a dedicated
- service user on Slave for them by repeating Step 2. for each (like
- geogroup1, geogroup2, and geogroup3), and then add the following
- corresponding options to the volfile:
+ ```sh
+ gluster system:: execute mountbroker user geoaccount1 slavevol11,slavevol12,slavevol13
+ gluster system:: execute mountbroker user geoaccount2 slavevol21,slavevol22
+ gluster system:: execute mountbroker user geoaccount3 slavevol31
+ ```
+6. Restart `glusterd` service on all Slave nodes.
- `option mountbroker-geo-replication.geoaccount1 slavevol11,slavevol12,slavevol13`
+7. Setup a passwdless SSH from one of the master node to the user on one of the slave node.
+For example, to geoaccount.
- `option mountbroker-geo-replication.geoaccount2 slavevol21,slavevol22`
+8. Create a geo-replication relationship between master and slave to the user by running the
+following command on the master node:
- `option mountbroker-geo-replication.geoaccount3 slavevol31`
+ ```sh
+ gluster volume geo-replication <master_volume> <mountbroker_user>@<slave_host>::<slave_volume> create push-pem [force]
+ ```
- Now set up Master1 to ssh to geoaccount1@Slave, etc.
+9. In the slavenode, which is used to create relationship, run `/usr/libexec/glusterfs/set_geo_rep_pem_keys.sh`
+as a root with user name, master volume name, and slave volume names as the arguments.
- You must restart glusterd after making changes in the configuration
- to effect the updates.
+ ```sh
+ /usr/libexec/glusterfs/set_geo_rep_pem_keys.sh <mountbroker_user> <master_volume> <slave_volume>
+ ```
### Using IP based Access Control
@@ -316,7 +307,7 @@ To set access control based on IP address for file tree slaves:
1. Set a general restriction for accessibility of file tree resources:
- `# gluster volume geo-replication '/*' config allow-network ::1,127.0.0.1 `
+ # gluster volume geo-replication '/*' config allow-network ::1,127.0.0.1
This will refuse all requests for spawning slave agents except for
requests initiated locally.
@@ -324,7 +315,7 @@ To set access control based on IP address for file tree slaves:
2. If you want the to lease file tree at `/data/slave-tree` to Master,
enter the following command:
- `# gluster volume geo-replicationconfig allow-network `
+ # gluster volume geo-replicationconfig allow-network
`MasterIP` is the IP address of Master. The slave agent spawn
request from master will be accepted if it is executed at
@@ -338,7 +329,7 @@ comma-separated lists of CIDR subnets.
If you want to extend IP based access control to gluster slaves, use the
following command:
-`# gluster volume geo-replication '*' config allow-network ::1,127.0.0.1`
+ # gluster volume geo-replication '*' config allow-network ::1,127.0.0.1
##Starting Geo-replication
@@ -350,9 +341,9 @@ functioning correctly.
To start Gluster Geo-replication
-- Start geo-replication between the hosts using the following command:
+- Use the following command to start geo-replication between the hosts:
- `# gluster volume geo-replication start`
+ # gluster volume geo-replication start
For example:
@@ -374,14 +365,12 @@ Geo-replication in your environment.
- Verify the status by issuing the following command on host:
- `# gluster volume geo-replication status`
+ # gluster volume geo-replication status
For example:
- `# gluster volume geo-replication Volume1 example.com:/data/remote_dir status`
-
# gluster volume geo-replication Volume1 example.com:/data/remote_dir status
-
+ # gluster volume geo-replication Volume1 example.com:/data/remote_dir status
MASTER SLAVE STATUS
______ ______________________________ ____________
Volume1 root@example.com:/data/remote_dir Starting....
@@ -394,24 +383,18 @@ geo-replication sessions, as needed.
**To display geo-replication status information**
-- Display information of all geo-replication sessions using the
- following command:
+- Use the following command to display information of all geo-replication sessions:
# gluster volume geo-replication Volume1 example.com:/data/remote_dir status
- MASTER SLAVE STATUS
- ______ ______________________________ ____________
- Volume1 root@example.com:/data/remote_dir Starting....
+- Use the following command to display information of a particular master slave session:
-- Display information of a particular master slave session using the
- following command:
-
- `# gluster volume geo-replication status`
+ # gluster volume geo-replication status
For example, to display information of Volume1 and
example.com:/data/remote\_dir
- `# gluster volume geo-replication Volume1 example.com:/data/remote_dir status`
+ # gluster volume geo-replication Volume1 example.com:/data/remote_dir status
The status of the geo-replication between Volume1 and
example.com:/data/remote\_dir is displayed.
@@ -419,32 +402,38 @@ geo-replication sessions, as needed.
- Display information of all geo-replication sessions belonging to a
master
- `# gluster volume geo-replication MASTER status`
+ # gluster volume geo-replication MASTER status
For example, to display information of Volume1
# gluster volume geo-replication Volume1 example.com:/data/remote_dir status
- MASTER SLAVE STATUS
- ______ ______________________________ ____________
- Volume1 ssh://example.com:gluster://127.0.0.1:remove_volume OK
+ The status of a session could be one of the following:
+
+- **Initializing**: This is the initial phase of the Geo-replication session;
+ it remains in this state for a minute in order to make sure no abnormalities are present.
+
+- **Not Started**: The geo-replication session is created, but not started.
+
+- **Active**: The gsync daemon in this node is active and syncing the data.
- Volume1 ssh://example.com:file:///data/remote_dir OK
+- **Passive**: A replica pair of the active node. The data synchronization is handled by active node.
+ Hence, this node does not sync any data.
- The status of a session could be one of the following four:
+- **Faulty**: The geo-replication session has experienced a problem, and the issue needs to be
+ investigated further.
-- **Starting**: This is the initial phase of the Geo-replication
- session; it remains in this state for a minute, to make sure no
- abnormalities are present.
+- **Stopped**: The geo-replication session has stopped, but has not been deleted.
-- **OK**: The geo-replication session is in a stable state.
+ The Crawl Status can be one of the following:
-- **Faulty**: The geo-replication session has witnessed some
- abnormality and the situation has to be investigated further.
+- **Changelog Crawl**: The changelog translator has produced the changelog and that is being consumed
+ by gsyncd daemon to sync data.
-- **Corrupt**: The monitor thread which is monitoring the
- geo-replication session has died. This situation should not occur
- normally.
+- **Hybrid Crawl**: The gsyncd daemon is crawling the glusterFS file system and generating pseudo
+ changelog to sync data.
+
+- **Checkpoint Status**: Displays the status of the checkpoint, if set. Otherwise, it displays as N/A.
##Configuring Geo-replication
@@ -452,13 +441,32 @@ To configure Gluster Geo-replication
- Use the following command at the Gluster command line:
- `# gluster volume geo-replication config [options]`
+ # gluster volume geo-replication config [options]
For example:
- To view list of all option/value pair, use the following command:
+ Use the following command to view list of all option/value pair:
+
+ # gluster volume geo-replication Volume1 example.com:/data/remote_dir config
+
+####Configurable Options
+
+The following table provides an overview of the configurable options for a geo-replication setting:
- `# gluster volume geo-replication Volume1 example.com:/data/remote_dir config`
+ Option | Description
+ --- | ---
+ gluster-log-file LOGFILE | The path to the geo-replication glusterfs log file.
+ gluster-log-level LOGFILELEVEL| The log level for glusterfs processes.
+ log-file LOGFILE | The path to the geo-replication log file.
+ log-level LOGFILELEVEL | The log level for geo-replication.
+ ssh-command COMMAND | The SSH command to connect to the remote machine (the default is SSH).
+ rsync-command COMMAND | The rsync command to use for synchronizing the files (the default is rsync).
+ use-tarssh true | The use-tarssh command allows tar over Secure Shell protocol. Use this option to handle workloads of files that have not undergone edits.
+ volume_id=UID | The command to delete the existing master UID for the intermediate/slave node.
+ timeout SECONDS | The timeout period in seconds.
+ sync-jobs N | The number of simultaneous files/directories that can be synchronized.
+ ignore-deletes | If this option is set to 1, a file deleted on the master will not trigger a delete operation on the slave. As a result, the slave will remain as a superset of the master and can be used to recover the master in the event of a crash and/or accidental delete.
+ checkpoint [LABEL&#124;now] | Sets a checkpoint with the given option LABEL. If the option is set as now, then the current time will be used as the label.
##Stopping Geo-replication
@@ -467,9 +475,9 @@ of data from Master to Slave) in your environment.
**To stop Gluster Geo-replication**
-- Stop geo-replication between the hosts using the following command:
+- Use the following command to stop geo-replication between the hosts:
- `# gluster volume geo-replication stop `
+ # gluster volume geo-replication stop
For example:
@@ -502,10 +510,6 @@ geo-replication session run the following command on Master:
# gluster volume geo-replication Volume1 root@example.com:/data/remote_dir status
- MASTER SLAVE STATUS
- ______ ______________________________ ____________
- Volume1 root@example.com:/data/remote_dir OK
-
**Before Failure**
Assume that the Master volume had 100 files and was mounted at
@@ -528,11 +532,7 @@ Geo-replication session is changed from "OK" to "Faulty". To view the
status of this geo-replication session run the following command on
Master:
- # gluster volume geo-replication Volume1 root@example.com:/data/remote_dir status
-
- MASTER SLAVE STATUS
- ______ ______________________________ ____________
- Volume1 root@example.com:/data/remote_dir Faulty
+ # gluster volume geo-replication Volume1 root@example.com:/data/remote_dir status
Machine2 is failed and now you can see discrepancy in number of files
between master and slave. Few files will be missing from the master
@@ -540,20 +540,19 @@ volume but they will be available only on slave as shown below.
Run the following command on Client:
- client # ls /mnt/gluster | wc –l
- 52
+ client # ls /mnt/gluster | wc –l
+ 52
Run the following command on slave (example.com):
- Example.com# # ls /data/remote_dir/ | wc –l
- 100
+ Example.com# # ls /data/remote_dir/ | wc –l
+ 100
**To restore data from the slave machine**
-1. Stop all Master's geo-replication sessions using the following
- command:
+1. Use the following command to stop all Master's geo-replication sessions:
- `# gluster volume geo-replication stop`
+ # gluster volume geo-replication stop
For example:
@@ -568,29 +567,27 @@ Run the following command on slave (example.com):
> Repeat `# gluster volume geo-replication stop `command on all
> active geo-replication sessions of master volume.
-2. Replace the faulty brick in the master by using the following
- command:
+2. Use the following command to replace the faulty brick in the master:
- `# gluster volume replace-brick start`
+ # gluster volume replace-brick start
For example:
machine1# gluster volume replace-brick Volume1 machine2:/export/dir16 machine3:/export/dir16 start
Replace-brick started successfully
-3. Commit the migration of data using the following command:
+3. Use the following command to commit the migration of data:
- `# gluster volume replace-brick commit force `
+ # gluster volume replace-brick commit force
For example:
machine1# gluster volume replace-brick Volume1 machine2:/export/dir16 machine3:/export/dir16 commit force
Replace-brick commit successful
-4. Verify the migration of brick by viewing the volume info using the
- following command:
+4. Use the following command to verify the migration of brick by viewing the volume info:
- `# gluster volume info `
+ # gluster volume info
For example:
@@ -611,7 +608,7 @@ Run the following command on slave (example.com):
For example:
- `example.com# rsync -PavhS --xattrs --ignore-existing /data/remote_dir/ client:/mnt/gluster`
+ example.com# rsync -PavhS --xattrs --ignore-existing /data/remote_dir/ client:/mnt/gluster
Verify that the data is synced by using the following command:
@@ -627,10 +624,9 @@ Run the following command on slave (example.com):
Now Master volume and Slave directory is synced.
-6. Restart geo-replication session from master to slave using the
- following command:
+6. Use the following command to restart geo-replication session from master to slave:
- `# gluster volume geo-replication start `
+ # gluster volume geo-replication start
For example:
@@ -650,18 +646,17 @@ geo-replication index, so the recommended way to set the time manually is:
1. Stop geo-replication between the master and slave using the
following command:
- `# gluster volume geo-replication sto`p
+ # gluster volume geo-replication stop
2. Stop the geo-replication indexing using the following command:
- `# gluster volume set geo-replication.indexing of`f
+ # gluster volume set geo-replication.indexing of
-3. Set uniform time on all bricks.s
+3. Set uniform time on all bricks.
-4. Restart your geo-replication sessions by using the following
- command:
+4. Use the following command to restart your geo-replication session:
- `# gluster volume geo-replication start `
+ # gluster volume geo-replication start
**Running Geo-replication commands in one system**
@@ -684,5 +679,3 @@ available in follow-up minor release.
[ Geo-replication over WAN ]: ../images/Geo-Rep_WAN.png
[ Geo-replication over Internet ]: ../images/Geo-Rep03_Internet.png
[ Multi-site cascading Geo-replication ]: ../images/Geo-Rep04_Cascading.png
- []: http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Migration_Planning_Guide/ch04s07.html
- [1]: www.redhat.com/support/