glusterfs.git/xlators/storage, branch v5.0rc0

gfapi: revert several patchs that introduced pre/post attrs

2018-09-17T14:26:06+00:00

Reverted the following:
  - 248152767b0599986bbb6bb35fc27197f6be6964
  - 09943beb499617212f2985ca8ea9ecd1ed1b470e
  - d01f7244e9d9f7e3ef84e0ba7b48ef1b1b09d809

The reverts are redone by hand, due to clang format changes
that made using git to revert the changes more tedious.

Change-Id: I96489638a2b641fb2206a110298543225783f7be
Updates: bz#1628620
Signed-off-by: ShyamsundarR

Land part 2 of clang-format changes

2018-09-12T12:22:45+00:00

Change-Id: Ia84cc24c8924e6d22d02ac15f611c10e26db99b4
Signed-off-by: Nigel Babu

Land clang-format changes

2018-09-12T11:52:48+00:00

Change-Id: I6f5d8140a06f3c1b2d196849299f8d483028d33b

storage/posix: Fix coverity issue - Unchecked return value

2018-09-11T04:15:56+00:00

Fixes CID: 1388886

https://scan6.coverity.com/reports.htm#v42607/p10714/fileInstanceId=85287446&defectInstanceId=25997291&mergedDefectId=1388886

Change-Id: Ic4e558bba7e15d213c07bc31affb2e175ace5502
updates: bz#789278
Signed-off-by: Ashish Pandey

posix: fix the duplicate macro definitions

2018-09-10T12:48:48+00:00

the macro 'PATH_SET_TIMESPEC_OR_TIMEVAL' is defined in posix.h,
which seems to be good place for it

updates: bz#1193929

Change-Id: I521a2a6efeb26891c24637a5f06b1d90c00b1135
Signed-off-by: Amar Tumballi

posix: disable open/read/write on special files

2018-09-06T05:41:15+00:00

In the file system, the responsibility w.r.to the block and char device
files is related to only support for 'creating' them (using mknod(2)).

Once the device files are created, the read/write syscalls for the specific
devices are handled by the device driver registered for the specific major
number, and depending on the minor number, it knows where to read from.
Hence, we are at risk of reading contents from devices which are handled
by the host kernel on server nodes.

By disabling open/read/write on the device file, we would be safe with
the bypass one can achieve from client side (using gfapi)

Fixes: bz#1625096

Change-Id: I48c776b0af1cbd2a5240862826d3d8918601e47f
Signed-off-by: Amar Tumballi

server-protocol: don't allow '../' path in 'name'

2018-09-05T09:23:26+00:00

This will prevent any arbitrary file creation through glusterfs
by modifying the client bits.

Also check for the similar flaw inside posix too, so we prevent any
changes in layers in-between.

Fixes: bz#1625095

Signed-off-by: Amar Tumballi 
Change-Id: Id9fe0ef6e86459e8ed85ab947d977f058c5ae06e

posix: remove not supported get/set content

2018-09-04T12:27:15+00:00

getting and setting a file's content using extended
attribute worked great as a GET/PUT alternative when
an object storage is supported on top of Gluster. But
it needs application changes, and also, it skips some
caching layers. It is not used over years, and not
supported any more. Remove the dead code.

Fixes: bz#1625102

Change-Id: Ide3b3f1f644f6ca58558bbe45561f346f96b95b7
Signed-off-by: Amar Tumballi

{dht-rebalance|glusterd-geo-rep|glusterd-utils|nfs|bd}.c: no dict_del before dict_set

2018-09-04T05:32:10+00:00

There is no need to remove an item before re-setting it.

Compile-tested only!

Change-Id: I2869aec9ebf474859127b8b38d284246e6097e84
updates: bz#1193929
Signed-off-by: Yaniv Kaul

Multiple files: calloc -> malloc

2018-09-04T04:58:14+00:00

xlators/storage/posix/src/posix-inode-fd-ops.c:
xlators/storage/posix/src/posix-helpers.c:
xlators/storage/bd/src/bd.c:
xlators/protocol/client/src/client-lk.c:
xlators/performance/quick-read/src/quick-read.c:
xlators/performance/io-cache/src/page.c
xlators/nfs/server/src/nfs3-helpers.c
xlators/nfs/server/src/nfs-fops.c
xlators/nfs/server/src/mount3udp_svc.c
xlators/nfs/server/src/mount3.c
xlators/mount/fuse/src/fuse-helpers.c
xlators/mount/fuse/src/fuse-bridge.c
xlators/mgmt/glusterd/src/glusterd-utils.c
xlators/mgmt/glusterd/src/glusterd-syncop.h
xlators/mgmt/glusterd/src/glusterd-snapshot.c
xlators/mgmt/glusterd/src/glusterd-rpc-ops.c
xlators/mgmt/glusterd/src/glusterd-replace-brick.c
xlators/mgmt/glusterd/src/glusterd-op-sm.c
xlators/mgmt/glusterd/src/glusterd-mgmt.c
xlators/meta/src/subvolumes-dir.c
xlators/meta/src/graph-dir.c
xlators/features/trash/src/trash.c
xlators/features/shard/src/shard.h
xlators/features/shard/src/shard.c
xlators/features/marker/src/marker-quota.c
xlators/features/locks/src/common.c
xlators/features/leases/src/leases-internal.c
xlators/features/gfid-access/src/gfid-access.c
xlators/features/cloudsync/src/cloudsync-plugins/src/cloudsyncs3/src/libcloudsyncs3.c
xlators/features/bit-rot/src/bitd/bit-rot.c
xlators/features/bit-rot/src/bitd/bit-rot-scrub.c
bxlators/encryption/crypt/src/metadata.c
xlators/encryption/crypt/src/crypt.c
xlators/performance/md-cache/src/md-cache.c:

Move to GF_MALLOC() instead of GF_CALLOC() when possible

It doesn't make sense to calloc (allocate and clear) memory
when the code right away fills that memory with data.
It may be optimized by the compiler, or have a microscopic
performance improvement.

In some cases, also changed allocation size to be sizeof some
struct or type instead of a pointer - easier to read.
In some cases, removed redundant strlen() calls by saving the result
into a variable.

1. Only done for the straightforward cases. There's room for improvement.
2. Please review carefully, especially for string allocation, with the
terminating NULL string.

Only compile-tested!

.. and allocate memory as much as needed.

xlators/nfs/server/src/mount3.c :

Don't blindly allocate PATH_MAX, but strlen() the string and allocate
appropriately.
Also, align error messges.

updates: bz#1193929
Original-Author: Yaniv Kaul 
Signed-off-by: Yaniv Kaul 
Signed-off-by: Yaniv Kaul 
Change-Id: Ibda6f33dd180b7f7694f20a12af1e9576fe197f5