glusterfs.git/xlators/protocol/client/src, branch v5.10

protocol/client: propagte GF_EVENT_CHILD_PING only for connections to brick

2019-08-09T05:03:46+00:00

Two reasons:
* ping responses from glusterd may not be relevant for Halo
  replication. Instead, it might be interested in only knowing whether
  the brick itself is responsive.
* When a brick is killed, propagating GF_EVENT_CHILD_PING of ping
  response from glusterd results in GF_EVENT_DISCONNECT spuriously
  propagated to parent xlators. These DISCONNECT events are from the
  connections client establishes with glusterd as part of its
  reconnect logic. Without GF_EVENT_CHILD_PING, the last event
  propagated to parent xlators would be the first DISCONNECT event
  from brick and hence subsequent DISCONNECTS to glusterd are not
  propagated as protocol/client prevents same event being propagated
  to parent xlators consecutively. propagating GF_EVENT_CHILD_PING for
  ping responses from glusterd would change the last_sent_event to
  GF_EVENT_CHILD_PING and hence protocol/client cannot prevent
  subsequent DISCONNECT events

Signed-off-by: Raghavendra G 
Fixes: bz#1739336
Change-Id: I50276680c52f05ca9e12149a3094923622d6eaef
(cherry picked from commit 5d66eafec581fb3209af74595784be8854ca40a4)

client-rpc: Fix the payload being sent on the wire

2019-04-08T14:14:29+00:00

The fops allocate 3 kind of payload(buffer) in the client xlator:
- fop payload, this is the buffer allocated by the write and put fop
- rsphdr paylod, this is the buffer required by the reply cbk of
  some fops like lookup, readdir.
- rsp_paylod, this is the buffer required by the reply cbk of fops like
  readv etc.

Currently, in the lookup and readdir fop the rsphdr is sent as payload,
hence the allocated rsphdr buffer is also sent on the wire, increasing
the bandwidth consumption on the wire.

With this patch, the issue is fixed.

Fixes: bz#1673058
Change-Id: Ie8158921f4db319e60ad5f52d851fa5c9d4a269b
Signed-off-by: Poornima G

all: fix the format string exceptions

2018-11-09T14:03:02+00:00

Currently, there are possibilities in few places, where a user-controlled
(like filename, program parameter etc) string can be passed as 'fmt' for
printf(), which can lead to segfault, if the user's string contains '%s',
'%d' in it.

While fixing it, makes sense to make the explicit check for such issues
across the codebase, by making the format call properly.

Fixes: CVE-2018-14661

Fixes: bz#1647666
Change-Id: Ib547293f2d9eb618594cbff0df3b9c800e88bde4
Signed-off-by: Amar Tumballi

protocol: remove the option 'verify-volfile-checksum'

2018-11-08T15:47:43+00:00

'getspec' operation is not used between 'client' and 'server' ever since
we have off-loaded volfile management to glusterd, ie, at least 7 years.

No reason to keep the dead code! The removed option had no meaning,
as glusterd didn't provide a way to set (or unset) this option. So,
no regression should be observed from any of the existing glusterfs
deployment, supported or unsupported.

Updates: CVE-2018-14653

Updates: bz#1647664
Change-Id: I4a2e0f673c5bcd4644976a61dbd2d37003a428eb
Signed-off-by: Amar Tumballi

Land part 2 of clang-format changes

2018-09-12T12:22:45+00:00

Change-Id: Ia84cc24c8924e6d22d02ac15f611c10e26db99b4
Signed-off-by: Nigel Babu

Land clang-format changes

2018-09-12T11:52:48+00:00

Change-Id: I6f5d8140a06f3c1b2d196849299f8d483028d33b

Multiple files: calloc -> malloc

2018-09-04T04:58:14+00:00

xlators/storage/posix/src/posix-inode-fd-ops.c:
xlators/storage/posix/src/posix-helpers.c:
xlators/storage/bd/src/bd.c:
xlators/protocol/client/src/client-lk.c:
xlators/performance/quick-read/src/quick-read.c:
xlators/performance/io-cache/src/page.c
xlators/nfs/server/src/nfs3-helpers.c
xlators/nfs/server/src/nfs-fops.c
xlators/nfs/server/src/mount3udp_svc.c
xlators/nfs/server/src/mount3.c
xlators/mount/fuse/src/fuse-helpers.c
xlators/mount/fuse/src/fuse-bridge.c
xlators/mgmt/glusterd/src/glusterd-utils.c
xlators/mgmt/glusterd/src/glusterd-syncop.h
xlators/mgmt/glusterd/src/glusterd-snapshot.c
xlators/mgmt/glusterd/src/glusterd-rpc-ops.c
xlators/mgmt/glusterd/src/glusterd-replace-brick.c
xlators/mgmt/glusterd/src/glusterd-op-sm.c
xlators/mgmt/glusterd/src/glusterd-mgmt.c
xlators/meta/src/subvolumes-dir.c
xlators/meta/src/graph-dir.c
xlators/features/trash/src/trash.c
xlators/features/shard/src/shard.h
xlators/features/shard/src/shard.c
xlators/features/marker/src/marker-quota.c
xlators/features/locks/src/common.c
xlators/features/leases/src/leases-internal.c
xlators/features/gfid-access/src/gfid-access.c
xlators/features/cloudsync/src/cloudsync-plugins/src/cloudsyncs3/src/libcloudsyncs3.c
xlators/features/bit-rot/src/bitd/bit-rot.c
xlators/features/bit-rot/src/bitd/bit-rot-scrub.c
bxlators/encryption/crypt/src/metadata.c
xlators/encryption/crypt/src/crypt.c
xlators/performance/md-cache/src/md-cache.c:

Move to GF_MALLOC() instead of GF_CALLOC() when possible

It doesn't make sense to calloc (allocate and clear) memory
when the code right away fills that memory with data.
It may be optimized by the compiler, or have a microscopic
performance improvement.

In some cases, also changed allocation size to be sizeof some
struct or type instead of a pointer - easier to read.
In some cases, removed redundant strlen() calls by saving the result
into a variable.

1. Only done for the straightforward cases. There's room for improvement.
2. Please review carefully, especially for string allocation, with the
terminating NULL string.

Only compile-tested!

.. and allocate memory as much as needed.

xlators/nfs/server/src/mount3.c :

Don't blindly allocate PATH_MAX, but strlen() the string and allocate
appropriately.
Also, align error messges.

updates: bz#1193929
Original-Author: Yaniv Kaul 
Signed-off-by: Yaniv Kaul 
Signed-off-by: Yaniv Kaul 
Change-Id: Ibda6f33dd180b7f7694f20a12af1e9576fe197f5

protocol: coverity fixes

2018-08-22T06:45:43+00:00

Fixes CID: 1389388 1389320 1274113 1388881 1388623 1124801 1124795

Change-Id: Ia72abc0560c959b0298f42e25abdfc5523755569
updates: bz#789278
Signed-off-by: Bhumika Goyal

xlators: protocol: Fix deferencing pointer after free coverity issues

2018-08-21T05:01:08+00:00

The pointer of type struct iobuf * is getting dereferenced after
getting freed by iobuf_unref function. Therefore, move this function
after all the dereferences of this pointer type.
Also, it is useful coding standard to have iobuf_unref just after
iobref_add. So, move iobref_add too.

Occurences found using Coccinelle script:
@@
identifier rsphdr_iobuf;
expression E;
identifier func;
@@
*iobuf_unref(rsphdr_iobuf);
...
*E = func(rsphdr_iobuf);

Fixes CID: 1390517, 1390278, 1388666, 1356588, 1356587 at [1].
and also some more occurences which were found using the above script but not
caught by Coverity.
[1]. https://scan6.coverity.com/reports.htm#v42388/p10714/fileInstanceId=84384920&defectInstanceId=25600709&mergedDefectId=1388666

Change-Id: I579e9d12698f14e9e24bc926c6efef16bac5c06c
updates: bz#789278
Signed-off-by: Bhumika Goyal

build: rename event.h to gf-event.h

2018-07-27T17:37:32+00:00

Newer FreeBSD versions (noticed with 10.3-RELEASE) provide a event.h
file that on occasion gets included instead of the libglusterfs file.
When this happens, 'struct event_pool' will not be defined and building
will fail with errors like:

    autoscale-threads.c:18:55: error: incomplete definition of type 'struct event_pool'
            int                      thread_count   = pool->eventthreadcount;
                                                      ~~~~^
    autoscale-threads.c:17:16: note: forward declaration of 'struct event_pool'
            struct event_pool       *pool           = ctx->event_pool;
                   ^

This problem is caused by 'pkg-config --cflags uuid' that adds
/usr/local/include to the GF_CPPFLAGS. The use of libuuid is preferred
so that the contrib/uuid/ directory can be removed.

By renaming event.h to gf-event.h there is no conflict between the
different event.h files anymore and compiling on FreeBSD works without
issues.

Change-Id: Ie69f6b8a4f8f8e9630d39a86693eb74674f0f763
Updates: bz#1607319
Signed-off-by: Niels de Vos