glusterfs.git/xlators/protocol/client/src, branch v3.11.0beta1

protocol-client: Initialize the list_head before using

2017-03-27T00:56:19+00:00

In client3_3_readdir(p)_cbk, in case of error conditions,
it is possible that the list_head is used before initializing.
Hence move the initialization before usage.

Change-Id: Ie58902d079fdc58416d17b5fa5f61375decb1c99
BUG: 1435943
Signed-off-by: Poornima G 
Reviewed-on: https://review.gluster.org/16948
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra G

rpc/clnt: remove locks while notifying CONNECT/DISCONNECT

2017-03-01T14:35:48+00:00

Locking during notify was introduced as part of commit
aa22f24f5db7659387704998ae01520708869873 [1]. The fix was introduced
to fix out-of-order CONNECT/DISCONNECT events from rpc-clnt to parent
xlators [2]. However as part of handling DISCONNECT protocol/client
does unwind saved frames (with failure) waiting for responses. This
saved_frames_unwind can be a costly operation and hence ideally
shouldn't be included in the critical section of notifylock, as it
unnecessarily delays the reconnection to same brick. Also, its not a
good practise to pass control to other xlators holding a lock as it
can lead to deadlocks. So, this patch removes locking in rpc-clnt
while notifying parent xlators.

To fix [2], two changes are present in this patch:

* notify DISCONNECT before cleaning up rpc connection (same as commit
  a6b63e11b7758cf1bfcb6798, patch [3]).
* protocol/client uses rpc_clnt_cleanup_and_start, which cleans up rpc
  connection and does a start while handling a DISCONNECT event from
  rpc. Note that patch [3] was reverted as rpc_clnt_start called in
  quick_reconnect path of protocol/client didn't invoke connect on
  transport as the connection was not cleaned up _yet_ (as cleanup was
  moved post notification in rpc-clnt). This resulted in clients never
  attempting connect to bricks.

Note that one of the neater ways to fix [2] (without using locks) is
to introduce generation numbers to map CONNECT and DISCONNECTS across
epochs and ignore DISCONNECT events if they don't belong to current
epoch. However, this approach is a bit complex to implement and
requires time. So, current patch is a hacky stop-gap fix till we come
up with a more cleaner solution.

[1] http://review.gluster.org/15916
[2] https://bugzilla.redhat.com/show_bug.cgi?id=1386626
[3] http://review.gluster.org/15681

Change-Id: I62daeee8bb1430004e28558f6eb133efd4ccf418
Signed-off-by: Raghavendra G 
BUG: 1427012
Reviewed-on: https://review.gluster.org/16784
Smoke: Gluster Build System 
Reviewed-by: Milind Changire 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

protocol/client: Add gfid in request for better tcpdumps

2017-02-28T04:28:07+00:00

It is difficult to match opendir/releasedir or
open/release calls without gfid associlation to find
fd-leaks on the bricks. So assigning gfid also in
the request which was already there in the on-wire
format.

BUG: 1425676
Change-Id: Iec908eeaa2f97295d45140a529b7f8fb834a1553
Signed-off-by: Pranith Kumar K 
Reviewed-on: https://review.gluster.org/16706
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra G

libglusterfs, gfdb, glusterfs: Add missing breaks

2017-02-26T16:29:26+00:00

A few switches did not have breaks causing fall throughs. Most of them
have been fixed with fall through comments for those that are
intentional.

Change-Id: I84c85726b542f38504b50fefab5eba5dbcd27a07
BUG: 1424894
Signed-off-by: Nigel Babu 
Reviewed-on: https://review.gluster.org/16677
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Smoke: Gluster Build System 
Reviewed-by: Jeff Darcy 
Reviewed-by: Shyamsundar Ranganathan

protocol/client: Fix double free of client fdctx destroy

2017-02-13T11:29:23+00:00

This patch fixes the race between fd re-open code and fd release code,
both of which free the fd context due to a race in certain variable
checks as explained below:

1. client process (shd in the case of this BZ) sends an opendir to its
children (client xlators) which send the fop to the bricks to get a valid fd.

2. Client xlator loses connection to the brick. fdctx->remotefd is -1

3. Client re-establishes connection. After handshake, it reopens the dir
and sets fdctx->remotefd to a valid fd in client3_3_reopendir_cbk().

4. Meanwhile, shd sends a fd unref after it is done with the opendir.
This triggers a releasedir (since fd->refcount becomes 0).

5. client3_3_releasedir() sees that fdctx-->remotefd is a valid number
(i.e not -1), sets fdctx->released=1 and calls  client_fdctx_destroy()

6. As a continuation of step3, client_reopen_done() is called by
client3_3_reopendir_cbk(), which sees that fdctx->released==1 and
again calls client_fdctx_destroy().

Depending on when step-5 does GF_FREE(fdctx), we may crash at any place in
step-6 in client3_3_reopendir_cbk() when it tries to access
fdctx->{whatever}.

Change-Id: Ia50873d11763e084e41d2a1f4d53715438e5e947
BUG: 1418629
Signed-off-by: Ravishankar N 
Reviewed-on: https://review.gluster.org/16521
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri

core: run many bricks within one glusterfsd process

2017-01-31T00:13:58+00:00

This patch adds support for multiple brick translator stacks running
in a single brick server process.  This reduces our per-brick memory usage by
approximately 3x, and our appetite for TCP ports even more.  It also creates
potential to avoid process/thread thrashing, and to improve QoS by scheduling
more carefully across the bricks, but realizing that potential will require
further work.

Multiplexing is controlled by the "cluster.brick-multiplex" global option.  By
default it's off, and bricks are started in separate processes as before.  If
multiplexing is enabled, then *compatible* bricks (mostly those with the same
transport options) will be started in the same process.

Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb
BUG: 1385758
Signed-off-by: Jeff Darcy 
Reviewed-on: https://review.gluster.org/14763
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Vijay Bellur

gluster: Typos in logs and comments

2017-01-19T20:37:08+00:00

Replaced 'recieve' with 'receive'.

Change-Id: I4c1c9147db5437feb81e4c83ed074440aaa28e07
BUG: 1414645
Signed-off-by: N Balachandran 
Reviewed-on: http://review.gluster.org/16429
Smoke: Gluster Build System 
Reviewed-by: Manikandan Selvaganesh 
Tested-by: Manikandan Selvaganesh 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

glusterd: Add info on op-version for clients in vol status output

2017-01-12T18:20:59+00:00

Currently the `gluster volume status  clients` command
gives us the following information on clients:
1. Brick name
2. Client count for each brick
3. hostname:port for each client
4. Bytes read and written for each client

There is no information regarding op-version for each client. This
patch adds that to the output.

Change-Id: Ib2ece93ab00c234162bb92b7c67a7d86f3350a8d
BUG: 1409078
Signed-off-by: Samikshan Bairagya 
Reviewed-on: http://review.gluster.org/16303
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee

socket: socket disconnect should wait for poller thread exit

2016-12-22T04:49:19+00:00

When SSL is enabled or if "transport.socket.own-thread" option is set
then socket_poller is run as different thread. Currently during
disconnect or PARENT_DOWN scenario we don't wait for this thread
to terminate. PARENT_DOWN will disconnect the socket layer and
cleanup resources used by socket_poller.

Therefore before disconnect we should wait for poller thread to exit.

Change-Id: I71f984b47d260ffd979102f180a99a0bed29f0d6
BUG: 1404181
Signed-off-by: Rajesh Joseph 
Reviewed-on: http://review.gluster.org/16141
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Kaushal M 
Reviewed-by: Raghavendra Talur 
Reviewed-by: Raghavendra G

client,server: Free xdr-allocated compound req/rsp arrays

2016-12-21T06:58:33+00:00

Change-Id: I9e1829f4f73f001bba33005032e030f289e8d003
BUG: 1406252
Signed-off-by: Krutika Dhananjay 
Reviewed-on: http://review.gluster.org/16210
Smoke: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System