glusterfs.git/xlators/protocol/auth/addr/src, branch v3.11.2

cli/auth : auth.allow and auth.reject does not accept FQDN/host name

2017-04-10T05:10:28+00:00

Problem : At the time of set FQDN name to "auth.allow/auth.reject" through
           gluster cli,it does not accept FQDN/host name.

Solution: Condition needs to be update in verify_host_name and gf_auth
           to accept FQDN/host name.

Fix : Change the condition to accept FQDN/host Name.
      To verify the patch followed below procedure
      1) Try to set FQDN name for auth.allow or auth.reject parameter
         gluster v set myvol auth.reject 
         It gives error "fqdn-name" is not a valid internet-address-list
      2) After apply the patch it does not give any error.
      3) To verify auth.allow/reject try to mount volume on some client.

Change-Id: Ieb76cbb93d43323fd29c7ca04efe3790edb4281b
BUG: 1321578
Signed-off-by: Mohit Agrawal 
Reviewed-on: https://review.gluster.org/15086
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Niels de Vos 
Reviewed-by: Atin Mukherjee 
Reviewed-by: Raghavendra G

protocol : fix auth-allow regression

2017-03-30T05:56:59+00:00

One of the brick multiplexing patches (commit 1a95fc3) had some changes
in gf_auth () & server_setvolume () functions which caused auth-allow
feature to be broken. mount doesn't succeed even if it's part of the
auth-allow list. This fix does the following:

1. Reintroduce the peer-info data back in gf_auth () so that fnmatch has
valid input and it can decide on the result.

2. config-params dict should capture key values pairs for all the bricks
in case brick multiplexing is on. In case brick multiplexing isn't
enabled, then config-params should carry attributes from protocol/server
such that all rpc auth related attributes stay in tact in the
dictionary.

Change-Id: I007c4c6d78620a896b8858a29459a77de8b52412
BUG: 1433815
Signed-off-by: Atin Mukherjee 
Reviewed-on: https://review.gluster.org/16920
Tested-by: Jeff Darcy 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy 
Reviewed-by: MOHIT AGRAWAL

core: run many bricks within one glusterfsd process

2017-01-31T00:13:58+00:00

This patch adds support for multiple brick translator stacks running
in a single brick server process.  This reduces our per-brick memory usage by
approximately 3x, and our appetite for TCP ports even more.  It also creates
potential to avoid process/thread thrashing, and to improve QoS by scheduling
more carefully across the bricks, but realizing that potential will require
further work.

Multiplexing is controlled by the "cluster.brick-multiplex" global option.  By
default it's off, and bricks are started in separate processes as before.  If
multiplexing is enabled, then *compatible* bricks (mostly those with the same
transport options) will be started in the same process.

Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb
BUG: 1385758
Signed-off-by: Jeff Darcy 
Reviewed-on: https://review.gluster.org/14763
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Vijay Bellur

build: out-of-tree builds generates files in the wrong directory

2016-09-18T16:34:37+00:00

And minor cleanup of a few of the Makefile.am files while we're
at it.

Rewrite the make rules to do what xdrgen does. Now we can get rid
of xdrgen.

Note 1. netbsd6's sed doesn't do -i. Why are we still running
smoke tests on netbsd6 and not netbsd7? We barely support netbsd7
as it is.

Note 2. Why is/was libgfxdr.so (.../rpc/xdr/src/...) linked with
libglusterfs? A cut-and-paste mistake? It has no references to
symbols in libglusterfs.

Note3. "/#ifndef\|#define\|#endif/" (note the '\'s) is a _basic_
regex that matches the same lines as the _extended_ regex
"/#(ifndef|define|endif)/". To match the extended regex sed needs to
be run with -r on Linux; with -E on *BSD. However NetBSD's and
FreeBSD's sed helpfully also provide -r for compatibility. Using a
basic regex avoids having to use a kludge in order to run sed with
the correct option on OS X.

Note 4. Not copying the bit of xdrgen that inserts copyright/license
boilerplate. AFAIK it's silly to pretend that machine generated
files like these can be copyrighted or need license boilerplate.
The XDR source files have their own copyright and license; and
their copyrights are bound to be more up to date than old
boilerplate inserted by a script. From what I've seen of other
Open Source projects -- e.g. gcc and its C parser files generated
by yacc and lex -- IIRC they don't bother to add copyright/license
boilerplate to their generated files.

It appears that it's a long-standing feature of make (SysV, BSD,
gnu) for out-of-tree builds to helpfully pretend that the source
files it can find in the VPATH "exist" as if they are in the $cwd.
rpcgen doesn't work well in this situation and generates files
with "bad" #include directives.

E.g. if you `rpcgen ../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.x`,
you get an #include directive in the generated .c file like this:

  ...
  #include "../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.h"
  ...

which (obviously) results in compile errors on out-of-tree build
because the (generated) header file doesn't exist at that location.
Compared to `rpcgen ./glusterfs3-xdr.x` where you get:

  ...
  #include "glusterfs3-xdr.h"
  ...

Which is what we need. We have to resort to some Stupid Make Tricks
like the addition of various .PHONY targets to work around the VPATH
"help".

Warning: When doing an in-tree build, -I$(top_builddir)/rpc/xdr/...
looks exactly like -I$(top_srcdir)/rpc/xdr/...  Don't be fooled though.
And don't delete the -I$(top_builddir)/rpc/xdr/... bits

Change-Id: Iba6ab96b2d0a17c5a7e9f92233993b318858b62e
BUG: 1330604
Signed-off-by: Kaleb S KEITHLEY 
Reviewed-on: http://review.gluster.org/14085
Tested-by: Niels de Vos 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Niels de Vos

build: do not #include "config.h" in each file

2015-05-29T12:43:17+00:00

Instead of including config.h in each file, and have the additional
config.h included from the compiler commandline (-include option).

When a .c file tests for a certain #define, and config.h was not
included, incorrect assumtions were made. With this change, it can not
happen again.

BUG: 1222319
Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/10808
Tested-by: Gluster Build System 
Tested-by: NetBSD Build System
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Pranith Kumar Karampuri

protocol/auth: Fix a possible double free.

2014-02-20T03:25:34+00:00

Assign NULL to addr_cpy to avoid double free.

Fix for coverity CID: 1124891

Change-Id: I0cd6721f066170190d8b5441ecdbc1704ed5e75b
BUG: 789278
Signed-off-by: Raghavendra Talur 
Reviewed-on: http://review.gluster.org/6993
Tested-by: Gluster Build System 
Reviewed-by: Krishnan Parthasarathi 
Reviewed-by: Anand Avati

dual license: update remaining files with correct license text

2013-10-24T14:58:19+00:00

Sayan Saha has previously approved changing everthing to dual license
but somehow we have missed changing these files.

I am explicitly not updating the copyright dates as nothing else that's
copyrightable has changed in these files with the license change

Change-Id: Ia965eeb7168447d69e28e939ad95ee388873b6e4
BUG: 951549
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/6128
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

Use proper libtool option -avoid-version instead of bogus -avoidversion

2013-02-07T23:12:56+00:00

Change-Id: I1c9541058c7d07786539a3266ca125a6a15287d8
BUG: 859835
Signed-off-by: Anand Avati 
Original-author: Kacper Kowalik (Xarthisius) 
Signed-off-by: Kacper Kowalik (Xarthisius) 
Reviewed-on: http://review.gluster.org/3967
Tested-by: Gluster Build System

build: split CPPFLAGS from CFLAGS

2012-10-03T19:26:45+00:00

Automake provides a separate variable for preprocessor flags
(*_CPPFLAGS). They are already uses in a few places, so make it
consistent and use it everywhere. Note that cflags obtained from
pkg-config often are cppflags, which is why LIBXML2_CFLAGS moves with
into AM_CPPFLAGS, for example.

Change-Id: I15feed1d18b2ca497371271c4b5876d5ec6289dd
BUG: 862082
Original-author: Jan Engelhardt 
Signed-off-by: Jan Engelhardt 
Signed-off-by: Jeff Darcy 
Reviewed-on: http://review.gluster.org/4029
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

build: remove useless explicit -fPIC -shared from

2012-10-03T19:24:59+00:00

 CFLAGS

libtool will automatically add "-fPIC" to the compiler command line as
needed, so there is no need to specify it separately.

"-shared" is normally a linker flag and has an odd effect when used with
libtool --mode=compile, namely that it inhibits production of static
objects. For that however, using AC_DISABLE_STATIC is a lot simpler.

Change-Id: Ic4cba0fad18ffd985cf07f8d6951a976ae59a48f
BUG: 862082
Original-author: Jan Engelhardt 
Signed-off-by: Jan Engelhardt 
Signed-off-by: Jeff Darcy 
Reviewed-on: http://review.gluster.org/4027
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati