glusterfs.git/xlators/mount/fuse/src/fuse-bridge.c, branch v3.12.2 fuse/readdirp: Remove need_lookup from fuse_readdirp_cbk 2017-10-12T18:41:46+00:00 Susant Palai spalai@redhat.com 2017-08-07T09:49:47+00:00 dfd6f6b5f5a1d3ea7c4f0cdeab09effc2c866641 background: Various xlators used to populate their ctx, on an explicit lookup. That means without a lookup, the translator will have either null or stale data to function. E.g. dht would depend on lookup to create linkto files on the correct node/hashed subvol, afr would rely on this lookup to heal pending data/metadata etc. So to complete above actions a lookup used to be issued on files, even their inode was populated on a readdirp_cbk. This was done by setting the need_lookup flag on all the files those were read on readdirp fop. We tried a small test on "ACL client". For listing 50k files on root itself, it took around 50seconds with readdirp enabled while the same operation took 5-6 seconds with readdirp disabled. Both the times md-cache was enabled. We observed that on the 1st test case (readdirp enabled), post readdirp a getxattr is done. The number of getxattr depends on the number of acl xattrs (I saw requests on these two: system.posix_acl_default, system.posix_acl_access). Since need_lookup flag is set, during fuse_resolve a nameless lookup is executed on the inode(getxattr being inode operation, hence the nameless lookup). Since md-cache does not serve nameless lookup, a network hop is needed for each file, costing the time. With readdirp disabled, the getxattrs are served from md-cache itself(note: we are discussing the 2nd attempt of ls -l use case). _Current affairs around need of lookup for a file to populate it's ctx_: For the xlators on client stack we discussed quite extensively about the need for a lookup fop post readdirp in all three cluster translators - afr, EC and dht. EC and dht don't really need a nameless lookup post readdirp. For afr too, the need for lookup was negated with patch (http://review.gluster.org/6010 - AFRV2), where afr added a function called afr_inode_refresh() which does a lookup and populates its inode context in case a FOP came to AFR without a lookup being issued prior to it. We ran a thread on gluster-devel asking for feedback on the need of explicit lookup post readdirp. For responses refer [1]. Refer [2] for discussions happened on gerrit. After gathering inputs from [1] and [2], it looks like there is no xlator in current state that requires an explicit lookup post readdirp to function properly. * A separate similar patch will be sent for gfapi/nfs/nfs-ganesha. Note: Only file's inode is built with readdirp. [1] http://lists.gluster.org/pipermail/gluster-devel/2017-August/053505.html [2] https://review.gluster.org/#/c/17985/ > Change-Id: Ie1d68ce7bea5e1f8a1fab9a62217f478322554f5 > BUG: 1492996 > Signed-off-by: Susant Palai <spalai@redhat.com> Change-Id: Ie1d68ce7bea5e1f8a1fab9a62217f478322554f5 BUG: 1499123 Signed-off-by: Susant Palai <spalai@redhat.com> 
background: Various xlators used to populate their ctx, on
an explicit lookup. That means without a lookup, the translator will have
either null or stale data to function. E.g. dht would depend on lookup to
create linkto files on the correct node/hashed subvol, afr would rely on
this lookup to heal pending data/metadata etc.

So to complete above actions a lookup used to be issued on files,
even their inode was populated on a readdirp_cbk. This was done
by setting the need_lookup flag on all the files those were read
on readdirp fop.

We tried a small test on "ACL client". For listing 50k files on root
itself, it took around 50seconds with readdirp enabled while
the same operation took 5-6 seconds with readdirp disabled. Both the
times md-cache was enabled.

We observed that on the 1st test case (readdirp enabled), post readdirp
a getxattr is done. The number of getxattr depends on the number of acl
xattrs (I saw requests on these two: system.posix_acl_default,
system.posix_acl_access). Since need_lookup flag is set, during fuse_resolve
a nameless lookup is executed on the inode(getxattr being inode operation,
hence the nameless lookup). Since md-cache does not serve nameless lookup,
a network hop is needed for each file, costing the time.

With readdirp disabled, the getxattrs are served from md-cache itself(note:
we are discussing the 2nd attempt of ls -l use case).

_Current affairs around need of lookup for a file to populate it's ctx_:

For the xlators on client stack we discussed quite extensively about the need
for a lookup fop post readdirp in all three cluster translators - afr, EC and
dht. EC and dht don't really need a nameless lookup post readdirp. For afr too,
the need for lookup was negated with patch (http://review.gluster.org/6010 - AFRV2),
where  afr added a function called afr_inode_refresh() which does a lookup and
populates its inode context in case a FOP came to AFR without a lookup being issued
prior to it.

We ran a thread on gluster-devel asking for feedback on the need of explicit lookup
post readdirp. For responses refer [1]. Refer [2] for discussions happened on gerrit.
After gathering inputs from [1] and [2], it looks like there is no xlator in
current state that requires an explicit lookup post readdirp to function properly.

* A separate similar patch will be sent for gfapi/nfs/nfs-ganesha.

Note: Only file's inode is built with readdirp.

[1] http://lists.gluster.org/pipermail/gluster-devel/2017-August/053505.html
[2] https://review.gluster.org/#/c/17985/

> Change-Id: Ie1d68ce7bea5e1f8a1fab9a62217f478322554f5
> BUG: 1492996
> Signed-off-by: Susant Palai <spalai@redhat.com>

Change-Id: Ie1d68ce7bea5e1f8a1fab9a62217f478322554f5
BUG: 1499123
Signed-off-by: Susant Palai <spalai@redhat.com>
mount/fuse: Make event-history feature configurable 2017-10-05T12:02:42+00:00 Krutika Dhananjay kdhananj@redhat.com 2017-09-07T13:18:34+00:00 761942e9fe8f6d7bbd5c56720e52dc4f6663cd9f ... and disable it by default. Backport of: > Change-Id: Ia533788d309c78688a315dc8cd04d30fad9e9485 > Reviewed-on: https://review.gluster.org/18242 > BUG: 1467614 > cherry-picked from commit 956d43d6e89d40ee683547003b876f1f456f03b6 This is because having it disabled seems to improve performance. This could be due to the lock contention by the different epoll threads on the circular buff lock in the fop cbks just before writing their response to /dev/fuse. Just to provide some data - wrt ovirt-gluster hyperconverged environment, I saw an increase in IOPs by 12K with event-history disabled for randrom read workload. Usage: mount -t glusterfs -o event-history=on $HOSTNAME:$VOLNAME $MOUNTPOINT OR glusterfs --event-history=on --volfile-server=$HOSTNAME --volfile-id=$VOLNAME $MOUNTPOINT Change-Id: Ia533788d309c78688a315dc8cd04d30fad9e9485 BUG: 1495397 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> 
... and disable it by default.

        Backport of:
        > Change-Id: Ia533788d309c78688a315dc8cd04d30fad9e9485
        > Reviewed-on: https://review.gluster.org/18242
        > BUG: 1467614
        > cherry-picked from commit 956d43d6e89d40ee683547003b876f1f456f03b6

This is because having it disabled seems to improve performance.
This could be due to the lock contention by the different epoll threads
on the circular buff lock in the fop cbks just before writing their response
to /dev/fuse.

Just to provide some data - wrt ovirt-gluster hyperconverged
environment, I saw an increase in IOPs by 12K with event-history
disabled for randrom read workload.

Usage:
mount -t glusterfs -o event-history=on $HOSTNAME:$VOLNAME $MOUNTPOINT
OR
glusterfs --event-history=on --volfile-server=$HOSTNAME --volfile-id=$VOLNAME $MOUNTPOINT

Change-Id: Ia533788d309c78688a315dc8cd04d30fad9e9485
BUG: 1495397
Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com>
mount/fuse: Include sub-directory in source argument for mount() 2017-09-11T18:23:18+00:00 Vijay Bellur vbellur@redhat.com 2017-09-06T03:58:15+00:00 68944b104952751b5bd551fe1d84a6bb20962484 With this, mount of a sub-directory 'foo' gets listed in /proc/mounts as: <hostname>:<volname>/foo on /mnt/glusterfs type fuse.glusterfs (rw,relatime...) Signed-off-by: Vijay Bellur <vbellur@redhat.com> BUG: 1490493 Change-Id: Ib1e1ac3741bf66e1a912d792f2948b748931f2b0 Reviewed-on: https://review.gluster.org/18210 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> (cherry picked from commit 84f8fb81d73b87463092eb082a5cc6a4055103f4) 
With this, mount of a sub-directory 'foo' gets listed in /proc/mounts as:

<hostname>:<volname>/foo on /mnt/glusterfs type fuse.glusterfs (rw,relatime...)

Signed-off-by: Vijay Bellur <vbellur@redhat.com>
BUG: 1490493
Change-Id: Ib1e1ac3741bf66e1a912d792f2948b748931f2b0
Reviewed-on: https://review.gluster.org/18210
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Amar Tumballi <amarts@redhat.com>
(cherry picked from commit 84f8fb81d73b87463092eb082a5cc6a4055103f4)
libglusterfs: Name threads on creation 2017-07-19T14:16:19+00:00 Raghavendra Talur rtalur@redhat.com 2017-07-18T06:06:19+00:00 33db9aff1deaa028f30516e49fdb1e8d6e31bb73 Set names to threads on creation for easier debugging. Output of top -H -p <PID-OF-GLUSTERFSD> Before: 19773 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19774 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19775 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19776 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19777 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19778 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19779 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19780 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19781 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19782 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19783 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19784 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19785 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterfsd 19786 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterfsd 19787 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterfsd 19789 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19790 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 25178 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 5398 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 7881 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd After: 19773 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19774 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustertimer 19775 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19776 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustermemsweep 19777 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustersproc0 19778 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustersproc1 19779 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterepoll0 19780 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusteridxwrker 19781 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusteriotwr0 19782 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterbrssign 19783 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterbrswrker 19784 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterclogecon 19785 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterclogd0 19786 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterclogd1 19787 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterclogd2 19789 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterposixjan 19790 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterposixfsy 25178 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterepoll1 5398 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterepoll2 7881 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterposixhc Change-Id: Id5f333755c1ba168a2ffaa4fce6e71c375e10703 BUG: 1254002 Updates: #271 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: https://review.gluster.org/11926 Reviewed-by: Prashanth Pai <ppai@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> 
Set names to threads on creation for easier
debugging.

Output of top -H -p <PID-OF-GLUSTERFSD>
Before:
19773 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19774 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19775 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19776 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19777 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19778 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19779 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19780 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19781 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19782 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19783 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19784 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19785 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.01 glusterfsd
19786 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.01 glusterfsd
19787 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.01 glusterfsd
19789 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19790 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
25178 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
 5398 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
 7881 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd

After:
19773 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19774 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glustertimer
19775 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19776 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glustermemsweep
19777 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glustersproc0
19778 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glustersproc1
19779 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterepoll0
19780 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusteridxwrker
19781 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusteriotwr0
19782 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterbrssign
19783 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterbrswrker
19784 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterclogecon
19785 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.01 glusterclogd0
19786 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.01 glusterclogd1
19787 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.01 glusterclogd2
19789 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterposixjan
19790 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterposixfsy
25178 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterepoll1
 5398 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterepoll2
 7881 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterposixhc

Change-Id: Id5f333755c1ba168a2ffaa4fce6e71c375e10703
BUG: 1254002
Updates: #271
Signed-off-by: Raghavendra Talur <rtalur@redhat.com>
Reviewed-on: https://review.gluster.org/11926
Reviewed-by: Prashanth Pai <ppai@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
fuse: memory leak fixes 2017-07-14T09:35:24+00:00 Danny Couture couture.danny@gmail.com 2017-07-05T13:55:17+00:00 5ee383fed9f6408d303aa539dda071275021f8e4 Fix fuse ctx memory leak in case an error occurs and the cleanup path is different than usual. Also fix a memory leak in logging if eh_save_history() fails. Change-Id: I7ec967c807b0ed91184e5b958be70702215c46c9 BUG: 1470220 Signed-off-by: Danny Couture <couture.danny@gmail.com> Reviewed-on: https://review.gluster.org/17759 Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Amar Tumballi <amarts@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> 
Fix fuse ctx memory leak in case an error occurs and the cleanup path
is different than usual. Also fix a memory leak in logging if
eh_save_history() fails.

Change-Id: I7ec967c807b0ed91184e5b958be70702215c46c9
BUG: 1470220
Signed-off-by: Danny Couture <couture.danny@gmail.com>
Reviewed-on: https://review.gluster.org/17759
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: N Balachandran <nbalacha@redhat.com>
Reviewed-by: Prashanth Pai <ppai@redhat.com>
Reviewed-by: Amar Tumballi <amarts@redhat.com>
Tested-by: Amar Tumballi <amarts@redhat.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
fuse-bridge: cleanup first_lookup() 2017-05-30T18:03:58+00:00 Amar Tumballi amarts@redhat.com 2017-04-18T07:10:36+00:00 d9978c3b2be3eefc4cd19b61cf99fa20dab77a0d use syncop_lookup instead of synchronising stack_wind/unwind again. Updates #175 Change-Id: Iad4a181d8601235a999039979bfb7ec688675520 Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: https://review.gluster.org/17075 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Prashanth Pai <ppai@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> 
use syncop_lookup instead of synchronising stack_wind/unwind again.

Updates #175

Change-Id: Iad4a181d8601235a999039979bfb7ec688675520
Signed-off-by: Amar Tumballi <amarts@redhat.com>
Reviewed-on: https://review.gluster.org/17075
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Reviewed-by: Prashanth Pai <ppai@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
fuse: implement "-oauto_unmount" 2017-05-23T13:21:25+00:00 Csaba Henk csaba@redhat.com 2017-05-09T17:26:40+00:00 461888bb63b2409f8245c7766aa799ca22f734e6 libfuse has an auto_unmount option which, if enabled, ensures that the file system is unmounted at FUSE server termination by running a separate monitor process that performs the unmount when that occurs. (This feature would probably better be called "robust auto-unmount", as FUSE servers usually do try to unmount their file systems upon termination, it's just this mechanism is not crash resilient.) This change implements that option and behavior for glusterfs. Note that "auto unmount" (robust or not) is a leaky abstraction, as the kernel cannot guarantee that at the path where the FUSE fs is mounted is actually the toplevel mount at the time of the umount(2) call, for multiple reasons, among others, see: fuse-devel: "fuse: feasible to distinguish between umount and abort?" http://fuse.996288.n3.nabble.com/fuse-feasible-to-distinguish-between-umount-and-abort-tt14358.html https://github.com/libfuse/libfuse/issues/122 Updates #153 Change-Id: Ia4432580c9fd2c156d9c73c3a44f4bfd42437599 Signed-off-by: Csaba Henk <csaba@redhat.com> Reviewed-on: https://review.gluster.org/17230 Tested-by: Amar Tumballi <amarts@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> 
libfuse has an auto_unmount option which,
if enabled, ensures that the file system
is unmounted at FUSE server termination
by running a separate monitor process
that performs the unmount when that
occurs. (This feature would probably
better be called "robust auto-unmount",
as FUSE servers usually do try to unmount
their file systems upon termination,
it's just this mechanism is not crash
resilient.)

This change implements that option and
behavior for glusterfs.

Note that "auto unmount" (robust or not) is
a leaky abstraction, as the kernel cannot
guarantee that at the path where the FUSE
fs is mounted is actually the toplevel mount
at the time of the umount(2) call, for
multiple reasons, among others, see:

  fuse-devel: "fuse: feasible to distinguish between umount and abort?"
  http://fuse.996288.n3.nabble.com/fuse-feasible-to-distinguish-between-umount-and-abort-tt14358.html
  https://github.com/libfuse/libfuse/issues/122

Updates #153

Change-Id: Ia4432580c9fd2c156d9c73c3a44f4bfd42437599
Signed-off-by: Csaba Henk <csaba@redhat.com>
Reviewed-on: https://review.gluster.org/17230
Tested-by: Amar Tumballi <amarts@redhat.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Amar Tumballi <amarts@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
mount/fuse: Handle racing notify on more than one graph properly 2017-05-10T09:14:30+00:00 Raghavendra G rgowdapp@redhat.com 2016-11-10T05:26:26+00:00 e71119e942eb016ba5a11c3f986715f16da10b82 Make sure that we always use latest graph as a candidate for active-subvol. Change-Id: Ie37c818366f28ba6b1570d65a9eb17697d38a6c5 BUG: 1448364 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: https://review.gluster.org/17200 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> 
Make sure that we always use latest graph as a candidate for
active-subvol.

Change-Id: Ie37c818366f28ba6b1570d65a9eb17697d38a6c5
BUG: 1448364
Signed-off-by: Raghavendra G <rgowdapp@redhat.com>
Reviewed-on: https://review.gluster.org/17200
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Amar Tumballi <amarts@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
fuse: enhance fusedump to include timestamp and a signature 2017-04-30T08:36:25+00:00 Csaba Henk csaba@redhat.com 2017-01-17T16:23:52+00:00 7a9d6aa5999a71e29c5fa47a0ea7105c6494123a (Also referred to as "fusedump v2".) Change-Id: I837944024efd1b9055c2f5f91bd5723ef350e688 Signed-off-by: Csaba Henk <csaba@redhat.com> Reviewed-on: https://review.gluster.org/16422 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> 
(Also referred to as "fusedump v2".)

Change-Id: I837944024efd1b9055c2f5f91bd5723ef350e688
Signed-off-by: Csaba Henk <csaba@redhat.com>
Reviewed-on: https://review.gluster.org/16422
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Amar Tumballi <amarts@redhat.com>
Tested-by: Raghavendra G <rgowdapp@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
mount/fuse: Replace GF_LOG_OCCASIONALLY with gf_log() to report fop failure at all times 2017-04-30T08:35:47+00:00 Krutika Dhananjay kdhananj@redhat.com 2017-04-20T04:47:07+00:00 ef60a29703f520c5bd06467efc4a0d0a33552a06 Change-Id: Ibd8e1c6172812951092ff6097ba4bed943051b7c BUG: 1440051 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: https://review.gluster.org/17086 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> 
Change-Id: Ibd8e1c6172812951092ff6097ba4bed943051b7c
BUG: 1440051
Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com>
Reviewed-on: https://review.gluster.org/17086
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>