glusterfs.git/xlators/mgmt/glusterd/src/glusterd-store.h, branch round-robin2

glusterd: glusterd must store all rebalance related information

2016-07-04T12:34:57+00:00

Change-Id: I8404b864a405411e3af2fbee46ca20330e656045
BUG: 1351021
Signed-off-by: Sakshi Bansal 
Reviewed-on: http://review.gluster.org/14827
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee

glusterd: persist brickinfo->real_path

2016-04-29T16:17:22+00:00

Since real_path was not persisted and gets constructed at every glusterd
restart, glusterd will fail to come up if one of the brick's underlying file
system is crashed.

Solution is to construct real_path only once and get it persisted.

Change-Id: I97abc30372c1ffbbb2d43b716d7af09172147b47
BUG: 1330481
Signed-off-by: Atin Mukherjee 
Reviewed-on: http://review.gluster.org/14075
CentOS-regression: Gluster Build System 
Smoke: Gluster Build System 
Reviewed-by: Kaushal M 
NetBSD-regression: NetBSD Build System

mgmt/glusterd: Store arbiter-count and restore it

2015-11-04T21:39:32+00:00

Problem:
1) Glusterd doesn't remember about arbiter information of replica volume in
   store.  When glusterd goes down and comes backup, arbiter volumes will
   become replica volumes.

2) Glusterd doesn't import/export arbiter information to/from the other peers.

3) Volume info doesn't show any arbiter count in the output.

Fix:
1) Persist arbiter information in glusterd-store
2) Import/Export arbiter information of the volume
3) Change volume info output to show arbiter count.

Change-Id: I2db81e73d2694b01f7d07b08a17b41ad5a55c361
BUG: 1276675
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/12475
Tested-by: Gluster Build System 
Reviewed-by: Ravishankar N 
Reviewed-by: Jeff Darcy

quota: add version to quota xattrs

2015-11-02T08:54:35+00:00

When a quota is disable and the clean-up process terminated
without completely cleaning-up the quota xattrs.
Now when quota is enabled again, this can mess-up the accounting

A version number is suffixed for all quota xattrs and this version
number is specific to marker xaltor, i.e when quota xattrs are
requested by quotad/client marker will remove the version suffix in the
key before sending the response

Change-Id: I1ca2c11460645edba0f6b68db70d476d8d26e1eb
BUG: 1272411
Signed-off-by: vmallika 
Reviewed-on: http://review.gluster.org/12386
Tested-by: NetBSD Build System 
Reviewed-by: Krishnan Parthasarathi 
Tested-by: Gluster Build System 
Reviewed-by: Manikandan Selvaganesh 
Reviewed-by: Raghavendra G

build: do not #include "config.h" in each file

2015-05-29T12:43:17+00:00

Instead of including config.h in each file, and have the additional
config.h included from the compiler commandline (-include option).

When a .c file tests for a certain #define, and config.h was not
included, incorrect assumtions were made. With this change, it can not
happen again.

BUG: 1222319
Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/10808
Tested-by: Gluster Build System 
Tested-by: NetBSD Build System
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Pranith Kumar Karampuri

quota: quota.conf backward compatibility fix

2015-05-29T01:57:37+00:00

In release-3.7 the format of quota.conf is changed.
There is a backward compatibility issues during upgrade
1) There can be an issue when peer sync between node-3.6 and node-3.7
2) If the user sets/removes limit, there is will different format of
   file in node-3.6 and node-3.7

This patch fixes the issue:
1) restrict the user to execute command quota enable, limit-usage, remove
2) write quota.conf in older format if op-version is less than 3.6

Change-Id: Ib76f5a0a85394642159607a105cacda743e7d26b
BUG: 1223739
Signed-off-by: vmallika 
Reviewed-on: http://review.gluster.org/10889
Tested-by: NetBSD Build System
Reviewed-by: Krishnan Parthasarathi

cli/tiering: volume info should display details about tier

2015-05-10T10:38:39+00:00

>> gluster volume info patchy

Volume Name: patchy
Type: Tier
Volume ID: 8bf1a1ca-6417-484f-821f-18973a7502a8
Status: Created
Number of Bricks: 8
Transport-type: tcp
Hot Tier :
Hot Tier Type : Replicate
Number of Bricks: 1 x 2 = 2
Brick1: hostname:/home/brick30
Brick2: hostname:/home/brick31
Cold Bricks:
Cold Tier Type : Disperse
Number of Bricks: 1 x (4 + 2) = 6
Brick3: hostname:/home/brick20
Brick4: hostname:/home/brick21
Brick5: hostname:/home/brick23
Brick6: hostname:/home/brick24
Brick7: hostname:/home/brick25
Brick8: hostname:/home/brick26

Change-Id: I7b9025af81263ebecd641b4b6897b20db8b67195
BUG: 1212400
Signed-off-by: Mohammed Rafi KC 
Reviewed-on: http://review.gluster.org/10339
Reviewed-by: Krishnan Parthasarathi 
Tested-by: Krishnan Parthasarathi 
Tested-by: Gluster Build System

NFS-Ganesha: Handling CLI commands when NFS-Ganesha keys are set

2015-04-30T10:30:01+00:00

When ganesha.enable is set to on and features.ganesha is
enabled, there are a few behaviour changes that should
be seen in other volume operations.

1. ganesha.enable can be set to 'on' only
when features.ganesha is set to 'enable'

2.When gluster vol is started, and if ganesha.enable
key was set to 'on', it should automatically export the volume
via NFS-Ganesha.

3.When ganesha.enable is set to 'on', and a volume
is stopped, that volume should be unexported via NFS-Ganesha.

4. gluster vol reset 
If ganesha.enable was set to on, then unexport the
volume via NFS-Ganesha.

5. gluster vol reset all
If features.ganesha is set to enable, as part
of reset all, set it to disable. This translates
to teardown cluster.

All the above problems are fixed by checking the global key
and value, depending on the value, specific functions are called.
And also, functions related to global commands
are moved to cli-cmd-global.c

Commit phase of features.ganesha enable/disable
runs the ganesha-ha.sh setup/teardown respectively.
Before the script begins, it is important that the
NFS-Ganesha service starts on all the HA nodes.
Having the start service commands in the
commit phase could lead to problems.
Moving the pre-requisite service start
commands to the 'stage' phase.

Change-Id: I5a256f94f8e1310ddcd5369f329b7168b2a24c47
BUG: 1200265
Signed-off-by: Meghana Madhusudhan 
Reviewed-on: http://review.gluster.org/10283
Reviewed-by: jiffin tony Thottan 
Tested-by: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY

build: make contrib/uuid dependency optional

2015-04-10T11:39:52+00:00

On Linux systems we should use the libuuid from the distribution and not
bundle and statically link the contrib/uuid/ bits.

libglusterfs/src/compat-uuid.h has been introduced and should become an
abstraction layer for different UUID APIs. Non-Linux operating systems
should implement their compatibility layer there.

Once all operating systems have an implementation in compat-uuid.h, we
can remove contrib/uuid/ from the repository completely.

Change-Id: I345e5357644be2521685e00358bb8c83c4ea0577
BUG: 1206587
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/10129
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

glusterd: CLI commands to create and manage tiered volumes.

2015-03-19T13:32:28+00:00

A tiered volume is a normal volume with some number of new bricks
representing "hot" storage. The "hot" bricks can be attached or
detached dynamically to a normal volume. When this happens, a new graph
is constructed. The root of the new graph is an instance of the tier
translator. One subvolume of the tier translator leads to the old volume,
and another leads to the new hot bricks.

attach-tier  [ ]  ... [force]

volume detach-tier  [replica ] 
... 

gluster volume rebalance  tier start

gluster volume rebalance  tier stop

gluster volume rebalance  tier status

The "tier start" CLI command starts a server side daemon. The daemon
initiates file level migration based on caching policies. The daemon's
status can be monitored and stopped.

Note development on the "tier status" command is incomplete. It will be
added in a subsequent patch.

When the "hot" storage is detached, the tier translator is removed
from the graph and the tiered volume reverts to its original state as
described in the volume's info file.

For more background and design see the feature page [1].

[1]
http://www.gluster.org/community/documentation/index.php/Features/data-classification

Change-Id: Ic8042ce37327b850b9e199236e5be3dae95d2472
BUG: 1194753
Signed-off-by: Dan Lambright 
Reviewed-on: http://review.gluster.org/9753
Reviewed-by: Vijay Bellur 
Tested-by: Vijay Bellur