glusterfs.git/xlators/mgmt/glusterd/src/glusterd-replace-brick.c, branch v3.8.12

glusterd: copy real_path from older brickinfo during brick import

2016-05-20T09:33:10+00:00

Backport of http://review.gluster.org/14306

In glusterd_import_new_brick () new_brickinfo->real_path will not be populated
for the first time and hence if the underlying file system is bad for the same
brick, import will fail resulting in inconsistent configuration data.

Fix is to populate real_path from old brickinfo object.

Also there were many cases where we were unnecessarily calling realpath() and
that may cause in failure. For eg - if a remove brick is executed with a brick
whoose underlying file system has crashed, remove-brick fails since realpath()
call fails. We'd need to call realpath() here as the value is of no use.Hence
passing construct_realpath as _gf_false in glusterd_volume_brickinfo_get_by_brick ()
is a must in such cases.

Change-Id: I7ec93871dc9e616f5d565ad5e540b2f1cacaf9dc
BUG: 1337114
Signed-off-by: Atin Mukherjee 
Reviewed-on: http://review.gluster.org/14306
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Kaushal M 
Reviewed-on: http://review.gluster.org/14411

glusterd: populate brickinfo->real_path conditionally

2016-04-11T18:39:16+00:00

glusterd_brickinfo_new_from_brick () is called from multiple places and one of
them is glusterd_brick_rpc_notify where its very well possible that an
underlying brick's file system has crashed and a disconnect event has been
received. In this case glusterd tries to build the brickinfo from the brickid in
the RPC request, however the same fails as glusterd_brickinfo_new_from_brick ()
fails from realpath.

Fix is to skip populating real_path if its a disconnect event.

Change-Id: I9d9149c64a9cf2247abb731f219c1b1eef037960
BUG: 1325841
Signed-off-by: Atin Mukherjee 
Reviewed-on: http://review.gluster.org/13965
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Jeff Darcy

glusterd / afr : Enable auto heal when replica count increases

2016-03-21T17:51:00+00:00

In replicate volumes, when a brick is added to a replicate
group, heal to the new brick should be triggered.
Also, the new brick should not be considered as source for
healing till it is up to date.

Previously, extended attributes had to be set manually on
the bricks for this to happen. This patch is part 1 patch
to automate this process.

Change-Id: I29958448618372bfde23bf1dac5dd23dba1ad98f
BUG: 1276203
Signed-off-by: Anuradha Talur 
Reviewed-on: http://review.gluster.org/12451
Reviewed-by: Atin Mukherjee 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Ravishankar N 
Smoke: Gluster Build System

glusterd: Bug fixes for IPv6 support

2016-02-20T17:16:42+00:00

Problem:
Glusterd not working using ipv6 transport. The idea is with proper glusterd.vol configuration,
1. glusterd needs to listen on default port (240007) as IPv6 TCP listner.
2. Volume creation/deletion/mounting/add-bricks/delete-bricks/peer-probe
   needs to work using ipv6 addresses.
3. Bricks needs to listen on ipv6 addresses.
All the above functionality is needed to say that glusterd supports ipv6 transport and this is broken.

Fix:
When "option transport.address-family inet6" option is present in glusterd.vol
file, it is made sure that glusterd creates listeners using ipv6 sockets only and also the same information is saved
inside brick volume files used by glusterfsd brick process when they are starting.

Tests Run:
Regression tests using ./run-tests.sh
    IPv4: Ran manually till tests/basic/rpm.t .
    IPv6: (Need to add the above mentioned config and also add an entry for "hostname ::1" in /etc/hosts)
        Started failing at ./tests/basic/glusterd/arbiter-volume-probe.t and ran successfully till here

Unit Tests using Ipv6
    peer probe
    add-bricks
    remove-bricks
    create volume
    replace-bricks
    start volume
    stop volume
    delete volume

Change-Id: Iebc96e6cce748b5924ce5da17b0114600ec70a6e
BUG: 1117886
Signed-off-by: Nithin D 
Reviewed-on: http://review.gluster.org/11988
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee 
Reviewed-by: Jeff Darcy

cluster/ec: Mark self-heal fops as internal

2015-11-18T13:16:03+00:00

Change-Id: I8ae7af266d3e00460f0cfdc9389a926e5f2fee36
BUG: 1282761
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/12598
Tested-by: Gluster Build System 
Tested-by: NetBSD Build System 
Reviewed-by: Xavier Hernandez

glusterd : vol replace-brick fails when transport.socket.bind-address is set in glusterd

2015-11-03T08:37:09+00:00

Change-Id: Id8c29aa46b526bc003a1d7023714b67805e35a99
BUG: 1276386
Signed-off-by: Mohamed Ashiq Liyazudeen 
Signed-off-by: Humble Devassy Chirammal 
Reviewed-on: http://review.gluster.org/12461
Tested-by: NetBSD Build System 
Tested-by: Gluster Build System 
Reviewed-by: Atin Mukherjee

dict: dict_set_bin() should never free the pointer on error

2015-07-24T15:09:08+00:00

dict_set_bin() is handling the pointer that it passed inconsistently.
Depending on the errors that can occur, the pointer passed to the dict
can be free'd, but there is no guarantee.

It is cleaner to have the caller free the pointer that allocated it and
dict_set_bin() returned an error. When dict_set_bin() returned success,
the given pointer will be free'd when dict_unref() calls data_destroy().

Many callers of dict_set_bin() already take care of free'ing the pointer
on error. The ones that did not, are corrected with this change too.

Change-Id: I39a4f7ebc0cae6d403baba99307d7ce408f25966
BUG: 1242280
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/11638
Tested-by: Gluster Build System 
Reviewed-by: jiffin tony Thottan 
Reviewed-by: Raghavendra G 
Tested-by: NetBSD Build System

glusterd: Porting the left out gf_log_callingfns to new framework

2015-07-18T12:08:04+00:00

Change-Id: I1b0ad54238895475ddbacc4fffacac8dc6e887fe
BUG: 1235538
Signed-off-by: Nandaja Varma 
Reviewed-on: http://review.gluster.org/11590
Tested-by: Gluster Build System 
Tested-by: NetBSD Build System 
Reviewed-by: Atin Mukherjee

glusterd: Fix failure in replace-brick when src-brick is offline

2015-07-14T01:01:19+00:00

Change-Id: I0fdb58e15da15c40c3fc9767f2fe4df0ea9d2350
BUG: 1242609
Signed-off-by: Anuradha Talur 
Reviewed-on: http://review.gluster.org/11651
Tested-by: NetBSD Build System 
Tested-by: Gluster Build System 
Reviewed-by: Krishnan Parthasarathi

glusterd: Porting left out log messages to new framework

2015-06-27T06:32:01+00:00

Change-Id: I70d40ae3b5f49a21e1b93f82885cd58fa2723647
BUG: 1235538
Signed-off-by: Nandaja Varma 
Reviewed-on: http://review.gluster.org/11388
Tested-by: NetBSD Build System 
Reviewed-by: Anand Nekkunti 
Tested-by: Gluster Build System 
Reviewed-by: Kaushal M