glusterfs.git/xlators/features, branch v5.0alpha

build: cleanup xlator link, --no-undefined, libuuid

2018-09-12T14:38:13+00:00

While attempting to build a (pre-)5.0 of glusterfs on Ubuntu
bionic and cosmic, it became apparent that there are some gremlins
hiding in the combination of the xlator export-symbols, the newish
addition of -Wl,--no-undefined, and the new switch to libuuid from
the old contrib/uuid.

Note: even though Fedora 28 (and later) and Ubuntu bionic (and
later) have the same nominal version of libtool, the Fedora version
appears to do a better job of recursing through dependencies to
determine the libraries to link with.

Examination of the build logs showed that despite appearing to work
on Fedora, not all xlators and shared libs were linked with -Wl,
--no-undefined, and -luuid. And in the case of the gnfs xlator, it
was not only not linked with -Wl,--no-undefined but alsos not linked
with -lgfxdr and -lgfrpc.

Added GF_XLATOR_LDFLAGS, similar to GF_XLATOR_DEFAULT_LDFLAGS.
GF_XLATOR_DEFAULT_LDFLAGS is for xlators that export/expose the
default or common set of symbols. GF_XLATOR_LDFLAGS is for those
remaining xlators that export/expose non-default symbols, e.g. dht
and glupy. This removes the need in the future to add things like
$(UUID_LIBS) to every xlator's Makefile.am. Just add it to
GF_XLATOR_LDFLAGS and GF_XLATOR_DEFAULT_LDFLAGS in configure.ac
and you're done.

This patch was tested on Fedora 28 (build, rpmbuild), Fedora
Rawhide/30 (rpmbuild), RHEL8 (rpmbuild), CentOS7 (rpmbuild), Fedora
koji --scratch build for f30/rawhide, and a Launchpad build for
Ubuntu cosmic/18.10.

Change-Id: Ieca104fa5c5d3c094e701c8ca4a73754dd0292b0
updates: bz#1193929
Signed-off-by: Kaleb S. KEITHLEY

Land part 2 of clang-format changes

2018-09-12T12:22:45+00:00

Change-Id: Ia84cc24c8924e6d22d02ac15f611c10e26db99b4
Signed-off-by: Nigel Babu

Land clang-format changes

2018-09-12T11:52:48+00:00

Change-Id: I6f5d8140a06f3c1b2d196849299f8d483028d33b

misc: fix misc. shebangs

2018-09-11T04:25:17+00:00

* One #!/usr/bin/env python and three #!/usr/bin/python were overlooked
  in all the other python fixups. Ugh.

* Two new python files missed the memo about #!/usr/bin/python3.

* One #!/usr/bin/env bash.
  Various distribution packaging policies have strong wording about
  the use of #!/usr/bin/env ...

  Note: this patch does not change the use of #!/usr/bin/env bash in
  the two files extras/{clang-checker.sh,check_goto.pl} as these are
  not included in any packages. (Although I'm not actually sure why
  anyone would ever use '/usr/bin/env {sh,bash}' as I'm not aware of
  any version-specific differences like there are with, e.g., python.)

* One #!/usr/bin/bash.
  On Fedora and CentOS > 6, /bin is a symlink to /usr/bin, so it
  makes little difference. But Debian & Ubuntu still have separate
  /bin and /usr/bin; and sh and bash are in /bin, not /usr/bin.
  (Historically, in BSD and SYSV Unix it was /bin/sh.)

  Note: Fedora and CentOS package build runs a script that converts
  all /bin/sh and /bin/bash to /usr/bin/sh and /usr/bin/bash.

Change-Id: I9171265829af78dd0cd7622c22b56d22179ff8a3
updates: bz#1193929
Signed-off-by: Kaleb S. KEITHLEY

features/snapview-server: remove the ret variable

2018-09-11T01:35:23+00:00

Used only once to store the return value of a function.

Change-Id: Ib2b9db847b5f652ce46f220297d9c7c3503eaea2
fixes: #230
Signed-off-by: Raghavendra Bhat

Quota: Fix for clang issues

2018-09-07T03:42:18+00:00

Updates: bz#1193929
Change-Id: I549f741fbf97ee3fa2d63edacee5b705ef37c49a
Signed-off-by: sanoj-unnikrishnan

features/uss: Use xxh64 to generate gfid instead of md5sum

2018-09-05T13:13:21+00:00

* This is to ensure FIPS support
* Also changed the signature of svs_uuid_generate to
  get xlator argument
* Added xxh64 wrapper functions in common-utils to
  generate gfid using xxh64
  - Those wrapper functions can be used by other xlators
    as well to generate gfids using xxh64. But as of now
    snapview-server is going to be the only consumer.

Change-Id: Ide66573125dd74122430cccc4c4dc2a376d642a2
Updates: #230
Signed-off-by: Raghavendra Manjunath 
Signed-off-by: Raghavendra Bhat

xlators: add classification flag to some

2018-09-04T09:16:36+00:00

Add classification to those translators which has `xlator_api_t`
already defined and used.

Updates: #430
Change-Id: I9d2772cb2c4ed4ab06aaa546500cf3b7d00bddac
Signed-off-by: Amar Tumballi

Multiple files: calloc -> malloc

2018-09-04T04:58:14+00:00

xlators/storage/posix/src/posix-inode-fd-ops.c:
xlators/storage/posix/src/posix-helpers.c:
xlators/storage/bd/src/bd.c:
xlators/protocol/client/src/client-lk.c:
xlators/performance/quick-read/src/quick-read.c:
xlators/performance/io-cache/src/page.c
xlators/nfs/server/src/nfs3-helpers.c
xlators/nfs/server/src/nfs-fops.c
xlators/nfs/server/src/mount3udp_svc.c
xlators/nfs/server/src/mount3.c
xlators/mount/fuse/src/fuse-helpers.c
xlators/mount/fuse/src/fuse-bridge.c
xlators/mgmt/glusterd/src/glusterd-utils.c
xlators/mgmt/glusterd/src/glusterd-syncop.h
xlators/mgmt/glusterd/src/glusterd-snapshot.c
xlators/mgmt/glusterd/src/glusterd-rpc-ops.c
xlators/mgmt/glusterd/src/glusterd-replace-brick.c
xlators/mgmt/glusterd/src/glusterd-op-sm.c
xlators/mgmt/glusterd/src/glusterd-mgmt.c
xlators/meta/src/subvolumes-dir.c
xlators/meta/src/graph-dir.c
xlators/features/trash/src/trash.c
xlators/features/shard/src/shard.h
xlators/features/shard/src/shard.c
xlators/features/marker/src/marker-quota.c
xlators/features/locks/src/common.c
xlators/features/leases/src/leases-internal.c
xlators/features/gfid-access/src/gfid-access.c
xlators/features/cloudsync/src/cloudsync-plugins/src/cloudsyncs3/src/libcloudsyncs3.c
xlators/features/bit-rot/src/bitd/bit-rot.c
xlators/features/bit-rot/src/bitd/bit-rot-scrub.c
bxlators/encryption/crypt/src/metadata.c
xlators/encryption/crypt/src/crypt.c
xlators/performance/md-cache/src/md-cache.c:

Move to GF_MALLOC() instead of GF_CALLOC() when possible

It doesn't make sense to calloc (allocate and clear) memory
when the code right away fills that memory with data.
It may be optimized by the compiler, or have a microscopic
performance improvement.

In some cases, also changed allocation size to be sizeof some
struct or type instead of a pointer - easier to read.
In some cases, removed redundant strlen() calls by saving the result
into a variable.

1. Only done for the straightforward cases. There's room for improvement.
2. Please review carefully, especially for string allocation, with the
terminating NULL string.

Only compile-tested!

.. and allocate memory as much as needed.

xlators/nfs/server/src/mount3.c :

Don't blindly allocate PATH_MAX, but strlen() the string and allocate
appropriately.
Also, align error messges.

updates: bz#1193929
Original-Author: Yaniv Kaul 
Signed-off-by: Yaniv Kaul 
Signed-off-by: Yaniv Kaul 
Change-Id: Ibda6f33dd180b7f7694f20a12af1e9576fe197f5

core: python3

2018-09-03T09:14:44+00:00

see https://review.gluster.org/#/c/19788/,
    https://review.gluster.org/#/c/19871/,
    https://review.gluster.org/#/c/19952/,
    https://review.gluster.org/#/c/20104/,
    https://review.gluster.org/#/c/20162/,
    https://review.gluster.org/#/c/20185/,
    https://review.gluster.org/#/c/20207/,
    https://review.gluster.org/#/c/20227/,
    https://review.gluster.org/#/c/20307/,
    https://review.gluster.org/#/c/20320/,
    https://review.gluster.org/#/c/20332/,
    https://review.gluster.org/#/c/20364/,
    https://review.gluster.org/#/c/20441/, and
    https://review.gluster.org/#/c/20484

shebangs changed from /usr/bin/python2 to /usr/bin/python3.
(Reminder, various distribution packaging guidelines require use
of explicit python version and don't allow '#!/usr/bin/env python',
regardless of how handy that idiom may be.)

glusterfs.spec(.in) package python{2,3}-gluster and python2 or
python3 dependencies as appropriate.

configure(.ac):
+ test for and use python2 or python3 as appropriate. If build
  machine has python2 and python3, use python3. Override by
  setting PYTHON=/usr/bin/python2 when running configure.
+ PYTHONDEV_CPPFLAGS from python[23]-config --includes is a
  better match to the original python sysconfig.get_python_inc().
  All those other extraneous flags breaks the build.
+ Only change the shebangs once. Changing them over and over
  again, e.g., during a `make glusterrpms` in extras/LinuxRPM
  just sends make (is it really make that's looping?) into an
  infinite loop. If you figure out why, let me know.
+ Oldest python2 is python2.6 on CentOS 6 and Debian 8 (Jessie).
  Everything else has 2.7 or 3.x
+ logic from https://review.gluster.org/c/glusterfs/+/21050, which
  needs to be removed/merged after that patch is merged.

Builds on CentOS 6, CentOS 7, Fedora 28, Fedora rawhide, and the
mysterious RHEL > 7.

Change-Id: Idae21d3b6f58b32372e1daa0d234e491e563198f
updates: #411
Signed-off-by: Kaleb S. KEITHLEY