glusterfs.git/xlators/features/locks/src/common.h, branch v3.12.9

features/locks: Add lock revocation functionality to posix locks translator

2016-07-18T09:30:38+00:00

Summary:
- Motivation: Prevents cluster instability by mis-behaving clients
causing bricks to OOM due to inode/entry lock pile-ups.
- Adds option to strip clients of entry/inode locks after N seconds
- Adds option to clear ALL locks should the revocation threshold get hit
- Adds option to clear all or granted locks should the max-blocked
threshold get hit (can be used in combination w/ revocation-clear-all).
- Options are:
features.locks-revocation-secs
features.locks-revocation-clear-all [on/off]
features.locks-revocation-max-blocked
- Adds monkey-locking option to ignore 1% of unlock requests (dev only)
features.locks-monkey-unlocking [on/off]
- Adds logging to indicate revocation event & reason

Test Plan:
First you will need TWO fuse mounts for this repro. Call them /mnt/patchy1 & /mnt/patchy2.

1. Enable monkey unlocking on the volume:
gluster vol set patchy features.locks-monkey-unlocking on

2. From the "patchy1", use DD or some other utility to begin writing to a file,
eventually the dd will hang due to the dropped unlocked requests. This now
simulates the broken client. Run:

for i in {1..1000};do dd if=/dev/zero of=/mnt/patchy1/testfile bs=1k count=10;done'

...this will eventually hang as the unlock request has been lost.

3. Goto another window and setup the mount "patchy2" @ /mnt/patchy2, and
observe that 'echo "hello" >> /mnt/patchy2/testfile" will hang due to the
inability of the client to take out the required lock.

4. Next, re-start the test this time enabling lock revocation; use a timeout of
2-5 seconds for testing:
'gluster vol set patchy features.locks-revocation-secs <2-5>'

5. Wait 2-5 seconds before executing step 3 above this time. Observe that this
time the access to the file will succeed, and the writes on patchy1 will
unblock until they hit another failed unlock request due to
"monkey-unlocking".

BUG: 1350867
Change-Id: I814b9f635fec53834a26db634d1300d9a61057d8
Signed-off-by: Pranith Kumar K
Reviewed-on: http://review.gluster.org/14816
NetBSD-regression: NetBSD Build System
Reviewed-by: Krutika Dhananjay
CentOS-regression: Gluster Build System
Smoke: Gluster Build System

posix/lock: implement meta-lock/unlock functionality

2016-06-03T10:06:31+00:00

problem : The lock state needs to be protected when rebalance is reading the
lock state on the source. Otherwise there will be locks left unmigrated.
Hence, to synchronize incoming lock requests with lock-migration, meta lock
is needed. Any new lock request will be queued if there is an active meta-lock
and with sucessful lock migration, will be unwound with EREMOTE, so that
dht module can wind the request to the correct destination.

On a successful lock migration, "pl_inode->migrated" flag is enabled. Hence,
any further request would be unwound with EREMOTE and will be redirected to
new destination.

More details can be found here:
https://github.com/gluster/glusterfs-specs/blob/master/accepted/Lock-Migration.md

design discussion:
https://www.gluster.org/pipermail/gluster-devel/2016-January/048088.html

Change-Id: Ief033d5652b5ca4ba6f499110a521cae283d6aba
BUG: 1331720
Signed-off-by: Susant Palai 
Reviewed-on: http://review.gluster.org/14251
Tested-by: Prasanna Kumar Kalever 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra G

features/locks: Implement mandatory locks

2016-05-02T11:18:44+00:00

Initial change to fix/enable the mandatory locking support in GlusterFS
as per the following design:

https://review.gluster.org/#/c/12014/

Accordingly 'locks.mandatory-locking' option is available as part of this
change which will accept one among the following values:

* off
* file
* forced
* optimal

See design doc for more details

Change-Id: I14c489b3f8af5ebcbfa155a03f0c175e9558ac46
BUG: 762184
Signed-off-by: Anoop C S 
Reviewed-on: http://review.gluster.org/9768
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Poornima G 
Reviewed-by: Raghavendra Talur 
Reviewed-by: Rajesh Joseph 
Reviewed-by: Pranith Kumar Karampuri

cluster/ec: Rebalance hangs during rename

2016-03-30T08:51:11+00:00

Problem:
During the rename of a particular file (ec
is holding blocking inodelk on the parent
directory), if the rename of another file
under the same directory comes. EC does not
release the lock and goes ahead and renames
the "new" file with the "already held lock".

That causes rebalance process to be blocked
on a lock which has been acquired by rename.

Solution:
While rename fop comes, ec takes blocking inodelk
on old and new parent of the file. Before releasing,
every lock held by ec, it waits for some "time" to
see if that lock can be reused by the next fop.
If within this "time" some other request comes,
it releases this lock based on condition
"lock count > 1"

To get this "lock count" for rename fop, we have
implemented "pl_rename" in feature/lock. Also,
on ec side, changed the condition to release the lock
based on the type of fop and old and new parent
directories.

Change-Id: I979dbab1185df962e8f305a6074ae1186ffe7db0
Bug: 1304988
Signed-off-by: Ashish Pandey 
Reviewed-on: http://review.gluster.org/13460
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri 
Reviewed-by: Krutika Dhananjay

features/locks: Remove unneeded function parameter

2016-03-22T19:38:00+00:00

We use list_del_init() inside __delete_lock()
to remove a lock from inode's lock list where
pl_inode_t is not required at all. This patch
removes pl_inode_t from list of parameters
required for __delete_lock().

Change-Id: Ic5701bcae231172d4fd7feda1b25752343ee81cf
BUG: 1293227
Signed-off-by: Anoop C S 
Reviewed-on: http://review.gluster.org/13033
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Jeff Darcy

locks: various fixes

2014-01-14T05:44:19+00:00

- implement ref/unref of entry locks (and fix bad pointer deref crashes)
- code cleanup and deleted various data types
- fix improper read/write lock conflict detection in entrylk
- fix indefinite hang of blocked locks on disconnect
- register locks in client_t synchronously, fix crashes in disconnect path

Change-Id: Id273690c9111b8052139d1847060d1fb5a711924
BUG: 849630
Signed-off-by: Anand Avati 
Reviewed-on: http://review.gluster.org/6638
Tested-by: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Vijay Bellur

client_t: phase 2, refactor server_ctx and locks_ctx out

2013-10-31T16:32:50+00:00

remove server_ctx and locks_ctx from client_ctx directly and store as
into discrete entities in the scratch_ctx

hooking up dump will be in phase 3

BUG: 849630
Change-Id: I94cea328326db236cdfdf306cb381e4d58f58d4c
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/5678
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

features/locks : Improves debuggability of inode/entry locks.

2013-09-03T13:50:40+00:00

Prints, in the statedump, the information about the mount that
performed the inode/entry lk.

For the entrylks that are granted after a blocked state, the
blocked time is not printed. A patch for that will be sent
later.

Change-Id: Ib0c1ed21fa9328b435f96b590dd343f59814a08d
BUG: 915629
Signed-off-by: Anuradha Talur 
Reviewed-on: http://review.gluster.org/5712
Reviewed-by: Pranith Kumar Karampuri 
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

locks: Added an xdata-based 'cmd' for inodelk count in a given domain

2013-07-18T08:38:16+00:00

Following is the semantics of the 'cmd':
1) If @domain is NULL - returns no. of locks blocked/granted in all domains
2) If @domain is non-NULL- returns no. of locks blocked/granted in that
domain
3) If @domain is non-existent - returns '0'; This is important since
locks xlator creates a domain in a lazy manner.

where @domain - a string representing the domain.

Change-Id: I5e609772343acc157ca650300618c1161efbe72d
BUG: 951195
Original-author: Krishnan Parthasarathi 
Signed-off-by: Krishnan Parthasarathi 
Signed-off-by: shishir gowda 
Reviewed-on: http://review.gluster.org/4889
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi

All: License message change

2012-09-13T20:19:37+00:00

License message changed for server-side, dual license GPLV2 and LGPLv3+.

Change-Id: Ia9e53061b9d2df3b3ef3bc9778dceff77db46a09
BUG: 852318
Signed-off-by: Varun Shastry 
Reviewed-on: http://review.gluster.org/3940
Tested-by: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Anand Avati