glusterfs.git/xlators/features/changelog/src, branch v4.0dev

libglusterfs: Name threads on creation

2017-07-19T14:16:19+00:00

Set names to threads on creation for easier
debugging.

Output of top -H -p 
Before:
19773 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19774 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19775 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19776 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19777 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19778 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19779 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19780 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19781 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19782 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19783 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19784 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19785 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.01 glusterfsd
19786 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.01 glusterfsd
19787 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.01 glusterfsd
19789 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19790 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
25178 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
 5398 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
 7881 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd

After:
19773 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19774 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glustertimer
19775 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19776 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glustermemsweep
19777 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glustersproc0
19778 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glustersproc1
19779 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterepoll0
19780 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusteridxwrker
19781 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusteriotwr0
19782 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterbrssign
19783 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterbrswrker
19784 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterclogecon
19785 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.01 glusterclogd0
19786 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.01 glusterclogd1
19787 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.01 glusterclogd2
19789 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterposixjan
19790 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterposixfsy
25178 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterepoll1
 5398 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterepoll2
 7881 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterposixhc

Change-Id: Id5f333755c1ba168a2ffaa4fce6e71c375e10703
BUG: 1254002
Updates: #271
Signed-off-by: Raghavendra Talur 
Reviewed-on: https://review.gluster.org/11926
Reviewed-by: Prashanth Pai 
Smoke: Gluster Build System 
Reviewed-by: Niels de Vos 
CentOS-regression: Gluster Build System

feature/changelog: Fix buffer overflow crash

2017-06-21T10:06:59+00:00

The buffer used to hold the basename  was hard coded
to the size of NAME_MAX(255). It might lead to buffer
overflow crashes when the basename which is sent
is more than NAME_MAX length. Fixed the same.

Change-Id: I6c1cad3ccaeb8c55549b1d3c5f96a198f65ba2b7
BUG: 1463178
Signed-off-by: Kotresh HR 
Reviewed-on: https://review.gluster.org/17579
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
Reviewed-by: jiffin tony Thottan

glusterfs: Not able to mount running volume after enable brick mux and stopped any volume

2017-05-31T20:43:53+00:00

Problem: After enabled brick mux if any volume has down and then try ot run mount
         with running volume , mount command is hung.

Solution: After enable brick mux server has shared one data structure server_conf
          for all associated subvolumes.After down any subvolume in some
          ungraceful manner (remove brick directory) posix xlator sends
          GF_EVENT_CHILD_DOWN event to parent xlatros and server notify
          updates the child_up to false in server_conf.When client is trying
          to communicate with server through mount it checks conf->child_up
          and it is FALSE so it throws message "translator are not yet ready".
          From this patch updated structure server_conf to save child_up status
          for xlator wise. Another improtant correction from this patch is
          cleanup threads from server side xlators after stop the volume.

BUG: 1453977
Change-Id: Ic54da3f01881b7c9429ce92cc569236eb1d43e0d
Signed-off-by: Mohit Agrawal 
Reviewed-on: https://review.gluster.org/17356
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Raghavendra Talur 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

features/changelog: Add xattr as special type in changelog entry

2017-05-10T12:55:46+00:00

When both SETATTR and SETXATTR fops are happening on gfid within the
rollover time then, SETXATTR were not logged.
In Which case we will miss the xattr fop in slave.

This patch will be fix the same

Change-Id: Ia75538ad1fd2797dbcf90d20dfa89f756009243d
BUG: 1448914
Signed-off-by: Mohammed Rafi KC 
Reviewed-on: https://review.gluster.org/17205
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Kotresh HR 
Smoke: Gluster Build System

Halo Replication feature for AFR translator

2017-05-02T10:23:53+00:00

Summary:
Halo Geo-replication is a feature which allows Gluster or NFS clients to write
locally to their region (as defined by a latency "halo" or threshold if you
like), and have their writes asynchronously propagate from their origin to the
rest of the cluster.  Clients can also write synchronously to the cluster
simply by specifying a halo-latency which is very large (e.g. 10seconds) which
will include all bricks.

In other words, it allows clients to decide at mount time if they desire
synchronous or asynchronous IO into a cluster and the cluster can support both
of these modes to any number of clients simultaneously.

There are a few new volume options due to this feature:
  halo-shd-latency:  The threshold below which self-heal daemons will
  consider children (bricks) connected.

  halo-nfsd-latency: The threshold below which NFS daemons will consider
  children (bricks) connected.

  halo-latency: The threshold below which all other clients will
  consider children (bricks) connected.

  halo-min-replicas: The minimum number of replicas which are to
  be enforced regardless of latency specified in the above 3 options.
  If the number of children falls below this threshold the next
  best (chosen by latency) shall be swapped in.

New FUSE mount options:
  halo-latency & halo-min-replicas: As descripted above.

This feature combined with multi-threaded SHD support (D1271745) results in
some pretty cool geo-replication possibilities.

Operational Notes:
- Global consistency is gaurenteed for synchronous clients, this is provided by
  the existing entry-locking mechanism.
- Asynchronous clients on the other hand and merely consistent to their region.
  Writes & deletes will be protected via entry-locks as usual preventing
  concurrent writes into files which are undergoing replication.  Read operations
  on the other hand should never block.
- Writes are allowed from _any_ region and propagated from the origin to all
  other regions.  The take away from this is care should be taken to ensure
  multiple writers do not write the same files resulting in a gfid split-brain
  which will require resolution via split-brain policies (majority, mtime &
  size).  Recommended method for preventing this is using the nfs-auth feature to
  define which region for each share has RW permissions, tiers not in the origin
  region should have RO perms.

TODO:
- Synchronous clients (including the SHD) should choose clients from their own
  region as preferred sources for reads.  Most of the plumbing is in place for
  this via the child_latency array.
- Better GFID split brain handling & better dent type split brain handling
  (i.e. create a trash can and move the offending files into it).
- Tagging in addition to latency as a means of defining which children you wish
  to synchronously write to

Test Plan:
- The usual suspects, clang, gcc w/ address sanitizer & valgrind
- Prove tests

Reviewers: jackl, dph, cjh, meyering

Reviewed By: meyering

Subscribers: ethanr

Differential Revision: https://phabricator.fb.com/D1272053

Tasks: 4117827

Change-Id: I694a9ab429722da538da171ec528406e77b5e6d1
BUG: 1428061
Signed-off-by: Kevin Vigor 
Reviewed-on: http://review.gluster.org/16099
Reviewed-on: https://review.gluster.org/16177
Tested-by: Pranith Kumar Karampuri 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri

core: run many bricks within one glusterfsd process

2017-01-31T00:13:58+00:00

This patch adds support for multiple brick translator stacks running
in a single brick server process.  This reduces our per-brick memory usage by
approximately 3x, and our appetite for TCP ports even more.  It also creates
potential to avoid process/thread thrashing, and to improve QoS by scheduling
more carefully across the bricks, but realizing that potential will require
further work.

Multiplexing is controlled by the "cluster.brick-multiplex" global option.  By
default it's off, and bricks are started in separate processes as before.  If
multiplexing is enabled, then *compatible* bricks (mostly those with the same
transport options) will be started in the same process.

Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb
BUG: 1385758
Signed-off-by: Jeff Darcy 
Reviewed-on: https://review.gluster.org/14763
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Vijay Bellur

features/changelog: fix a bug in changelog_rpc_server_destroy

2017-01-30T20:18:18+00:00

the programe unregister loop never get moved forward, it's a dead loop.
to resolve it, add progs++ in the loop.

Change-Id: Ib25ded10b3ce808e2fb57b13d767833f24cf01a7
BUG: 1369393
Signed-off-by: Ryan Ding 
Reviewed-on: https://review.gluster.org/15292
Smoke: Gluster Build System 
Reviewed-by: Prashanth Pai 
Tested-by: Kotresh HR 
Reviewed-by: Kotresh HR 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Jeff Darcy

gluster: Typos in logs and comments

2017-01-19T20:37:08+00:00

Replaced 'recieve' with 'receive'.

Change-Id: I4c1c9147db5437feb81e4c83ed074440aaa28e07
BUG: 1414645
Signed-off-by: N Balachandran 
Reviewed-on: http://review.gluster.org/16429
Smoke: Gluster Build System 
Reviewed-by: Manikandan Selvaganesh 
Tested-by: Manikandan Selvaganesh 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

features/changelog: Fix htime xattr during brick crash

2017-01-19T09:39:42+00:00

The htime file contains the path of all the changelogs
that is rolloved over till now. It also maintains xattr
which tracks the latest changelog file rolloved over
and the number of changelogs. The path and and xattr
update happens in two different system calls. If the
brick is crashed between them, the xattr value becomes
stale and can lead to the failure of gf_history_changelog.
To identify this, the total number of changelogs is being
calculated based on htime file size and the record
length. The above value is used in case of mismatch.

Change-Id: Ia1c3efcfda7b74227805bb2eb933c9bd4305000b
BUG: 1413967
Signed-off-by: Kotresh HR 
Reviewed-on: http://review.gluster.org/16420
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Aravinda VK

build: out-of-tree builds generates files in the wrong directory

2016-09-18T16:34:37+00:00

And minor cleanup of a few of the Makefile.am files while we're
at it.

Rewrite the make rules to do what xdrgen does. Now we can get rid
of xdrgen.

Note 1. netbsd6's sed doesn't do -i. Why are we still running
smoke tests on netbsd6 and not netbsd7? We barely support netbsd7
as it is.

Note 2. Why is/was libgfxdr.so (.../rpc/xdr/src/...) linked with
libglusterfs? A cut-and-paste mistake? It has no references to
symbols in libglusterfs.

Note3. "/#ifndef\|#define\|#endif/" (note the '\'s) is a _basic_
regex that matches the same lines as the _extended_ regex
"/#(ifndef|define|endif)/". To match the extended regex sed needs to
be run with -r on Linux; with -E on *BSD. However NetBSD's and
FreeBSD's sed helpfully also provide -r for compatibility. Using a
basic regex avoids having to use a kludge in order to run sed with
the correct option on OS X.

Note 4. Not copying the bit of xdrgen that inserts copyright/license
boilerplate. AFAIK it's silly to pretend that machine generated
files like these can be copyrighted or need license boilerplate.
The XDR source files have their own copyright and license; and
their copyrights are bound to be more up to date than old
boilerplate inserted by a script. From what I've seen of other
Open Source projects -- e.g. gcc and its C parser files generated
by yacc and lex -- IIRC they don't bother to add copyright/license
boilerplate to their generated files.

It appears that it's a long-standing feature of make (SysV, BSD,
gnu) for out-of-tree builds to helpfully pretend that the source
files it can find in the VPATH "exist" as if they are in the $cwd.
rpcgen doesn't work well in this situation and generates files
with "bad" #include directives.

E.g. if you `rpcgen ../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.x`,
you get an #include directive in the generated .c file like this:

  ...
  #include "../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.h"
  ...

which (obviously) results in compile errors on out-of-tree build
because the (generated) header file doesn't exist at that location.
Compared to `rpcgen ./glusterfs3-xdr.x` where you get:

  ...
  #include "glusterfs3-xdr.h"
  ...

Which is what we need. We have to resort to some Stupid Make Tricks
like the addition of various .PHONY targets to work around the VPATH
"help".

Warning: When doing an in-tree build, -I$(top_builddir)/rpc/xdr/...
looks exactly like -I$(top_srcdir)/rpc/xdr/...  Don't be fooled though.
And don't delete the -I$(top_builddir)/rpc/xdr/... bits

Change-Id: Iba6ab96b2d0a17c5a7e9f92233993b318858b62e
BUG: 1330604
Signed-off-by: Kaleb S KEITHLEY 
Reviewed-on: http://review.gluster.org/14085
Tested-by: Niels de Vos 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Niels de Vos