glusterfs.git/xlators/features/bit-rot/src, branch v5.7

features/bitrot: compare the signature with proper length

2018-12-12T12:59:18+00:00

* The scrubber was comparing the checksum of the file that it
  calculated (by reading the file) with the on disk signature
  (stored via xattr) wrongly. It was using strlen to calculate
  the signature, while the actual length of the signature is
  given by the brick. Just use the actual length that the brick
  provides instead of trying to calculate the signature length via
  strlen API.

* In posix, gfid2path was using the same string that contains the
  list of all the xattrs of file to save the value of the gfid2path
  xattr as well. This causes confusion when gfid2path xattr is queried
  by scrubber for getting the actual path of a corrupted file. Use
  separate string to fetch the value of the xattr instead of the string
  that contains the list of xattrs.

Backport of:
 > Patch: https://review.gluster.org/21752/
 > BUG: 1654805
 > Change-Id: I2d664ab524d2b312233476cb35863dde3122e9a9
(cherry picked from commit f77fb6d568616592ab25501c402c140d15235ca9)
 
Change-Id: I2d664ab524d2b312233476cb35863dde3122e9a9
fixes: bz#1654370
Signed-off-by: Raghavendra Bhat

gfapi: revert several patchs that introduced pre/post attrs

2018-09-17T14:26:06+00:00

Reverted the following:
  - 248152767b0599986bbb6bb35fc27197f6be6964
  - 09943beb499617212f2985ca8ea9ecd1ed1b470e
  - d01f7244e9d9f7e3ef84e0ba7b48ef1b1b09d809

The reverts are redone by hand, due to clang format changes
that made using git to revert the changes more tedious.

Change-Id: I96489638a2b641fb2206a110298543225783f7be
Updates: bz#1628620
Signed-off-by: ShyamsundarR

Land part 2 of clang-format changes

2018-09-12T12:22:45+00:00

Change-Id: Ia84cc24c8924e6d22d02ac15f611c10e26db99b4
Signed-off-by: Nigel Babu

Land clang-format changes

2018-09-12T11:52:48+00:00

Change-Id: I6f5d8140a06f3c1b2d196849299f8d483028d33b

Multiple files: calloc -> malloc

2018-09-04T04:58:14+00:00

xlators/storage/posix/src/posix-inode-fd-ops.c:
xlators/storage/posix/src/posix-helpers.c:
xlators/storage/bd/src/bd.c:
xlators/protocol/client/src/client-lk.c:
xlators/performance/quick-read/src/quick-read.c:
xlators/performance/io-cache/src/page.c
xlators/nfs/server/src/nfs3-helpers.c
xlators/nfs/server/src/nfs-fops.c
xlators/nfs/server/src/mount3udp_svc.c
xlators/nfs/server/src/mount3.c
xlators/mount/fuse/src/fuse-helpers.c
xlators/mount/fuse/src/fuse-bridge.c
xlators/mgmt/glusterd/src/glusterd-utils.c
xlators/mgmt/glusterd/src/glusterd-syncop.h
xlators/mgmt/glusterd/src/glusterd-snapshot.c
xlators/mgmt/glusterd/src/glusterd-rpc-ops.c
xlators/mgmt/glusterd/src/glusterd-replace-brick.c
xlators/mgmt/glusterd/src/glusterd-op-sm.c
xlators/mgmt/glusterd/src/glusterd-mgmt.c
xlators/meta/src/subvolumes-dir.c
xlators/meta/src/graph-dir.c
xlators/features/trash/src/trash.c
xlators/features/shard/src/shard.h
xlators/features/shard/src/shard.c
xlators/features/marker/src/marker-quota.c
xlators/features/locks/src/common.c
xlators/features/leases/src/leases-internal.c
xlators/features/gfid-access/src/gfid-access.c
xlators/features/cloudsync/src/cloudsync-plugins/src/cloudsyncs3/src/libcloudsyncs3.c
xlators/features/bit-rot/src/bitd/bit-rot.c
xlators/features/bit-rot/src/bitd/bit-rot-scrub.c
bxlators/encryption/crypt/src/metadata.c
xlators/encryption/crypt/src/crypt.c
xlators/performance/md-cache/src/md-cache.c:

Move to GF_MALLOC() instead of GF_CALLOC() when possible

It doesn't make sense to calloc (allocate and clear) memory
when the code right away fills that memory with data.
It may be optimized by the compiler, or have a microscopic
performance improvement.

In some cases, also changed allocation size to be sizeof some
struct or type instead of a pointer - easier to read.
In some cases, removed redundant strlen() calls by saving the result
into a variable.

1. Only done for the straightforward cases. There's room for improvement.
2. Please review carefully, especially for string allocation, with the
terminating NULL string.

Only compile-tested!

.. and allocate memory as much as needed.

xlators/nfs/server/src/mount3.c :

Don't blindly allocate PATH_MAX, but strlen() the string and allocate
appropriately.
Also, align error messges.

updates: bz#1193929
Original-Author: Yaniv Kaul 
Signed-off-by: Yaniv Kaul 
Signed-off-by: Yaniv Kaul 
Change-Id: Ibda6f33dd180b7f7694f20a12af1e9576fe197f5

bit-rot xlator: strncpy()->sprintf(), reduce strlen()'s

2018-08-31T01:36:34+00:00

xlators/features/bit-rot/src/bitd/bit-rot-scrub-status.c
xlators/features/bit-rot/src/stub/bit-rot-stub-helpers.c
xlators/features/bit-rot/src/stub/bit-rot-stub.c
xlators/features/bit-rot/src/stub/bit-rot-stub.h

strncpy may not be very efficient for short strings copied into
a large buffer: If the length of src is less than n,
strncpy() writes additional null bytes to dest to ensure
that a total of n bytes are written.

Instead, use snprintf(). Ensure sprintf() results do not
truncate.

Also:
- save the result of strlen() and re-use it when possible.
- move from strlen to SLEN or sizeof() for const strings.
- move ret from int32 to int.

Compile-tested only!

Change-Id: Ib9b923c45d2d59ac15a105410e8160b252061018
updates: bz#1193929
Signed-off-by: Yaniv Kaul

All: run codespell on the code and fix issues.

2018-07-22T14:40:16+00:00

Please review, it's not always just the comments that were fixed.
I've had to revert of course all calls to creat() that were changed
to create() ...

Only compile-tested!

Change-Id: I7d02e82d9766e272a7fd9cc68e51901d69e5aab5
updates: bz#1193929
Signed-off-by: Yaniv Kaul

Fix compile warnings

2018-07-10T14:28:24+00:00

This patch fixes compile warnings that appear with newer compilers. The
solution applied is only to remove the warnings, but it doesn't always
solve the problem in the best way. It assumes that the problem will never
happen, as the previous code assumed.

Change-Id: I6e8470d6c2e2dbd3bd7d324b5fd2f92ffdc3d6ec
updates: bz#1193929
Signed-off-by: Xavi Hernandez

make posix return errors when gfid2path key is absent

2018-05-18T04:19:32+00:00

Change-Id: I3a8d452d00560dac5e0b7ff0b1835d1f20a59f91
updates: bz#1570962
Signed-off-by: Raghavendra Bhat

features/bitrot: print the path of the corrupted objects

2018-05-04T11:13:57+00:00

Currently "gluster volume bitrot  scrub status"
gives the list of the corrupted objects (files as of now).
But only the gfids of those corrupted objects are seen and
one has to do getfattr, find etc operations to get the actual
path of those objects for removal etc.

This change makes an attempt to print the path of those files
as much as possible.

* Try to get the path using the on disk gfid2path xattr.

* If the above operation fails, then go for in memory path
(provided that the object has its dentry
properly created and linked in the inode table of the brick where
the corrupted object is present) So the gfid to path resolution is
a soft resolution, i.e. based on the inode and dentry cache in the
brick's memory. If the path cannot be obtained via inode table also,
then only gfid is printed.

Change-Id: Ie9a30307f43a49a2a9225821803c7d40d231de68
fixes: bz#1570962
Signed-off-by: Raghavendra Bhat