glusterfs.git/xlators/cluster/ec, branch v3.8.2

cluster/ec: Unlock stale locks when inodelk/entrylk/lk fails

2016-07-29T10:50:49+00:00

Thanks to Rafi for hinting a while back that this kind of
problem he saw once. I didn't think the theory was valid.
Could have caught it earlier if I had tested his theory.

 >Change-Id: Iac6ffcdba2950aa6f8cf94f8994adeed6e6a9c9b
 >BUG: 1344836
 >Signed-off-by: Pranith Kumar K 
 >Reviewed-on: http://review.gluster.org/14703
 >Reviewed-by: Xavier Hernandez 
 >Smoke: Gluster Build System 
 >Tested-by: mohammed rafi  kc 
 >NetBSD-regression: NetBSD Build System 
 >CentOS-regression: Gluster Build System 

BUG: 1360576
Change-Id: If9ccf0b3db7159b87ddcdc7b20e81cde8c3c76f0
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/15025
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Xavier Hernandez 
CentOS-regression: Gluster Build System

cluster/ec: Handle absence of keys in some callback dict

2016-07-27T05:51:20+00:00

Problem: This issue arises when we do a rolling update
from 3.7.5 to 3.7.9.
For 4+2 volume running 3.7.5, if we update 2 nodes
and after heal completion  kill 2 older nodes, this
problem can be seen. After update and killing of
bricks, 2 nodes will return inodelk count key in dict
while other 2 nodes will not have inodelk count in dict.
This is also true for get-link-count.
During dictionary match , ec_dict_compare, this will
lead to mismatch of answers and the file operation
on mount point will fail with IO error.

Solution:
Don't match inode, entry and link count keys while
comparing two dictionaries. However, while combining the
data in ec_dict_combine, go through all the dictionaries
and select the maximum values received in different dicts
for these keys.

master -
http://review.gluster.org/#/c/14761/

Change-Id: I33546e3619fe8f909286ee48fb0df2009cd3d22f
BUG: 1360174
Signed-off-by: Ashish Pandey 
Reviewed-on: http://review.gluster.org/14761
Reviewed-by: Xavier Hernandez 
Smoke: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Signed-off-by: Ashish Pandey 
Reviewed-on: http://review.gluster.org/15013

cluster/ec: Fix race in timer cancellation

2016-07-04T13:28:08+00:00

A race in timer cancellation for delayed unlock could cause a crash
if the cancelling thread fails to cancel the timer because it has
already been fired but not executed, and the callback is scheduled
out of the CPU, delaying it until the thread has released important
resources needed by the callback.

This patch improves the handling of this case to make it robust.

Backport of:
> Change-Id: I5c8a8c6610c5136f71b938aa78b5878ba05238d4
> BUG: 1345855
> Signed-off-by: Xavier Hernandez 
> Reviewed-on: http://review.gluster.org/14712
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Pranith Kumar Karampuri 

Change-Id: I5c8a8c6610c5136f71b938aa78b5878ba05238d4
BUG: 1346158
Signed-off-by: Xavier Hernandez 
Reviewed-on: http://review.gluster.org/14723
Smoke: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

cluster/ec: Pass xdata to dht in case of error

2016-06-13T10:17:37+00:00

Problem: In case of mkdir failure, dht expects
error information so that it can act accordingly.
Aftre adding bricks and re balance, layout gets
changed. Fop "mkdir" with old layout returns EIO.
EC gets this error in xdata but does not pass it
back to dht. In this case dht will not be able to
take corrective action.

Solution: Return xdata back to dht

master -
http://review.gluster.org/#/c/14679/

Change-Id: I24def8038e6880607689b7b046dc6428f564c6ab
BUG: 1344594
Signed-off-by: Ashish Pandey 
Reviewed-on: http://review.gluster.org/14690
Smoke: Gluster Build System 
Reviewed-by: Xavier Hernandez 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Niels de Vos

cluster/ec: Fix invalid __fd_unref() call

2016-06-13T10:16:17+00:00

__fd_unref() doesn't do any cleanup, so it cannot be called to release
fd references, specially if it's the last reference.

The code has been changed to avoid a call to this function.

In the previous version we always tried to keep the newest fd in the
ec_lock_t structure. However this is not necessary. We'll always keep
one reference to an open file on the same inode. It's irrelevant if
the reference is new or old.

The function __fd_unref() has also been removed from fd.h to avoid being
used in the future since it's useless as it's defined now.

Backport of http://review.gluster.org/14683

Change-Id: Ia728777fc8e464758d5ea4d3bf020f0603919039
BUG: 1344421
Signed-off-by: Xavier Hernandez 
Reviewed-on: http://review.gluster.org/14684
CentOS-regression: Gluster Build System 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Ashish Pandey 
Reviewed-by: Niels de Vos

cluster/ec: Restrict the launch of replace brick heal

2016-06-13T10:12:12+00:00

Problem: When features.cache-invalidation is ON, a lot of
ec_notify function gets called which leads to launch of
too many heals. This leads to no heal completion,
which causes accumulation of heals.

Solution: ec_launch_replace_heal should not be launch
for every event. Replace brick will trigger a child up
event and then only this heal function should be called.

master -
http://review.gluster.org/#/c/14649/

Change-Id: I57b44c6a279d57230daea1d93229be6069245b7d
BUG: 1342954
Signed-off-by: Ashish Pandey 
Reviewed-on: http://review.gluster.org/14651
Reviewed-by: Xavier Hernandez 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System

cluster/ec: Use correct log levels

2016-05-30T14:38:00+00:00

Problem :
Misleading messages are getting logged in mount logs
and bricks log.
"Mismatching xdata" and "Heal failed" are getting logged

Solution :
Reduce the level of logs from INFO, WARNING and NOTICE
to DEBUG level wherever applicable OR use fop_log_level
to get proper log level.

Backport of commit 02b2750ecc35f88c3262015b401dda962381f9da:
> Change-Id: Ia824c71e75ab683d3cb8949e1966ea09c9ccce72
> BUG: 1231224
> Signed-off-by: Ashish Pandey 
> Reviewed-on: http://review.gluster.org/13266
> Smoke: Gluster Build System 
> Reviewed-by: Xavier Hernandez 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Pranith Kumar Karampuri 

Change-Id: Ia824c71e75ab683d3cb8949e1966ea09c9ccce72
BUG: 1254934
Signed-off-by: Ashish Pandey 
Reviewed-on: http://review.gluster.org/14520
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Smoke: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri 
Reviewed-by: Niels de Vos

core: assorted typos and spelling mistakes reported by Debian lintian

2016-05-18T13:55:02+00:00

Also missing bang (!) in #!/bin/bash in shell scripts.

Backport of
> http://review.gluster.org/#/c/14398/
> BUG: 1336793
> Change-Id: I567a4be8f0f31f6285550f243fe802895f6bc43b

Change-Id: I003554daede9937a41010e085c74e77957c5c608
BUG: 1336794
Reported-by: Patrick Matthäi 
Signed-off-by: Kaleb S KEITHLEY 
Reviewed-on: http://review.gluster.org/14400
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System

cluster/ec: Fix issues with eager locking

2016-05-06T14:31:44+00:00

Due to a race in timer cancellation, in some cases it was possible
to unlock the lock while another concurrent fop that needed it
continues execution as if it were not released.

This patch also fixes an issue that caused a lock to not be released
if an error was found while preparing ec_update_size_version().

> Change-Id: I1344a3f5ecfc333f05a09e62653838264c9c26b1
> BUG: 1331254
> Signed-off-by: Xavier Hernandez 
> Reviewed-on: http://review.gluster.org/14112
> Smoke: Gluster Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Chen Chen 
> NetBSD-regression: NetBSD Build System 

Change-Id: I9ccd585a9b9952b6787cfca6720bc59b9c8ddab9
BUG: 1332845
Signed-off-by: Xavier Hernandez 
Reviewed-on: http://review.gluster.org/14206
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Niels de Vos

cluster/afr: Don't lookup/forget inodes

2016-03-31T12:46:32+00:00

Problem:
All inodes that are looked-up are always forgotten without fail in
afr removing the benefits of them being in lru. This same code can
cause crashes if between inode_lookup, inode_forget in afr if the
top xlator does inode_forget(0).

Fix:
Don't use lookup/forget in afr. No benefits are there at the moment
for keeping this code. It is impossible to prevent top xlators to
do inode_forget(0). Found similar instances in ec
and removed them even though those code paths are not going to
be executed in any place other than heal-daemon.

BUG: 1321554
Change-Id: Ia4cb236178f7f129cc898d53f0bbd26f494a2a8d
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/13834
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Anuradha Talur