glusterfs.git/tests/bugs/snapshot, branch release-3.8-fb

Fixes quota aux mount failure

2017-06-19T04:56:43+00:00

The aux mount is created on the first limit/remove_limit/list command
and it remains until volume is stopped / deleted / (quota is disabled)
, where we do a lazy unmount. If the process is uncleanly terminated,
then the mount entry remains and we get (Transport disconnected) error
on subsequent attempts to run quota list/limit-usage/remove commands.

Second issue, There is also a risk of inadvertent rm -rf on the
/var/run/gluster causing data loss for the user. Ideally, /var/run is
a temp path for application use and should not cause any data loss to
persistent storage.

Solution:
1) unmount the aux mount after each use.
2) clean stale mount before mounting, if any.

One caveat with doing mount/unmount on each command is that we cannot
use same mount point for both list and limit commands.
The reason for this is that list command needs mount to be accessible
in cli after response from glusterd, So it could be unmounted by a
limit command if executed in parallel (had we used same mount point)
Hence we use separate mount points for list and limit commands.

> Reviewed-on: https://review.gluster.org/16938
> NetBSD-regression: NetBSD Build System 
> Smoke: Gluster Build System 
> Reviewed-by: Manikandan Selvaganesh 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Raghavendra G 
> Reviewed-by: Atin Mukherjee 
> (cherry picked from commit 2ae4b4058691b324535d802f4e6d24cce89a10e5)

Change-Id: I4f9e39da2ac2b65941399bffb6440db8a6ba59d0
BUG: 1449782
Signed-off-by: Sanoj Unnikrishnan 
Reviewed-on: https://review.gluster.org/17242
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra G

tests: Fix spurious test failure in bug-1316437.t

2016-12-20T07:25:50+00:00

After sending SIGTERM to gluster process we immediately
check if process exited. We should wait for some time
before checking process state.


> Reviewed-on: http://review.gluster.org/16162
> Smoke: Gluster Build System 
> Reviewed-by: Avra Sengupta 
> NetBSD-regression: NetBSD Build System 
> Reviewed-by: N Balachandran 
> CentOS-regression: Gluster Build System 
(cherry picked from commit e9d8525a0d34130ba2a582109937b8e79eecf6ab)

BUG: 1405450
Change-Id: Iaba0067f6e880a7fe38e11b9fa0fe9bd103b19e2
Signed-off-by: Rajesh Joseph 
Reviewed-on: http://review.gluster.org/16164
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Avra Sengupta

uss: snapd should enable SSL if SSL is enabled on volume

2016-12-11T10:09:47+00:00

During snapd graph generation we should check if SSL is
enabled on main volume or not. This is because clients
will communicate with snapd as if it is communicating to
a brick.


> Reviewed-on: http://review.gluster.org/15979
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Kaushal M 
(cherry picked from commit 182f0d12040dab5081ca645a3f370f65cd68b528)

Change-Id: I0d7fe86c567b297a8528a48faf06161d4c3cb415
Signed-off-by: Rajesh Joseph 
BUG: 1400459
Reviewed-on: http://review.gluster.org/15986
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Atin Mukherjee

snapshot/snapd: Don't display pid when snapd is offline

2016-08-02T06:19:02+00:00

    Backport of http://review.gluster.org/#/c/14981/

We were previously reading the pidfile, and displaying
the pid even if snapd daemon is not running. Now to fix
it, we re-assign pid value to -1, if snapd is offline.

> Reviewed-on: http://review.gluster.org/14981
> Tested-by: Vijay Bellur 
> NetBSD-regression: NetBSD Build System 
> Smoke: Gluster Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Jeff Darcy 

(cherry picked from commit ec6925a379c7bee071df1638bc2751b266cee346)

Change-Id: I4baff8d489fe9380061c52aea006db90fa421cd7
BUG: 1360985
Signed-off-by: Avra Sengupta 
Reviewed-on: http://review.gluster.org/15033
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Rajesh Joseph

tests: Fix spurious failure of tests/bugs/glusterd/bug-1111041.t

2016-07-21T11:05:43+00:00

On a faster machine the ps check was returning two pids,
including the glusterfsd process's pid, right after that,
process forked. Hence removing that ps, as for the scope
of this test, verifying the snapd pid from the status
command itself is enough.

> Reviewed-on: http://review.gluster.org/14963
> Smoke: Gluster Build System 
> Reviewed-by: Rajesh Joseph 
> Reviewed-by: Atin Mukherjee 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 

(cherry picked from commit be69510e670cb5ee893399ca1d7e7d2a60a9483c)

Change-Id: I8bd8fc4ea406d96e3a47f952cfe44560b615dbe6
BUG: 1358591
Signed-off-by: Avra Sengupta 
Reviewed-on: http://review.gluster.org/14969
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee

glusterd: default value of nfs.disable, change from false to true

2016-04-27T07:59:30+00:00

Next step in eventual deprecation of glusterfs nfs server in favor
of ganesha.nfsd.

Also replace several open-coded strings with constant.

Change-Id: If52f5e880191a14fd38e69b70a32b0300dd93a50
BUG: 1092414
Signed-off-by: Kaleb S KEITHLEY 
Reviewed-on: http://review.gluster.org/13738
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee 
Tested-by: Atin Mukherjee 
Reviewed-by: Niels de Vos

tests: fix regression failure from bug-1322772-real-path-fix-for-snapshot.t

2016-04-12T16:30:26+00:00

There is no need to unmount the brick as doing so we loose all the xattrs on the
brick and while restarting glusterd brick doesn't come up

Change-Id: Ic1fa8b72f6cfcad564c62bcef1d022b083263ecc
Signed-off-by: Atin Mukherjee 
Reviewed-on: http://review.gluster.org/13974
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

glusterd: build realpath post recreate of brick mount for snapshot

2016-04-05T10:46:44+00:00

Commit a60c39d introduced a new field called real_path in brickinfo to hold the
realpath() conversion. However at restore path for all snapshots and snapshot
restored volumes the brickpath gets recreated post restoration of bricks  which
means the realpath () call will fail here for all the snapshots and cloned
volumes.

Fix is to store the realpath for snapshots and clones post recreating the brick
mounts. For normal volume it would be done during retrieving the brick details
from the store.

Change-Id: Ia34853acddb28bcb7f0f70ca85fabcf73276ef13
BUG: 1322772
Signed-off-by: Atin Mukherjee 
Reviewed-on: http://review.gluster.org/13869
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Avra Sengupta 
Reviewed-by: Rajesh Joseph 
Smoke: Gluster Build System

snapshot: Use svc->manager during glusterd restart

2016-03-11T08:05:28+00:00

Instead of using svc->start, we should use svc->manager
as it takes care of initializing svc too, and both starts
and stops snapd as needed.

Change-Id: I3d3afdf4c4203bee3b790a017b820339fd376af6
BUG: 1316437
Signed-off-by: Avra Sengupta 
Reviewed-on: http://review.gluster.org/13665
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Rajesh Joseph

tests: Add mechanism for disabled tests

2016-03-10T07:19:40+00:00

Requirements:
Should be able to skip tests from run-tests.sh run.
Should be granular enough to disable on subset of OSes.

Solution:
Tests can have special comment lines with some comma separated values
within them.

Key names used to determine test status are
G_TESTDEF_TEST_STATUS_CENTOS6
G_TESTDEF_TEST_STATUS_NETBSD7
Some examples:
G_TESTDEF_TEST_STATUS_CENTOS6=BAD_TEST,BUG=123456
G_TESTDEF_TEST_STATUS_NETBSD7=KNOWN_ISSUE,BUG=4444444
G_TESTDEF_TEST_STATUS_CENTOS6=BAD_TEST,BUG=123456;555555
You can change status of test to enabled or delete the line only if all the
bugs are closed or modified or if the patch fixes it.

Change-Id: Idee21fecaa5837fd4bd06e613f5c07a024f7b0c2
BUG: 1295704
Signed-off-by: Raghavendra Talur 
Reviewed-on: http://review.gluster.org/13393
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Rajesh Joseph 
Reviewed-by: Kaushal M