glusterfs.git/tests/bugs/replicate, branch v3.10dev

glusterd : Introduce reset brick

2016-08-30T02:55:53+00:00

The command basically allows replace brick with src and
dst bricks as same.

Usage:
gluster v reset-brick   start
This command kills the brick to be reset. Once this command is run,
admin can do other manual operations that they need to do,
like configuring some options for the brick. Once this is done,
resetting the brick can be continued with the following options.

gluster v reset-brick    commit {force}

Does the job of resetting the brick. 'force' option should be used
when the brick already contains volinfo id.

Problem: On doing a disk-replacement of a brick in a replicate volume
the following 2 scenarios may occur :

a) there is a chance that reads are served from this replaced-disk brick,
which leads to empty reads. b) potential data loss if next writes succeed
only on replaced brick, and heal is done to other bricks from this one.

Solution: After disk-replacement, make sure that reset-brick command is
run for that brick so that pending markers are set for the brick and it
is not chosen as source for reads and heal. But, as of now replace-brick
for the same brick-path is not allowed. In order to fix the above
mentioned problem, same brick-path replace-brick is needed.
With this patch reset-brick commit {force} will be allowed even when
source and destination  are identical as long as
1) destination brick is not alive
2) source and destination brick have the same brick uuid and path.
Also, the destination brick after replace-brick will use the same port
as the source brick.

Change-Id: I440b9e892ffb781ea4b8563688c3f85c7a7c89de
BUG: 1266876
Signed-off-by: Anuradha Talur 
Reviewed-on: http://review.gluster.org/12250
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Ashish Pandey 
Reviewed-by: Pranith Kumar Karampuri

tests: change EXPECT_WITHIN timeouts

2016-08-29T06:09:42+00:00

Use defined HEAL and PROCESS_UP timeouts rather than
hard code them in self-heald.t.

Change-Id: I21586811904c8417b7208bb643f14dff20dc4832
BUG: 1370074
Signed-off-by: Anuradha Talur 
Reviewed-on: http://review.gluster.org/15316
Reviewed-by: Ravishankar N 
Tested-by: Ravishankar N 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Krutika Dhananjay 
CentOS-regression: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri

cluster/afr: Prevent split-brain when bricks are brought off and on in cyclic order

2016-08-22T09:38:36+00:00

When the bricks are brought offline and then online in cyclic
order while writes are in progress on a file, thanks to inode
refresh in write txns, AFR will mostly fail the write attempt
when the only good copy is offline. However, there is still a
remote possibility that the file will run into split-brain if
the brick that has the lone good copy goes offline *after* the
inode refresh but *before* the write txn completes (I call it
in-flight split-brain in the patch for ease of reference),
requiring intervention from admin to resolve the split-brain
before the IO can resume normally on the file. To get around this,
the patch does the following things:
i) retains the dirty xattrs on the file
ii) avoids marking the last of the good copies as bad (or accused)
    in case it is the one to go down during the course of a write.
iii) fails that particular write with the appropriate errno.

This way, we still have one good copy left despite the split-brain situation
which when it is back online, will be chosen as source to do the heal.

Change-Id: I9ca634b026ac830b172bac076437cc3bf1ae7d8a
BUG: 1363721
Signed-off-by: Krutika Dhananjay 
Reviewed-on: http://review.gluster.org/15080
Tested-by: Pranith Kumar Karampuri 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Ravishankar N 
Reviewed-by: Oleksandr Natalenko 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Pranith Kumar Karampuri

glusterd: Convert volume to replica after adding brick self heal is not triggered

2016-08-11T09:11:29+00:00

Problem:  After add brick to a distribute volume to convert to replica is not
          triggering self heal.

Solution: Modify the condition in brick_graph_add_index to set trusted.afr.dirty
          attribute in xlator.

Test    : To verify the patch followd below steps
          1) Create a single node volume
             gluster volume create  
          2) Start volume and create mount point
             mount -t glusterfs :/DIS /mnt
          3) Touch some file and write some data on file
          4) Add another brick along with replica 2
             gluster volume add-brick DIS replica 2 :/dist2/brick2
          5) Before apply the patch file size is 0 bytes in mount point.

BUG: 1365455
Change-Id: Ief0ccbf98ea21b53d0e27edef177db6cabb3397f
Signed-off-by: Mohit Agrawal 
Reviewed-on: http://review.gluster.org/15118
NetBSD-regression: NetBSD Build System 
Reviewed-by: Ravishankar N 
Reviewed-by: Anuradha Talur 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee

io-threads: remove least-rate-limit option and code

2016-07-28T14:50:52+00:00

This will be unnecessary, and mostly in the way, as real fairness
guarantees are implemented.

Change-Id: Ic61ec1c9e9add58385f1a4eafcfe2cc554ceefc8
BUG: 1360402
Signed-off-by: Jeff Darcy 
Reviewed-on: http://review.gluster.org/14989
Smoke: Gluster Build System 
Tested-by: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: Gluster Build System

afr: some coverity fixes

2016-07-26T17:06:52+00:00

Thanks to Krutika for a cleaner way to track inode refs in
afr_set_split_brain_choice().

Change-Id: I2d968d05b815ad764b7e3f8aa9ad95a792b3c1df
BUG: 1355604
Signed-off-by: Ravishankar N 
Reviewed-on: http://review.gluster.org/14895
Reviewed-by: Pranith Kumar Karampuri 
Tested-by: Pranith Kumar Karampuri 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

afr:Don't wind reads for files in metadata split-brain

2016-06-24T11:26:01+00:00

Problem: For a read on  a file in metadata split-brain:
1.lookup_done resets event_generation to zero.
2. readv is issued, goes to inode refresh due to mismatching event_gen.
3. After refresh is successful, we update event_generation, data and
metdata readable.
3. We then call afr_read_txn_refresh_done() which in turn calls
afr_inode_get_readable() but doesn't check for EIO. So afr_readv_wind
is called with local->readable (which is populated with data_readable),
thus winding the read to a brick.
4. Also, further parallel reads that come directly go to the wind path
because there is no inode_refresh needed.

Fix:
1.For any afr_read_txn(), readable must be an intersection of data and metadata
readable.
2.Check for EIO in afr_read_txn_refresh_done().

Change-Id: I22dd221fdfaf96d7aced2f474e28ed1337d69f0e
BUG: 1305031
Signed-off-by: Ravishankar N 
Reviewed-on: http://review.gluster.org/13389
Reviewed-by: Ashish Pandey 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri

afr: Consider ENOSPC and EDQUOT as symmetric errors

2016-06-13T05:58:48+00:00

Problem:
Since commit 8eaa3506ead4f11b81b146a9e56575c79f3aad7b, in replica 3, if a
brick is down and a create fails on the other 2 brick with EDQUOT, we consider
it an unsymmetric error and hence do not do post-op. So the dirty xattr
remains set on the parent dir, leading to conservative merges during heal when
all bricks are up. i.e. a file deleted on the source might re-appear after heal.

Fix:
Consider ENOSPC and  EDQUOT as symmetric errors since there is no
possibility of partial inode or entry modification operations possible when
quota is enabled. IOW, if quota reports EDQUOT, the no. of bytes written
(or not written) will be the same on all bricks of the replica.
Likewise, the entry operation (create, mkdir...) will either succeed or
not succeed on all bricks.

Change-Id: Iacb1108e9ef4a918e36242fb4a957455133744e9
BUG: 1341650
Signed-off-by: Ravishankar N 
Reviewed-on: http://review.gluster.org/14604
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee 
Tested-by: Atin Mukherjee

cluster/afr adding test case for http://review.gluster.org/#/c/14553/

2016-05-31T14:01:09+00:00

Change-Id: I23865343021ae65a36f6abc74d6bd594efd9dc7e
BUG: 1340623
Signed-off-by: Jiffin Tony Thottan 
Reviewed-on: http://review.gluster.org/14561
Reviewed-by: Pranith Kumar Karampuri 
Tested-by: Pranith Kumar Karampuri 
Reviewed-by: Anuradha Talur 
Reviewed-by: Ravishankar N 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

cluster/afr: Do not inode_link in afr

2016-05-20T09:55:55+00:00

Race is explained at
https://bugzilla.redhat.com/show_bug.cgi?id=1337405#c0

This patch also handles performing of self-heal with shd-pid.
Also performs the healing with this->itable's inode rather than
main itable.

BUG: 1337405
Change-Id: Id657a6623b71998b027b1dff6af5bbdf8cab09c9
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/14422
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Krutika Dhananjay