glusterfs.git/tests/bugs/quota, branch v6dev

glusterd: Add multiple checks before attach/start a brick

2018-07-27T01:24:09+00:00

Problem: In brick mux scenario sometime glusterd is not able
         to start/attach a brick and gluster v status shows
         brick is already running

Solution:
          1) To make sure brick is running check brick_path in
             /proc//fd , if a brick is consumed by the brick
             process it means brick stack is come up otherwise not
          2) Before start/attach a brick check if a brick is mounted
             or not
          3) At the time of printing volume status check brick is
             consumed by any brick process

Test:  To test the same followed procedure
       1) Setup brick mux environment on a vm
       2) Put a breaking point in gdb in function posix_health_check_thread_proc
          at the time of notify GF_EVENT_CHILD_DOWN event
       3) unmount anyone brick path forcefully
       4) check gluster v status it will show N/A for the brick
       5) Try to start volume with force option, glusterd throw
          message "No device available for mount brick"
       6) Mount the brick_root path
       7) Try to start volume with force option
       8) down brick is started successfully

Change-Id: I91898dad21d082ebddd12aa0d1f7f0ed012bdf69
fixes: bz#1595320
Signed-off-by: Mohit Agrawal

Quota: Fix crawling of files

2018-07-13T07:34:48+00:00

Problem: Running "find ." does not crawl files. It goes over the
directories and lists all dentries with getdents system call.
Hence the files are not looked up.

Solution:
explicitly triggerr stat on files with find . -exec stat {} \;
since crawl can take slightly longer, updating timeout in test case

Change-Id: If3c1fba2ed8e300c9cc08c1b5c1ba93cb8e4d6b6
fixes: bz#1533000
Signed-off-by: Sanoj Unnikrishnan

tests: Fix prove test bug-1292020.t

2017-12-05T21:46:20+00:00

dd is doing a statfs and failing with ENOSPC instead of writign and
getting EDQUOTA. Make either error a success in this test.

> Signed-off-by: Kevin Vigor 
> Reviewed-on: http://review.gluster.org/16352
BUG: 1521116
Signed-off-by: ShyamsundarR 
Change-Id: I9f580d9e4a4dd293df55a1d954f86a9862fcae7b

tests: Update tier CLI in .t files

2017-10-30T15:50:44+00:00

Update .t tier tests to use the new tier CLI.

Change-Id: I0e7f1769071108d8266fc86378c4466bcaf96e7d
BUG: 1505253
Signed-off-by: N Balachandran

glusterfsd: allow subdir mount

2017-08-04T05:26:42+00:00

Changes:

1. Take subdir mount option in client (mount.gluster / glusterfsd)
2. Pass the subdir mount to server-handshake (from client-handshake)
3. Handle subdir-mount dir's lookup in server-first-lookup and handle
   all fops resolution accordingly with proper gfid of subdir
4. Change the auth/addr module to handle the multiple subdir entries
   in option, and valid parsing.

How to use the feature:

`# mount -t glusterfs $hostname:/$volname/$subdir /$mount_point`
Or
`# mount -t glusterfs $hostname:/$volname -osubdir_mount=$subdir /$mount_point`

Option can be set like:

`# gluster volume set  auth.allow "/subdir1(192.168.1.*),/(192.168.10.*),/subdir2(192.168.8.*)"`

Updates #175

Change-Id: I7ea57f76ddbe6c3862cfe02e13f89e8a39719e11
Signed-off-by: Amar Tumballi 
Reviewed-on: https://review.gluster.org/17141
Smoke: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan 
CentOS-regression: Gluster Build System

Fixes quota aux mount failure

2017-05-08T06:15:55+00:00

The aux mount is created on the first limit/remove_limit/list command
and it remains until volume is stopped / deleted / (quota is disabled)
, where we do a lazy unmount. If the process is uncleanly terminated,
then the mount entry remains and we get (Transport disconnected) error
on subsequent attempts to run quota list/limit-usage/remove commands.

Second issue, There is also a risk of inadvertent rm -rf on the
/var/run/gluster causing data loss for the user. Ideally, /var/run is
a temp path for application use and should not cause any data loss to
persistent storage.

Solution:
1) unmount the aux mount after each use.
2) clean stale mount before mounting, if any.

One caveat with doing mount/unmount on each command is that we cannot
use same mount point for both list and limit commands.
The reason for this is that list command needs mount to be accessible
in cli after response from glusterd, So it could be unmounted by a
limit command if executed in parallel (had we used same mount point)
Hence we use separate mount points for list and limit commands.

Change-Id: I4f9e39da2ac2b65941399bffb6440db8a6ba59d0
BUG: 1433906
Signed-off-by: Sanoj Unnikrishnan 
Reviewed-on: https://review.gluster.org/16938
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
Reviewed-by: Manikandan Selvaganesh 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra G 
Reviewed-by: Atin Mukherjee

core: run many bricks within one glusterfsd process

2017-01-31T00:13:58+00:00

This patch adds support for multiple brick translator stacks running
in a single brick server process.  This reduces our per-brick memory usage by
approximately 3x, and our appetite for TCP ports even more.  It also creates
potential to avoid process/thread thrashing, and to improve QoS by scheduling
more carefully across the bricks, but realizing that potential will require
further work.

Multiplexing is controlled by the "cluster.brick-multiplex" global option.  By
default it's off, and bricks are started in separate processes as before.  If
multiplexing is enabled, then *compatible* bricks (mostly those with the same
transport options) will be started in the same process.

Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb
BUG: 1385758
Signed-off-by: Jeff Darcy 
Reviewed-on: https://review.gluster.org/14763
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Vijay Bellur

features/trash: Create trash directory only when it is enabled

2017-01-20T12:12:20+00:00

Previously trash directory was being created as part of volume
start operation. And also the user/admin could not delete this
directory from volume even if it is not needed. This patch will
fix the same. From now onwards creation and enforcement on trash
directory will come into pictrure only when trash translator is
enabled. Similarly exact same behaviour is reflected on internal-op
directory inside trash directory.

Change-Id: I3e58316a7b299a691885e458c960438bec2220fb
BUG: 1264849
Signed-off-by: Jiffin Tony Thottan 
Reviewed-on: http://review.gluster.org/12256
Smoke: Gluster Build System 
Tested-by: Anoop C S 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Anoop C S 
Reviewed-by: Jeff Darcy

performance/write-behind: guaranteed retry after a short write

2016-05-04T12:01:46+00:00

* Don't mark the request with a fake EIO after a short write.
* retry the remaining buffer at least once before unwinding reply to
  application. This way we capture correct error from backend (ENOSPC,
  EDQUOT etc).

Thanks to "Vijaikumar Mallikarjuna" for the test
script.

Change-Id: I73a18b39b661a7424db1a7855a980469a51da8f9
BUG: 1292020
Signed-off-by: Raghavendra G 
Reviewed-on: http://review.gluster.org/13438
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

quota/glusterd: enhance quota enable and disable process

2016-04-29T10:11:35+00:00

Previously quota crawl was done from the single mount point,
this is very slow process if there are huge number of files exists
in the volume

This RFE will now spawn crawl process for each brick in the
volume, and  files are looked in parallel independently for each
brick. This improves the speed of crawling process for
entire files-system

This patch also fixes below problem
* Previously, mountdir was created under '/tmp'.
  If someone tries to cleanup '/tmp'/ directory
  then it is very dangerous that we loose volume data
  So create a mount point under /var/run/gluster/tmp
  instead

* Previously, file-system crawl is performed from all the nodes,
  which is a redundant operation and performance will degrade
  The problem is fixed with this patch

Change-Id: Icabedeb44182139ace9c8106793803122388cab8
BUG: 1290766
Signed-off-by: vmallika 
Reviewed-on: http://review.gluster.org/12952
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Manikandan Selvaganesh 
Reviewed-by: Atin Mukherjee