glusterfs.git/tests/bugs/distribute, branch v3.7.18

cluster/distribute: heal layout in discover codepath too

2016-06-22T13:21:06+00:00

Change-Id: Ic559c220a1f0051e531314d13940604e2dead08c
BUG: 1336284
Signed-off-by: Raghavendra G 
Reviewed-on: http://review.gluster.org/14349
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System

tests: Backport all changes to tests dir

2016-05-04T18:47:11+00:00

Test framework should be the same on all the branches. This is a copy
of all the files under tests dir from master branch. New tests in
master have not been backported, but changes to existing tests have
been.

Change-Id: I75747c525aabbd9247473dd29b3a0e7a7d93c827
BUG: 1316533
Signed-off-by: Raghavendra Talur 
Reviewed-on: http://review.gluster.org/13683
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

glusterd: check if glusterd is started on all nodes and all

2016-04-29T06:59:42+00:00

          bricks are started before performing rebalance

Backport of http://review.gluster.org/#/c/10906/

> Change-Id: I458ea9cd86cf35bdb7d758be55f951ae9f3e66f0
> BUG: 1224857
> Signed-off-by: Sakshi 
> Reviewed-on: http://review.gluster.org/10906
> Smoke: Gluster Build System 
> CentOS-regression: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> Reviewed-by: Atin Mukherjee 

BUG: 1312722
Change-Id: Ib8e59b33e064be8301f682a4b08cb5cf10c22fc9
Signed-off-by: Sakshi 
Signed-off-by: Raghavendra Talur 
Reviewed-on: http://review.gluster.org/13537
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System

cluster/dht: Don't set posix acls on linkto files

2015-09-01T04:11:52+00:00

Posix acls on a linkto file change the file's permission
bits and cause DHT to treat it as a non-linkto file.This
happens on the migration failure of a file on which posix
 acls were set.

The fix prevents posix acls from being set on a linkto
file and copies them across only after a file has
been successfully migrated.

Change-Id: Iccf7ff6fba49fe05d691d9b83bf76a240848b212
BUG: 1258377
Signed-off-by: Nithya Balachandran 
Reviewed-on: http://review.gluster.org/12025
Tested-by: NetBSD Build System 
Reviewed-by: Raghavendra G 
Reviewed-by: Pranith Kumar Karampuri 
Signed-off-by: N Balachandran 
Reviewed-on: http://review.gluster.org/12062
Tested-by: Gluster Build System

features/quota : Fix spurious failure

2015-07-14T04:02:21+00:00

This is a backport of http://review.gluster.org/#/c/11125/

Problem : Basically, in this test case a file is created
which exceeds the quota limit. Once the limit is reached
that file will be deleted. At the same moment we are
testing inode-quota. It can so happen that before the
marker updates the information related to deletion of
file, a new file creation operation comes and sees that
quota limit is still exceeded.

Solution : Inducing a check to see if marker updation
completed successfully.

Updated all the test case which has the similar
machanism and also moved the "usage" function
to a common place "volume.rc"

> Change-Id: I36ddbc5ebbf1b74c9d326a0d1d5f3b32f20a906a
> BUG: 1229297
> Signed-off-by: Sachin Pandit 
> Signed-off-by: vmallika 
> Reviewed-on: http://review.gluster.org/11125
> Tested-by: NetBSD Build System 
> Tested-by: Gluster Build System 
> Reviewed-by: Krishnan Parthasarathi 

Change-Id: Iccc36de2b3a1e1a068d1a8d5e98d413c3afa1bc7
BUG: 1242329
Signed-off-by: vmallika 
Reviewed-on: http://review.gluster.org/11642
Tested-by: NetBSD Build System 
Tested-by: Gluster Build System 
Reviewed-by: Krishnan Parthasarathi

cluster/dht: Fix dht_setxattr to follow files under migration

2015-06-04T12:03:59+00:00

If a file is under migration, then any xattrs created on it
are lost post migration of the file. This is because
the xattrs are set only on the cached subvol of the source
and as the source is under migration, it becomes a linkto file
post migration.

Change-Id: Ib8e233b519cf954e7723c6e26b38fa8f9b8c85c0
BUG: 1225839
Signed-off-by: Nithya Balachandran 
Reviewed-on: http://review.gluster.org/10968
Tested-by: Gluster Build System 
Reviewed-by: Raghavendra G 
Tested-by: Raghavendra G

Quota: fix testcases not to send parallel writes for accurate

2015-05-29T06:29:07+00:00

 quota enforcement

This is a backport of http://review.gluster.org/#/c/10878

> Currently quota enforcer doesn't consider parallel writes
> and allows quota to exceed limit where there are high rate
> of parallel writes. Bug# 1223658 tracks the issue.
>
> This patch fixes the spurious failures by not sending
> parallel writes.
> Using O_SYNC and O_APPEND flags and block size
> not more that 256k (For higher block size NFS client
> splits the block into 256k chinks and does parallel writes)
>
> Change-Id: I297c164b030cecb87ce5b494c02b09e8b073b276
> BUG: 1223798
> Signed-off-by: vmallika 
> Reviewed-on: http://review.gluster.org/10878
> Tested-by: NetBSD Build System
> Tested-by: Gluster Build System 
> Reviewed-by: Raghavendra G 
> Tested-by: Raghavendra G 

Change-Id: I78b6250eb0b3fbbbab1d4348d4e81d6292c6c6bb
BUG: 1224894
Signed-off-by: vmallika 
Reviewed-on: http://review.gluster.org/10910
Tested-by: Gluster Build System 
Tested-by: NetBSD Build System
Reviewed-by: Pranith Kumar Karampuri

dht: make lookup-unhashed=auto do something actually useful

2015-05-10T04:55:09+00:00

The key concept here is to determine whether a directory is "clean" by
comparing its last-known-good topology to the current one for the
volume.  These are stored as "commit hashes" on the directory and the
volume root respectively.  The volume's commit hash changes whenever a
brick is added or removed, and a fix-layout is done.  A directory's
commit hash changes only when a full rebalance (not just fix-layout)
is done on it.  If all bricks are present and have a directory
commit hash that matches the volume commit hash, then we can assume
that every file is in its "proper" place. Therefore, if we look for
a file in that proper place and don't find it, we can assume it's not
on any other subvolume and *safely* skip the global (broadcast to all)
lookup.

Change-Id: Id6ce4593ba1f7daffa74cfab591cb45960629ae3
BUG: 1220064
Reviewed-on-master: http://review.gluster.org/#/c/7702/
Signed-off-by: Jeff Darcy 
Signed-off-by: Shyam 
Reviewed-on: http://review.gluster.org/10729
Tested-by: Gluster Build System 
Reviewed-by: Krishnan Parthasarathi 
Reviewed-by: Vijay Bellur

tests: Fix spurious failures

2015-05-06T06:02:17+00:00

        Backport of: http://review.gluster.org/10480
                     http://review.gluster.org/10487
                     http://review.gluster.org/10488
                     http://review.gluster.com/10540

- Use REBALANCE_TIMEOUT in EXPECT_WITHIN
- Use fdatasync to prevent write - behind from giving success
- Add logfile to glupy
- Check aux umount is unmounted for quota tests
- Disable flush behind so that file will be closed

Change-Id: Ia2447176273557738b7a71cc25dd9b9effc16d58
BUG: 1218485
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/10543
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

tests: Check aux umount is unmounted for quota tests

2015-05-05T17:42:18+00:00

Change-Id: If57d08f3446755ea41f66ca258efcc8ea5a89063
BUG: 1218593
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/10480
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur 
Signed-off-by: Sachin Pandit 
Reviewed-on: http://review.gluster.org/10575