glusterfs.git/rpc/xdr/src/glusterd1-xdr.c, branch v4.0.0-2

rpcgen: Remove autogenerated files instead build on demand

2014-04-25T20:29:25+00:00

Avoid modifying autogenerated files and keeping them in
repository - autogenerate them on demand from ".x" files

Change-Id: I2cdb1fe9b99768ceb80a8cb100fa00bd1d8fe2c6
BUG: 1090807
Signed-off-by: Harshavardhana 
Reviewed-on: http://review.gluster.org/7526
Tested-by: Gluster Build System 
Reviewed-by: Niels de Vos 
Reviewed-by: Anand Avati

gluster: GlusterFS Volume Snapshot Feature

2014-04-11T23:29:17+00:00

This is the initial patch for the Snapshot feature. Current patch
includes following features:
* Snapshot create
* Snapshot delete
* Snapshot restore
* Snapshot list
* Snapshot info
* Snapshot status
* Snapshot config

Change-Id: I2f46920c0d61c515f6a60e0f8b46fff886d9f6a9
BUG: 1061685
Signed-off-by: shishir gowda 
Signed-off-by: Sachin Pandit 
Signed-off-by: Vijaikumar M 
Signed-off-by: Raghavendra Bhat 
Signed-off-by: Rajesh Joseph 
Signed-off-by: Joseph Fernandes 
Signed-off-by: Avra Sengupta 
Reviewed-on: http://review.gluster.org/7128
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

glusterd: Volume locks and transaction specific opinfos

2014-02-11T07:25:40+00:00

With this patch we are replacing the existing cluster-wide
lock taken on glusterds across the cluster, with volume locks
which are also taken on glusterds across the cluster, but are
volume specific. So with the volume locks we are able to perform
more than one gluster operation at the same time, as long as the
operations are being performed on different volumes.

We maintain a global list of volume-locks (using a dict for a list)
where the key is the volume name, and which saves the uuid of the
originator glusterd. These locks are held and released per volume
transaction.

In order to acheive multiple gluster operations occuring at the
same time, we also separate opinfos in the op-state-machine, as a
part of this patch. To do so, we generate a unique transaction-id
(uuid) per gluster transaction. An opinfo is then associated with
this transaction id, which is used throughout the transaction. We
maintain a run-time global list(using a dict) of transaction-ids,
and their respective opinfos to achieve this.

Upstream Feature Page: http://www.gluster.org/community/documentation/index.php/Features/glusterd-volume-locks

Change-Id: Iaad505a854bac8de8f83beec0357eb6cde3f7ea8
BUG: 1011470
Signed-off-by: Avra Sengupta 
Reviewed-on: http://review.gluster.org/5994
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

libgfxdr.so: change license

2012-07-20T20:04:10+00:00

Change-Id: I049441e465127195c192443ab0234548d2449e50
Signed-off-by: Amar Tumballi 
Reviewed-on: http://review.gluster.com/3704
Tested-by: Gluster Build System 
Reviewed-by: Bharata B Rao 
Reviewed-by: Kaleb KEITHLEY

glusterd, cli: Enable errstr for peer probe

2012-05-19T02:44:11+00:00

Presently glusterd only returns an errno to cli for peer probe command. This
patch allows glusterd to return an errstr as well to cli. An op_errstr member
has been added to gf1_cli_probe_rsp and gd1_mgmt_probe_rsp structs to allow
this.
In case of an error, cli will display the errstr if it was set. If errstr is not
set cli will display the error message based on errno.
Also, to allow for return of errstr in cases such as handshake failure, an
errstr member has been added to the glusterd_peerctx_t struct.

Change-Id: Iece2b44a7181555e960d9fe4517ec6cda4cdb385
BUG: 816840
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.com/3262
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi 
Reviewed-by: Anand Avati

Second round of warning suppression.

2011-09-29T18:52:30+00:00

Used a #pragma to kill ~170 in rpcgen code.  Added GF_UNUSED to deal with
a few more from macros elsewhere.  The remainder are function return values
(mostly context and dict calls) that really should be checked.  Those would
be harder to fix without real understanding of the code where they occur,
so they remain as reminders.

(Patchset 2: deal with older gcc that doesn't handle #pragma GCC diagnostic)

(Patchset 3: fix include paths in generated files)

(Patchset 4: keep up with trunk, squash 9 new warnings)

(Patchset 5: six more, all in AFR)

Change-Id: I29760c8c81be4d7e6489312c5d0e92cc24814b7b
BUG: 2550
Reviewed-on: http://review.gluster.com/378
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

build: Solaris build fixes

2011-09-27T12:44:41+00:00

Change-Id: Ic47d07a199ecbc42a141e391bbc75096e270e404
BUG: 3446
Reviewed-on: http://review.gluster.com/503
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi

modify to the way we used XDR definitions files (.x files)

2011-09-07T17:48:52+00:00

Earlier:
step 1: copy the existing .x files to /tmp
step 2: generate '.[ch]' files using 'rpcgen .x'
step 3: check diff with the to the existing files, add only your part
        of changes back to the original file. (ignore other changes).
step 4: there is another file to write wrapper functions to convert
        structures to/from XDR buffers, update it with your new structure.
step 5: use these wrapper functions in the newly written procedures.
step 6: commit :-|

Now:
step 1: update (mostly adding only) the .x file
step 2: run '/extras/generate-xdr-files.sh .x' command
step 3: implement rpc procedure to handle the request/response.
step 4: commit :-)

Change-Id: I219f9159fc980438c86e847c6b030be96e595ea2
BUG: 3488
Reviewed-on: http://review.gluster.com/341
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

Change Copyright current year

2011-08-10T17:57:19+00:00

Change-Id: I2d10f2be44f518f496427f257988f1858e888084
BUG: 3348
Reviewed-on: http://review.gluster.com/200
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

LICENSE: s/GNU Affero General Public/GNU General Public/

2011-08-06T13:33:52+00:00

Change-Id: I3914467611e573cccee0d22df93920cf1b2eb79f
BUG: 3348
Reviewed-on: http://review.gluster.com/182
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati