glusterfs.git/rpc/rpc-lib/src, branch v3.10.3

rpc: avoid logging success on failure

2017-05-31T05:57:16+00:00

Avoid logging Success in the event of failure especially when errno
has no meaningful value w.r.t. the failure. In this case the errno 
is set to zero when there's indeed a failure at the RPC level.

mainline:
> BUG: 1426032
> Signed-off-by: Milind Changire 
> Reviewed-on: https://review.gluster.org/16730
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: N Balachandran 
> Reviewed-by: Jeff Darcy 
(cherry picked from commit 89c6bedc1c2e978f67ca29f212a357984cd8a2dd)

Change-Id: If2cc81aa1e590023ed22892dacbef7cac213e591
BUG: 1451995
Signed-off-by: Milind Changire 
Reviewed-on: https://review.gluster.org/17326
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra Talur

rpc: bump up conn->cleanup_gen in rpc_clnt_reconnect_cleanup

2017-03-27T13:58:29+00:00

Commit 086436a introduced generation number (cleanup_gen) to ensure that
rpc layer doesn't end up cleaning up the connection object if
application layer has already destroyed it. Bumping up cleanup_gen was
done only in rpc_clnt_connection_cleanup (). However the same is needed
in rpc_clnt_reconnect_cleanup () too as with out it if the object gets destroyed
through the reconnect event in the application layer, rpc layer will
still end up in trying to delete the object resulting into double free
and crash.

Peer probing an invalid host/IP was the basic test to catch this issue.

>Reviewed-on: https://review.gluster.org/16914
>Smoke: Gluster Build System 
>NetBSD-regression: NetBSD Build System 
>Reviewed-by: Milind Changire 
>CentOS-regression: Gluster Build System 
>Reviewed-by: Jeff Darcy 
>(cherry picked from commit 39e09ad1e0e93f08153688c31433c38529f93716)

Change-Id: Id5332f3239cb324cead34eb51cf73d426733bd46
BUG: 1434399
Signed-off-by: Atin Mukherjee 
Reviewed-on: https://review.gluster.org/16936
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan

rpc/clnt: remove locks while notifying CONNECT/DISCONNECT

2017-03-06T16:20:33+00:00

Locking during notify was introduced as part of commit
aa22f24f5db7659387704998ae01520708869873 [1]. The fix was introduced
to fix out-of-order CONNECT/DISCONNECT events from rpc-clnt to parent
xlators [2]. However as part of handling DISCONNECT protocol/client
does unwind saved frames (with failure) waiting for responses. This
saved_frames_unwind can be a costly operation and hence ideally
shouldn't be included in the critical section of notifylock, as it
unnecessarily delays the reconnection to same brick. Also, its not a
good practise to pass control to other xlators holding a lock as it
can lead to deadlocks. So, this patch removes locking in rpc-clnt
while notifying parent xlators.

To fix [2], two changes are present in this patch:

* notify DISCONNECT before cleaning up rpc connection (same as commit
  a6b63e11b7758cf1bfcb6798, patch [3]).
* protocol/client uses rpc_clnt_cleanup_and_start, which cleans up rpc
  connection and does a start while handling a DISCONNECT event from
  rpc. Note that patch [3] was reverted as rpc_clnt_start called in
  quick_reconnect path of protocol/client didn't invoke connect on
  transport as the connection was not cleaned up _yet_ (as cleanup was
  moved post notification in rpc-clnt). This resulted in clients never
  attempting connect to bricks.

Note that one of the neater ways to fix [2] (without using locks) is
to introduce generation numbers to map CONNECT and DISCONNECTS across
epochs and ignore DISCONNECT events if they don't belong to current
epoch. However, this approach is a bit complex to implement and
requires time. So, current patch is a hacky stop-gap fix till we come
up with a more cleaner solution.

[1] http://review.gluster.org/15916
[2] https://bugzilla.redhat.com/show_bug.cgi?id=1386626
[3] http://review.gluster.org/15681

>Change-Id: I62daeee8bb1430004e28558f6eb133efd4ccf418
>Signed-off-by: Raghavendra G 
>BUG: 1427012
>Reviewed-on: https://review.gluster.org/16784
>Smoke: Gluster Build System 
>Reviewed-by: Milind Changire 
>NetBSD-regression: NetBSD Build System 
>CentOS-regression: Gluster Build System 
(cherry picked from commit 773f32caf190af4ee48818279b6e6d3c9f2ecc79)

Change-Id: I62daeee8bb1430004e28558f6eb133efd4ccf418
Signed-off-by: Raghavendra G 
BUG: 1428670
Reviewed-on: https://review.gluster.org/16835
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan

rpcsvc: Add rpchdr and proghdr to iobref before submitting to transport

2017-02-16T14:46:53+00:00

Backport of https://review.gluster.org/16613

Issue:
When fio is run on multiple clients (each client writes to its own files),
and meanwhile the clients does a readdirp, thus the client which did
a readdirp will now recieve the upcalls. In this scenario the client
disconnects with rpc decode failed error.

RCA:
Upcall calls rpcsvc_request_submit to submit the request to socket:
rpcsvc_request_submit currently:
rpcsvc_request_submit () {
   iobuf = iobuf_new
   iov = iobuf->ptr
   fill iobuf to contain xdrised upcall content - proghdr
   rpcsvc_callback_submit (..iov..)
   ...
   if (iobuf)
       iobuf_unref (iobuf)
}

rpcsvc_callback_submit (... iov...) {
   ...
   iobuf = iobuf_new
   iov1 = iobuf->ptr
   fill iobuf to contain xdrised rpc header - rpchdr
   msg.rpchdr = iov1
   msg.proghdr = iov
   ...
   rpc_transport_submit_request (msg)
   ...
   if (iobuf)
       iobuf_unref (iobuf)
}

rpcsvc_callback_submit assumes that once rpc_transport_submit_request()
returns the msg is written on to socket and thus the buffers(rpchdr, proghdr)
can be freed, which is not the case. In especially high workload,
rpc_transport_submit_request() may not be able to write to socket immediately
and hence adds it to its own queue and returns as successful. Thus, we have
use after free, for rpchdr and proghdr. Hence the clients gets garbage rpchdr
and proghdr and thus fails to decode the rpc, resulting in disconnect.

To prevent this, we need to add the rpchdr and proghdr to a iobref and send
it in msg:
   iobref_add (iobref, iobufs)
   msg.iobref = iobref;
The socket layer takes a ref on msg.iobref, if it cannot write to socket and
is adding to the queue. Thus we do not have use after free.

Thank You for discussing, debugging and fixing along:
Prashanth Pai 
Raghavendra G 
Rajesh Joseph 
Kotresh HR 
Mohammed Rafi KC 
Soumya Koduri 

> Reviewed-on: https://review.gluster.org/16613
> Reviewed-by: Prashanth Pai 
> Smoke: Gluster Build System 
> Reviewed-by: soumya k 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Raghavendra G 

Change-Id: Ifa6bf6f4879141f42b46830a37c1574b21b37275
BUG: 1422363
Signed-off-by: Poornima G 
Reviewed-on: https://review.gluster.org/16623
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
Reviewed-by: Prashanth Pai 
CentOS-regression: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan

glusterd: add a cli command to trigger a statedump on a client

2017-02-14T01:53:10+00:00

With this, we will be able to trigger statedumps on remote Gluster
clients, mainly targetted for applications using libgfapi.

Design:
SIGUSR signal is the most comman way of taking a statedump in Gluster.
But it cannot be used for libgfapi based processes, as the process
loading the library might have already consumed SIGUSR signal. Hence
going by the command way.

One has to issue a Gluster command to initiate a statedump on the
libgfapi based client. The command takes hostname and PID as an
argument. All the glusterds in the cluster, check if they are connected
to the specified hostname, and send an RPC request to all the connected
clients from that hostname (via the mgmt connection).

> URL: http://review.gluster.org/16357
> BUG: 1169302
> Signed-off-by: Poornima G 
> [ndevos: minor fixes and split patch in smaller pieces]
> Reviewed-on-master: https://review.gluster.org/9228
> Reviewed-by: Niels de Vos 
> Tested-by: Niels de Vos 
> Reviewed-by: Kaleb KEITHLEY 
> Reviewed-by: Samikshan Bairagya 

BUG: 1418981
Change-Id: Icbe4d2f026b32a2c7d5535e1bfb2cdaaff042e91
Signed-off-by: Shyam 
Reviewed-on: https://review.gluster.org/16601
Smoke: Gluster Build System 
Reviewed-by: Niels de Vos 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

core: run many bricks within one glusterfsd process

2017-02-02T00:54:58+00:00

This patch adds support for multiple brick translator stacks running in
a single brick server process.  This reduces our per-brick memory usage
by approximately 3x, and our appetite for TCP ports even more.  It also
creates potential to avoid process/thread thrashing, and to improve QoS
by scheduling more carefully across the bricks, but realizing that
potential will require further work.

Multiplexing is controlled by the "cluster.brick-multiplex" global
option.  By default it's off, and bricks are started in separate
processes as before.  If multiplexing is enabled, then *compatible*
bricks (mostly those with the same transport options) will be started in
the same process.

Backport of:
> Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb
> BUG: 1385758
> Reviewed-on: https://review.gluster.org/14763

Change-Id: I4bce9080f6c93d50171823298fdf920258317ee8
BUG: 1418091
Signed-off-by: Jeff Darcy 
Reviewed-on: https://review.gluster.org/16496
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan

tier : Tier as a service

2017-01-17T04:49:47+00:00

tierd is implemented by separating from rebalance process.

The commands affected:

1) Attach tier will trigger this process instead of old one
2) tier start and tier start force will also trigger this process.
3) volume status [tier] will show tier daemon as a process instead
of task and normal tier status and tier detach status works.
4) tier stop implemented.
5) detach tier implemented separately along with new detach tier
status
6) volume tier volname status will work using the changes.
7) volume set works

This patch has separated the tier translator from the legacy
DHT rebalance code. It now sends the RPCs from the CLI
to glusterd separate to the DHT rebalance code.
The daemon is now a service, similar to the snapshot daemon,
and can be viewed using the volume status command.

The code for the validation and commit phase are the same
as the earlier tier validation code in DHT rebalance.

The “brickop” phase has been changed so that the status
command can use this framework.

The service management framework is now used.
DHT rebalance does not use this framework.

This service framework takes care of :

*) spawning the daemon, killing it and other such processes.
*) volume set options , which are written on the volfile.
*) restart and reconfigure functions. Restart is to restart
the daemon at two points
        1)after gluster goes down and comes up.
        2) to stop detach tier.
*) reconfigure is used to make immediate volfile changes.
By doing this, we don’t restart the daemon.
it has the code to rewrite the volfile for topological
changes too (which comes into place during add and remove brick).

With this patch the log, pid, and volfile are separated
and put into respective directories.

Change-Id: I3681d0d66894714b55aa02ca2a30ac000362a399
BUG: 1313838
Signed-off-by: hari gowtham 
Reviewed-on: http://review.gluster.org/13365
Smoke: Gluster Build System 
Tested-by: hari gowtham 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Dan Lambright 
Reviewed-by: Atin Mukherjee

socket: socket disconnect should wait for poller thread exit

2016-12-22T04:49:19+00:00

When SSL is enabled or if "transport.socket.own-thread" option is set
then socket_poller is run as different thread. Currently during
disconnect or PARENT_DOWN scenario we don't wait for this thread
to terminate. PARENT_DOWN will disconnect the socket layer and
cleanup resources used by socket_poller.

Therefore before disconnect we should wait for poller thread to exit.

Change-Id: I71f984b47d260ffd979102f180a99a0bed29f0d6
BUG: 1404181
Signed-off-by: Rajesh Joseph 
Reviewed-on: http://review.gluster.org/16141
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Kaushal M 
Reviewed-by: Raghavendra Talur 
Reviewed-by: Raghavendra G

rpc: fix for race between rpc and protocol/client

2016-12-05T14:09:48+00:00

It is possible that the notification thread which notifies
protocol/client layer about the disconnection is put to sleep
and meanwhile, a fuse thread or a timer thread initiates and
completes reconnection to the brick. The notification thread
is then woken up and protocol/client layer updates its flags
to indicate that network is disconnected. No reconnection is
initiated because reconnection is rpc-lib layer's responsibility
and its flags indicate that connection is connected.

Fix: Serialize connect and disconnect notify

Credit: Raghavendra Talur 
Change-Id: I8ff5d1a3283b47f5c26848a42016a40bc34ffc1d
BUG: 1386626
Signed-off-by: Rajesh Joseph 
Reviewed-on: http://review.gluster.org/15916
Reviewed-by: Raghavendra G 
Smoke: Gluster Build System 
Reviewed-by: Raghavendra Talur 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

cluster/afr: CLI for granular entry heal enablement/disablement

2016-11-28T11:56:33+00:00

When there are already existing non-granular indices created that are
yet to be healed, if granular-entry-heal option is toggled from 'off' to
'on', AFR self-heal whenever it kicks in, will try to look for granular
indices in 'entry-changes'. Because of the absence of name indices,
granular entry healing logic will fail to heal these directories, and
worse yet unset pending extended attributes with the assumption that
are no entries that need heal.

To get around this, a new CLI is introduced which will invoke glfsheal
program to figure whether at the time an attempt is made to enable
granular entry heal, there are pending heals on the volume OR there
are one or more bricks that are down. If either of them is true, the
command will be failed with the appropriate error.

New CLI: gluster volume heal  granular-entry-heal {enable,disable}

Change-Id: I1f4fe8162813b9068e198965d94169fee4adc099
BUG: 1370410
Signed-off-by: Krutika Dhananjay 
Reviewed-on: http://review.gluster.org/15747
Smoke: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee