glusterfs.git/rpc/rpc-lib/src/rpc-transport.h, branch v3.10.6

rpc: avoid logging success on failure

2017-05-31T05:57:16+00:00

Avoid logging Success in the event of failure especially when errno
has no meaningful value w.r.t. the failure. In this case the errno 
is set to zero when there's indeed a failure at the RPC level.

mainline:
> BUG: 1426032
> Signed-off-by: Milind Changire 
> Reviewed-on: https://review.gluster.org/16730
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: N Balachandran 
> Reviewed-by: Jeff Darcy 
(cherry picked from commit 89c6bedc1c2e978f67ca29f212a357984cd8a2dd)

Change-Id: If2cc81aa1e590023ed22892dacbef7cac213e591
BUG: 1451995
Signed-off-by: Milind Changire 
Reviewed-on: https://review.gluster.org/17326
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra Talur

glusterd: add a cli command to trigger a statedump on a client

2017-02-14T01:53:10+00:00

With this, we will be able to trigger statedumps on remote Gluster
clients, mainly targetted for applications using libgfapi.

Design:
SIGUSR signal is the most comman way of taking a statedump in Gluster.
But it cannot be used for libgfapi based processes, as the process
loading the library might have already consumed SIGUSR signal. Hence
going by the command way.

One has to issue a Gluster command to initiate a statedump on the
libgfapi based client. The command takes hostname and PID as an
argument. All the glusterds in the cluster, check if they are connected
to the specified hostname, and send an RPC request to all the connected
clients from that hostname (via the mgmt connection).

> URL: http://review.gluster.org/16357
> BUG: 1169302
> Signed-off-by: Poornima G 
> [ndevos: minor fixes and split patch in smaller pieces]
> Reviewed-on-master: https://review.gluster.org/9228
> Reviewed-by: Niels de Vos 
> Tested-by: Niels de Vos 
> Reviewed-by: Kaleb KEITHLEY 
> Reviewed-by: Samikshan Bairagya 

BUG: 1418981
Change-Id: Icbe4d2f026b32a2c7d5535e1bfb2cdaaff042e91
Signed-off-by: Shyam 
Reviewed-on: https://review.gluster.org/16601
Smoke: Gluster Build System 
Reviewed-by: Niels de Vos 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

socket: socket disconnect should wait for poller thread exit

2016-12-22T04:49:19+00:00

When SSL is enabled or if "transport.socket.own-thread" option is set
then socket_poller is run as different thread. Currently during
disconnect or PARENT_DOWN scenario we don't wait for this thread
to terminate. PARENT_DOWN will disconnect the socket layer and
cleanup resources used by socket_poller.

Therefore before disconnect we should wait for poller thread to exit.

Change-Id: I71f984b47d260ffd979102f180a99a0bed29f0d6
BUG: 1404181
Signed-off-by: Rajesh Joseph 
Reviewed-on: http://review.gluster.org/16141
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Kaushal M 
Reviewed-by: Raghavendra Talur 
Reviewed-by: Raghavendra G

compound fops: Fix file corruption issue

2016-10-24T14:11:08+00:00

1. Address of a local variable @args is copied into state->req
in server3_3_compound (). But even after the function has gone out of
scope, in server_compound_resume () this pointer is accessed and
dereferenced. This patch fixes that.

2. Compound fops, by virtue of NOT having a vector sizer (like the one
writev has), ends up having both the header and the data (in case one of
its member fops is WRITEV) in the same hdr_iobuf. This buffer was not
being preserved through the lifetime of the compound fop, causing it to
be overwritten by a parallel write fop, even when the writev associated
with the currently executing compound fop is yet to hit the desk, thereby
corrupting the file's data. This is fixed by associating the hdr_iobuf with
the iobref so its memory remains valid through the lifetime of the fop.

3. Also fixed a use-after-free bug in protocol/client in compound fops cbk,
missed by Linux but caught by NetBSD.

Finally, big thanks to Pranith Kumar K and Raghavendra Gowdappa for their
help in debugging this file corruption issue.

Change-Id: I6d5c04f400ecb687c9403a17a12683a96c2bf122
BUG: 1378778
Signed-off-by: Krutika Dhananjay 
Reviewed-on: http://review.gluster.org/15654
NetBSD-regression: NetBSD Build System 
Reviewed-by: Raghavendra G 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System

rpc: increase RPC/XID with each callback

2016-09-19T09:32:03+00:00

The RPC/XID for callbacks has been hardcoded to GF_UNIVERSAL_ANSWER. In
Wireshark these RPC-calls are marked as "RPC retransmissions" because of
the repeating RPC/XID. This is most confusing when verifying the
callbacks that the upcall framework sends. There is no way to see the
difference between real retransmissions and new callbacks.

This change was verified by create and removal of files through
different Gluster clients. The RPC/XID is increased on a per connection
(or client) base. The expectations of the RPC protocol are met this way.

Change-Id: I2116bec0e294df4046d168d8bcbba011284cd0b2
BUG: 1377097
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/15524
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra G

server/protocol: option for dynamic authorization of client permissions

2015-10-05T05:31:05+00:00

problem:
assuming gluster volume is already mounted (for gfapi: say client transport
connection has already established), now if somebody change the volume
permissions say *.allow | *.reject for a client, gluster should allow/terminate
the client connection based on the fresh set of volume options immediately,
but in existing scenario neither we have any option to set this behaviour nor
we take any action until and unless we remount the volume manually

solution:
Introduce 'dynamic-auth' option (default: on).
If 'dynamic-auth' is 'on' gluster will perform dynamic authentication to
allow/terminate client transport connection immediately in response to
*.allow | *.reject volume set options, thus if volume permissions have changed
for a particular client (say client is added to auth.reject list), his
transport connection to gluster volume will be terminated immediately.

Change-Id: I6243a6db41bf1e0babbf050a8e4f8620732e00d8
BUG: 1245380
Signed-off-by: Prasanna Kumar Kalever 
Reviewed-on: http://review.gluster.org/12229
Tested-by: NetBSD Build System 
Reviewed-by: Raghavendra G

build: do not #include "config.h" in each file

2015-05-29T12:43:17+00:00

Instead of including config.h in each file, and have the additional
config.h included from the compiler commandline (-include option).

When a .c file tests for a certain #define, and config.h was not
included, incorrect assumtions were made. With this change, it can not
happen again.

BUG: 1222319
Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/10808
Tested-by: Gluster Build System 
Tested-by: NetBSD Build System
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Pranith Kumar Karampuri

socket: use TCP_USER_TIMEOUT to detect client failures quicker

2015-03-17T12:10:17+00:00

Use the network.ping-timeout to set the TCP_USER_TIMEOUT socket option
(see 'man 7 tcp'). The option sets the transport.tcp-user-timeout option
that is handled in the rpc/socket layer on the protocol/server side.
This socket option makes detecting unclean disconnected clients more
reliable.

When the socket gets closed, any locks that the client held are been
released. This makes it possible to reduce the fail-over time for
applications that run on systems that became unreachable due to
a network partition or general system error client-side (kernel panic,
hang, ...).

It is not trivial to create a test-case for this at the moment. We need
a client that unclean disconnects and an other client that tries to take
over the lock from the disconnected client.

URL: http://supercolony.gluster.org/pipermail/gluster-devel/2014-May/040755.html
Change-Id: I5e5f540a49abfb5f398291f1818583a63a5f4bb4
BUG: 1129787
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/8065
Tested-by: Gluster Build System 
Reviewed-by: soumya k 
Reviewed-by: Santosh Pradhan 
Reviewed-by: Kaleb KEITHLEY

rdma: reduce log level from E to W

2015-02-17T14:56:04+00:00

glusterd process, when try to initialize default vol file, will
always through an error if there is no rdma device. Changing the
log levels and log messages to more appropriately.

Change-Id: I75b919581c6738446dd2d5bddb7b7658a91efcf4
BUG: 1188232
Signed-off-by: Mohammed Rafi KC 
Reviewed-on: http://review.gluster.org/9559
Reviewed-by: Raghavendra Talur 
Reviewed-by: Raghavendra G 
Tested-by: Raghavendra G

rdma:vectored write fails for rdma.

2014-12-08T04:37:43+00:00

For rdma write with payload count greater than one
will fail due to insuffient memory to hold the
buffers in rpc transport layer. It was expecting
only one vector in payload, So it can only able
to decode the first iovec from payload, and the
rest will be discarded.

Thnaks to Raghavendra Gowdappa for fixing the
same.

Change-Id: I82a649a34abe6320d6216c8ce73e69d9b5e99326
BUG: 1171142
Signed-off-by: Mohammed Rafi KC 
Reviewed-on: http://review.gluster.org/9247
Tested-by: Gluster Build System 
Reviewed-by: Raghavendra G 
Tested-by: Raghavendra G