glusterfs.git/rpc/rpc-lib/src/protocol-common.h, branch v3.3.0qa38

cli,glusterd: more volume status improvements

2012-03-29T14:47:53+00:00

The major changes are,
* "volume status" now supports getting details of the self-heal daemon processes
for replica volumes. A new cli options "shd", similar to "nfs", has been
introduced for this. "detail", "fd" and "clients" status ops are not supported
for self-heal daemons.
* The default/normal ouput of "volume status" has been enhanced to contain
information about nfs-server and self-heal daemon processes as well. Some tweaks
have been done to the cli output to show appropriate output.

Also, changes have been done to rebalance/remove-brick status, so that hostnames
are displayed instead of uuids.

Change-Id: I3972396dcf72d45e14837fa5f9c7d62410901df8
BUG: 803676
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.com/3016
Tested-by: Gluster Build System 
Reviewed-by: Krishnan Parthasarathi 
Reviewed-by: Vijay Bellur

cli, glusterd, nfs: "volume status|profile|top" for nfs servers

2012-03-14T09:27:42+00:00

Enables usage of volume monitoring operations "volume status", "volume top" and
"volume profile" for nfs servers. These operations can be performed on
nfs-servers  by passing "nfs" as an option in cli. The output is similar to the
normal brick outputs for these commands.

The new syntaxes for the changed commands are as below,
 #gluster volume profile  {start|info|stop} [nfs]
 #gluster volume top  {[open|read|write|opendir|readdir [nfs]]
               |[read-perf|write-perf [nfs|{bs  count }]]}
               [brick ] [list-cnt ]
 #gluster volume status [all |  [nfs|]]
          [detail|clients|mem|inode|fd|callpool]

Change-Id: Ia6eb50c60aecacf9b413d3ea993f4cdd90ec0e07
BUG: 795267
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.com/2820
Tested-by: Gluster Build System 
Reviewed-by: Krishnan Parthasarathi

cluster/afr: Add commands to see self-heald ops

2012-02-21T05:23:37+00:00

Change-Id: Id92d3276e65a6c0fe61ab328b58b3954ae116c74
BUG: 763820
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.com/2775
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

protocol/client,server: fcntl lock self healing.

2012-02-20T12:45:31+00:00

Currently(with out this patch), on a disconnect the server cleans up
the transport which inturn closes the fd's and releases the locks acquired on
those fd's by that client. On a reconnect, client just reopens the fd's but
doesn't reacquire the locks. The application that had previously acquired
the locks still is under the assumption that it is the owner of those locks
which might have been granted to other clients(if they request) by the server
leading to data corruption.

This patch allows the client to reacquire the fcntl locks (held on the fd's)
during client-server handshake.

* The server identifies the client via process-uuid-xl (which is a combination
  of uuid and client-protocol name, it is assumed to be unique) and lk-version
  number.

* The client maintains a list of process-uuid-xl, lk-version pair for each
  accepted connection. On a connect, the server traverses the list for a
  matching pair, if a matching pair is not found the the server returns
  lk-version with value 0, else it returns the lk-version it has in store.

* On a disconnect, the server and client enter grace period, and on the
  completion of the grace period, the client bumps up its lk-version number
  (which means, it will reacquire the locks the next time) and the server will
  distroy the connection. If reconnection happens within the grace period, the
  server will find the matching (process-uuid-xl, lk-version) pair in its list
  which guarantees that the fd's and there corresponding locks are still valid
  for this client.

Configurable options:
  To set grace-timeout, the following options are
    option server.grace-timeout value
    option client.grace-timeout value

  To enable or disable the lk-heal,
    option lk-heal [on|off]

gluster volume set command can be used to configurable options
Change-Id: Id677ef1087b300d649f278b8b2aa0d94eae85ed2
BUG: 795386
Signed-off-by: Mohammed Junaid 
Reviewed-on: http://review.gluster.com/2766
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

cluster/dht: Rebalance will be a new glusterfs process

2012-02-19T09:31:19+00:00

rebalance will not use any maintainance clients. It is replaced by syncops,
with the volfile. Brickop (communication between glusterd<->glusterfs process)
is used for status and stop commands.

Dept-first traversal of dir is maintained, but data is migrated as and when
encounterd.
fix-layout (dir)
do
        Complete migrate-data of dir
        fix-layout (subdir)
done

Rebalance state is saved in the vol file, for restart-ability.
A disconnect event and pidfile state determine the defrag-status

Signed-off-by: shishirng 
Change-Id: Iec6c80c84bbb2142d840242c28db3d5f5be94d01
BUG: 763844
Reviewed-on: http://review.gluster.com/2540
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi

cli, glusterd : Added support for clear-locks command.

2012-02-17T12:50:55+00:00

Change-Id: I8e7cd51d6e3dd968cced1ec4115b6811f2ab5c1b
BUG: 789858
Signed-off-by: Krishnan Parthasarathi 
Reviewed-on: http://review.gluster.com/2552
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

cli: Enable output in XML

2012-02-16T05:45:27+00:00

This patch enables gluster cli to output data in xml format. XML output can be
obtained by passing "--xml" as an argument.

A new "volume list" command, which lists the volumes present in a cluster, has
been added. This can be used for obtaining a quick list of volumes.

Several commands, including "volume top", "volume profile", "volume status" and
"volume info", "volume list", have custom XML output routines. Other commands
use either one of the 2 generic output routines, cli_xml_output_str() &
cli_xml_output_dict().
NOTE: When using "all" for "volume status" and "volume info" the XML output will
have multiple roots.

Change-Id: I6117baa02ec06fda116177dbd401f66521263ac6
BUG: 790713
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.com/2753
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi 
Reviewed-by: Vijay Bellur

cli: Extend "volume status" with statedump info

2012-01-27T12:20:04+00:00

This patch enhances and extends the "volume status" command with information
obtained from the statedump of the bricks of volumes.

Adds new status types : clients, inode, fd, mem, callpool
The new syntax of "volume status" is,
 #gluster volume status [all|{ []
                         [misc-details|clients|inode|fd|mem|callpool]}]

Change-Id: I8d019718465bbc3de727653a839de7238f45da5c
BUG: 765495
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.com/2637
Tested-by: Gluster Build System 
Reviewed-by: Krishnan Parthasarathi

core: add 'fremovexattr()' fop

2012-01-25T10:24:20+00:00

so operations can be done on fd for extended attribute removal

Change-Id: Ie026f1b53793aeb4ae33e96ea5408c7a97f34bf6
Signed-off-by: Amar Tumballi 
BUG: 766571
Reviewed-on: http://review.gluster.com/778
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

trivial: correctly document that GLUSTER_CLI_VERSION=2 matches version 0.0.2

2012-01-13T05:43:54+00:00

Change-Id: I0d7eb0ac67ad83e5f21b60cc2acc514ac602ea42
BUG: 772469
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.com/2604
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi