glusterfs.git/rpc/rpc-lib/src/protocol-common.h, branch release-3.13

heal: New feature heal info summary to list the status of brick and count of entries to be healed

2017-09-15T12:21:36+00:00

Command output:
Brick 192.168.2.8:/brick/1
Status: Connected
Total Number of entries: 363
Number of entries in heal pending: 362
Number of entries in split-brain: 0
Number of entries possibly healing: 1



  
    
      
        192.168.2.8:/brick/1
        Connected
        363
        362
        0
        1
      
    
  
  0
  0
  


Change-Id: I40cb6f77a14131c9e41b292f4901b41a228863d7
BUG: 1261463
Signed-off-by: Mohamed Ashiq Liyazudeen 
Reviewed-on: https://review.gluster.org/12154
Smoke: Gluster Build System 
Tested-by: Karthik U S 
CentOS-regression: Gluster Build System 
Reviewed-by: Ravishankar N 
Reviewed-by: Atin Mukherjee

tier: separation of attach-tier from add-brick

2017-08-01T11:08:04+00:00

PROBLEM: Both attach tier and add brick have the same RPC
and set of code. This becomes a hurdle while tring to implement
add brick on a tiered volume.

FIX: This patch separates the add brick and attach tier
giving them separate RPCs.

Change-Id: Iec57e972be968a9ff00b15b507e56a4f6dc398a2
BUG: 1376326
Signed-off-by: hari gowtham 
Reviewed-on: https://review.gluster.org/15503
Smoke: Gluster Build System 
Tested-by: hari gowtham 
Reviewed-by: Samikshan Bairagya 
CentOS-regression: Gluster Build System

glusterd: Fix removing pmap entry on rpc disconnect

2017-04-28T17:15:30+00:00

Problem:
The following line of code intended to remove pmap entry for the
connection during disconnects:

    pmap_registry_remove (this, 0, NULL, GF_PMAP_PORT_NONE, xprt);

However, no pmap entry will have it's type set to GF_PMAP_PORT_NONE
at any point in time. So a call to pmap_registry_search_by_xprt() in
pmap_registry_remove() will always fail to find a match.

Fix:
Optionally ignore pmap entry's type in pmap_registry_search_by_xprt().

BUG: 1193929
Change-Id: I705f101739ab1647ff52a92820d478354407264a
Signed-off-by: Prashanth Pai 
Reviewed-on: https://review.gluster.org/17129
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

glusterd : Disallow peer detach if snapshot bricks exist on it

2017-04-01T01:53:10+00:00

Problem :
- Deploy gluster on 2 nodes, one brick each, one volume replicated
- Create a snapshot
- Lose one server
- Add a replacement peer and new brick with a new IP address
- replace-brick the missing brick onto the new server
  (wait for replication to finish)
- peer detach the old server
- after doing above steps, glusterd fails to restart.

Solution:
  With the fix detach peer will populate an error : "N2 is part of
  existing snapshots. Remove those snapshots before proceeding".
  While doing so we force user to stay with that peer or to delete
  all snapshots.

Change-Id: I3699afb9b2a5f915768b77f885e783bd9b51818c
BUG: 1322145
Signed-off-by: Gaurav Yadav 
Reviewed-on: https://review.gluster.org/16907
Smoke: Gluster Build System 
Reviewed-by: Atin Mukherjee 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

core: run many bricks within one glusterfsd process

2017-01-31T00:13:58+00:00

This patch adds support for multiple brick translator stacks running
in a single brick server process.  This reduces our per-brick memory usage by
approximately 3x, and our appetite for TCP ports even more.  It also creates
potential to avoid process/thread thrashing, and to improve QoS by scheduling
more carefully across the bricks, but realizing that potential will require
further work.

Multiplexing is controlled by the "cluster.brick-multiplex" global option.  By
default it's off, and bricks are started in separate processes as before.  If
multiplexing is enabled, then *compatible* bricks (mostly those with the same
transport options) will be started in the same process.

Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb
BUG: 1385758
Signed-off-by: Jeff Darcy 
Reviewed-on: https://review.gluster.org/14763
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Vijay Bellur

glusterd: add a cli command to trigger a statedump on a client

2017-01-24T00:13:15+00:00

With this, we will be able to trigger statedumps on remote Gluster
clients, mainly targetted for applications using libgfapi.

Design:
SIGUSR signal is the most comman way of taking a statedump in Gluster.
But it cannot be used for libgfapi based processes, as the process
loading the library might have already consumed SIGUSR signal. Hence
going by the command way.

One has to issue a Gluster command to initiate a statedump on the
libgfapi based client. The command takes hostname and PID as an
argument. All the glusterds in the cluster, check if they are connected
to the specified hostname, and send an RPC request to all the connected
clients from that hostname (via the mgmt connection).

URL: http://review.gluster.org/16357
Change-Id: Icbe4d2f026b32a2c7d5535e1bfb2cdaaff042e91
BUG: 1169302
Signed-off-by: Poornima G 
[ndevos: minor fixes and split patch in smaller pieces]
Reviewed-on: https://review.gluster.org/9228
Reviewed-by: Niels de Vos 
Tested-by: Niels de Vos 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Kaleb KEITHLEY 
CentOS-regression: Gluster Build System 
Reviewed-by: Samikshan Bairagya

tier : Tier as a service

2017-01-17T04:49:47+00:00

tierd is implemented by separating from rebalance process.

The commands affected:

1) Attach tier will trigger this process instead of old one
2) tier start and tier start force will also trigger this process.
3) volume status [tier] will show tier daemon as a process instead
of task and normal tier status and tier detach status works.
4) tier stop implemented.
5) detach tier implemented separately along with new detach tier
status
6) volume tier volname status will work using the changes.
7) volume set works

This patch has separated the tier translator from the legacy
DHT rebalance code. It now sends the RPCs from the CLI
to glusterd separate to the DHT rebalance code.
The daemon is now a service, similar to the snapshot daemon,
and can be viewed using the volume status command.

The code for the validation and commit phase are the same
as the earlier tier validation code in DHT rebalance.

The “brickop” phase has been changed so that the status
command can use this framework.

The service management framework is now used.
DHT rebalance does not use this framework.

This service framework takes care of :

*) spawning the daemon, killing it and other such processes.
*) volume set options , which are written on the volfile.
*) restart and reconfigure functions. Restart is to restart
the daemon at two points
        1)after gluster goes down and comes up.
        2) to stop detach tier.
*) reconfigure is used to make immediate volfile changes.
By doing this, we don’t restart the daemon.
it has the code to rewrite the volfile for topological
changes too (which comes into place during add and remove brick).

With this patch the log, pid, and volfile are separated
and put into respective directories.

Change-Id: I3681d0d66894714b55aa02ca2a30ac000362a399
BUG: 1313838
Signed-off-by: hari gowtham 
Reviewed-on: http://review.gluster.org/13365
Smoke: Gluster Build System 
Tested-by: hari gowtham 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Dan Lambright 
Reviewed-by: Atin Mukherjee

cluster/afr: CLI for granular entry heal enablement/disablement

2016-11-28T11:56:33+00:00

When there are already existing non-granular indices created that are
yet to be healed, if granular-entry-heal option is toggled from 'off' to
'on', AFR self-heal whenever it kicks in, will try to look for granular
indices in 'entry-changes'. Because of the absence of name indices,
granular entry healing logic will fail to heal these directories, and
worse yet unset pending extended attributes with the assumption that
are no entries that need heal.

To get around this, a new CLI is introduced which will invoke glfsheal
program to figure whether at the time an attempt is made to enable
granular entry heal, there are pending heals on the volume OR there
are one or more bricks that are down. If either of them is true, the
command will be failed with the appropriate error.

New CLI: gluster volume heal  granular-entry-heal {enable,disable}

Change-Id: I1f4fe8162813b9068e198965d94169fee4adc099
BUG: 1370410
Signed-off-by: Krutika Dhananjay 
Reviewed-on: http://review.gluster.org/15747
Smoke: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee

glusterd : Introduce reset brick

2016-08-30T02:55:53+00:00

The command basically allows replace brick with src and
dst bricks as same.

Usage:
gluster v reset-brick   start
This command kills the brick to be reset. Once this command is run,
admin can do other manual operations that they need to do,
like configuring some options for the brick. Once this is done,
resetting the brick can be continued with the following options.

gluster v reset-brick    commit {force}

Does the job of resetting the brick. 'force' option should be used
when the brick already contains volinfo id.

Problem: On doing a disk-replacement of a brick in a replicate volume
the following 2 scenarios may occur :

a) there is a chance that reads are served from this replaced-disk brick,
which leads to empty reads. b) potential data loss if next writes succeed
only on replaced brick, and heal is done to other bricks from this one.

Solution: After disk-replacement, make sure that reset-brick command is
run for that brick so that pending markers are set for the brick and it
is not chosen as source for reads and heal. But, as of now replace-brick
for the same brick-path is not allowed. In order to fix the above
mentioned problem, same brick-path replace-brick is needed.
With this patch reset-brick commit {force} will be allowed even when
source and destination  are identical as long as
1) destination brick is not alive
2) source and destination brick have the same brick uuid and path.
Also, the destination brick after replace-brick will use the same port
as the source brick.

Change-Id: I440b9e892ffb781ea4b8563688c3f85c7a7c89de
BUG: 1266876
Signed-off-by: Anuradha Talur 
Reviewed-on: http://review.gluster.org/12250
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Ashish Pandey 
Reviewed-by: Pranith Kumar Karampuri

glusterd/cli: cli to get local state representation from glusterd

2016-08-26T15:23:37+00:00

Currently there is no existing CLI that can be used to get the
local state representation of the cluster as maintained in glusterd
in a readable as well as parseable format.

The CLI added has the following usage:

 # gluster get-state [daemon] [odir ] [file ]

This would dump data points that reflect the local state
representation of the cluster as maintained in glusterd (no other
daemons are supported as of now) to a file inside the specified
output directory. The default output directory and filename is
/var/run/gluster and glusterd_state_ respectively. The
option for specifying the daemon name leaves room to add support for
other daemons in the future. Following are the data points captured
as of now to represent the state from the local glusterd pov:

 * Peer:
    - Primary hostname
    - uuid
    - state
    - connection status
    - List of hostnames

 * Volumes:
    - name, id, transport type, status
    - counts: bricks, snap, subvol, stripe, arbiter, disperse,
 redundancy
    - snapd status
    - quorum status
    - tiering related information
    - rebalance status
    - replace bricks status
    - snapshots

 * Bricks:
    - Path, hostname (for all bricks these info will be shown)
    - port, rdma port, status, mount options, filesystem type and
signed in status for bricks running locally.

 * Services:
    - name, online status for initialised services

 * Others:
    - Base port, last allocated port
    - op-version
    - MYUUID

Change-Id: I4a45cc5407ab92d8afdbbd2098ece851f7e3d618
BUG: 1353156
Signed-off-by: Samikshan Bairagya 
Reviewed-on: http://review.gluster.org/14873
Reviewed-by: Avra Sengupta 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Atin Mukherjee