glusterfs.git/extras/Makefile.am, branch v3.7.7

firewall/spec: Create glusterfs firewall service if firewalld installed.

2015-10-15T22:53:03+00:00

It creates glusterfs firewall service during installation.

glusterfs service : It contains all default ports which needs to be opened.
During installation  glusterfs.xml is copied into firewall service directory(/usr/lib/firewalld/services/).

Note:
1.For bricks: It opens the 512 ports, if brick is running out side this range(>49664) then admin need to open the port
for that brick.
2.By default this service is not enabled in any of zone.

To enable this service(glusterfs) in firewall:

1. Get active zone(s) in node
     firewall-cmd  --get-active-zones

2. Attached this service(glusterfs) to zone(s)
   firewall-cmd  --zone=  --add-service=glusterfs               --To apply runtime
   firewall-cmd  --permanent  --zone=  --add-service=glusterfs  --To apply permanent

Note:
  we can also use firewall-config which gives GUI to configure firewall.

Backport of:
>Change-Id: Id97fe620c560fd10599511d751aed11a99ba4da5
>BUG: 1253967
>Signed-off-by: anand 
>Reviewed-on: http://review.gluster.org/11989
>Reviewed-by: Niels de Vos 
>Tested-by: NetBSD Build System 
>Tested-by: Gluster Build System 
>(cherry picked from commit 7f327d3b4f9222995d2ee78862e48ca44c28411c)

Change-Id: Iacf44b15ffb176c965c7f3b074065a54cf785dc7
BUG: 1057295
Signed-off-by: anand ;
Reviewed-on: http://review.gluster.org/12357
Reviewed-by: Niels de Vos 
Tested-by: NetBSD Build System 
Tested-by: Gluster Build System

build: scripts are not installed with +x bit

2015-07-30T20:09:52+00:00

scripts listed in Makefile.am as foo_DATA, should be foo_SCRIPTS
to in installed +x

backport of
> Change-Id: Ib9b98efcea968c03b574726bdc0d4f76cdfd1dc1
> BUG: 1225018
> http://review.gluster.org/#/c/11806/

Change-Id: Ieed45f37a22a0ebd977a0d586874a31901c415e9
BUG: 1223945
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/11807
Tested-by: NetBSD Build System 
Reviewed-by: Jeff Darcy 
Tested-by: Gluster Build System 
Reviewed-by: Niels de Vos

build: fix compiling on older distributions

2015-06-11T14:29:03+00:00

data-tiering is disabled on RHEL-5 because it depends on a too new
SQLite version.

This change also prevents installing some of files that are used by
geo-replication, which is also not available on RHEL-5. geo-replication
depends on a too recent version of Python.

Due to an older version of OpenSSL, some of the newer functions can not
be used. A fallback to previous functions is done. Unfortunately RHEL-5
does not seem to have TLSv1.2 support, so only older versions can be
used.

Cherry picked from commit 0209b18fd65f9df5ebd0a8764ebf864d0d392998:
> Change-Id: I672264a673f5432358d2e83b17e2a34efd9fd913
> BUG: 1222317
> Signed-off-by: Niels de Vos 
> Reviewed-on: http://review.gluster.org/10803
> Tested-by: NetBSD Build System 
> Tested-by: Gluster Build System 
> Reviewed-by: Kaleb KEITHLEY 
> Reviewed-by: Vijay Bellur 

Also including the changes from http://review.gluster.org/11140:

> build: improve detection of new OpenSSL features
>
> Building on Mac OS X revealed that the current check for
> CRYPTO_THREADID_set_callback() availability in OpenSSL is not correct.
>
> There also does not seem to be a guarantee that TLSv1_2_method() is
> available when TLS1_2_VERSION is #define'd.
>
> Change-Id: I21508065fc181a1c74bee4fd6d23bb5bdf7cea7a
> BUG: 1222317
> Reviewed-on: http://review.gluster.org/11140
> Original-author: Kaleb KEITHLEY 
> Signed-off-by: Niels de Vos 

Change-Id: I672264a673f5432358d2e83b17e2a34efd9fd913
BUG: 1228510
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/11096
Tested-by: Gluster Build System 
Reviewed-by: Atin Mukherjee 
Reviewed-by: Kaleb KEITHLEY

scripts: Added script stop-all-gluster-processes.sh in rpm

2015-05-31T17:03:29+00:00

This script was not included as part of rpm. Fixed now

BUG: 1225331
Change-Id: I5e559b187253cc2f4f8ea7cf8ec56a32802e5ab2
Signed-off-by: Aravinda VK 
Reviewed-on: http://review.gluster.org/10931
Reviewed-by: Kotresh HR 
Reviewed-by: Kaleb KEITHLEY 
Reviewed-on: http://review.gluster.org/11015
Tested-by: Gluster Build System 
Reviewed-by: Venky Shankar 
Tested-by: NetBSD Build System

Fix case mistake for MKDIR_P in Makefiles

2015-04-23T05:31:42+00:00

Some makefiles used $(mkdir_p) instead of the corectly defined $(MKDIR_P).
The former is substituted as an empty string, leading to possible failures
depending of the user shell tolerance. NetBSD's /bin/sh seems to choke
more easily than Linux's /bin/bash, but if the later does not fail, it
does not created the intended directories anyway.

Resubmit after rebase in hope that regression test will have less
spurious failures.

Backport of: I8caed4000f3c91cb3a685453848fb854793945ed

BUG: 1212676
Change-Id: I393ffda8aa24bffce86f7b1f19b999ffa30c3562
Signed-off-by: Emmanuel Dreyfus 
Reviewed-on: http://review.gluster.org/10279
Tested-by: NetBSD Build System
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

snapshot/scheduling: A cron based scheduler for snapshot scheduling

2015-03-19T01:31:54+00:00

GlusterFS volume snapshot provides point-in-time copy
of a GlusterFS volume. Currently, GlusterFS volume
snapshots can be easily scheduled by setting up 
cron jobs on one of the nodes in the GlusterFS
trusted storage pool. This has a single point failure (SPOF),
as scheduled jobs can be missed if the node running the cron
jobs dies.

The solution to the above problems is addressed in this patch.
The snap_scheduler.py helper script expects the user to install
the argparse python module before using it.

Further details for the same are available at:

http://www.gluster.org/community/documentation/index.php/Features/Scheduling_of_Snapshot

Change-Id: I2c357af5b7d3e66f270d20eef50cdeecdcbe15c7
BUG: 1198027
Signed-off-by: Avra Sengupta 
Signed-off-by: Aravinda VK 
Reviewed-on: http://review.gluster.org/9788
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

feature/glusterfind: A tool to find incremental changes

2015-03-18T09:54:25+00:00

Documentation is available in patch:
http://review.gluster.org/#/c/9800/

A tool which helps to get list of modified files or list of all files in
GlusterFS Volume using Changelog or find command.

Usage
=====
glusterfind --help

Create:
-------
glusterfind create --help

The tool creates status file $GLUSTERD_WORKDIR/SESSION/VOLUME/status
and records current timestamp to initiate the session. This timestamp
will be used as start time for next runs.

As part of create also generates ssh key and distributes to all peers.
and enables build.pgfid and changelog using volume set command.

Pre:
----
glusterfind pre --help

This command is used to generate the list of files modified after session
creation time or after last run. To get list of all files/dirs in Volume,
run pre command with `--full` argument.

The tool gets all nodes details using gluster volume info and runs node
agent for each brick in respective nodes via ssh command. Once these node
agents generate the output file, tool copies to local using scp. Merges all
the output files to generate the final output file.

Post:
-----
glusterfind post --help

After consuming the list, this sub command is called to update the session
time based on pre command status file.

List:
-----
glusterfind list --help

To view all the sessions

Delete:
-------
glusterfind delete --help

Delete session.

Known Issues
------------
1. Deleted files will not get listed, since we can't convert GFID to
   Path if file/dir is deleted.
2. Only new name will get listed if Renamed.
3. All hardlinks will get listed.

Change-Id: I82991feb0aea85cb6ec035fddbf80a2b276e86b0
BUG: 1193893
Signed-off-by: Aravinda VK 
Reviewed-on: http://review.gluster.org/9682
Tested-by: Gluster Build System 
Reviewed-by: Venky Shankar 
Reviewed-by: Prashanth Pai 
Reviewed-by: Kotresh HR 
Reviewed-by: Vijay Bellur

NFS-Ganesha: Install scripts, config files, and resource agent scripts

2015-03-17T20:39:44+00:00

Resubmitting after a gerrit bug bungled the merge of
http://review.gluster.org/9621 (was it really a gerrit bug?)

Scripts related to NFS-Ganesha are in extras/ganesha/scripts.
Config files are in extras/ganesha/config.
Resource Agent files are in extras/ganesha/ocf

Files are copied to appropriate locations.

Change-Id: I137169f4d653ee2b7d6df14d41e2babd0ae8d10c
BUG: 1188184
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/9912
Tested-by: Gluster Build System

build: add a tmpfiles.d config file for /run/gluster

2015-01-19T08:55:31+00:00

New distrubutions have a /run directory on a volatile tmpfs filesystem.
This causes /run/gluster to be removed with each reboot. A tmpfiles.d
configuration is used to create the directory on boot.

EL5 and EL-6 do not use /run, current Fedora versions do. By checking
%{_tmpfilesdir} in the .spec, we can identify if the distribution uses
tmpfiles.d.

Change-Id: I231e7d6603d573cb905246558e14a51577c0eb56
BUG: 1182934
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/9458
Tested-by: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Lalatendu Mohanty

build: only install geo-rep scripts when enabled

2014-12-07T14:16:08+00:00

When geo-replication is not enabled, the related scripts should not get
installed. EPEL-5 does not support geo-replication, and the installed
but unpackaged scripts cause rebuilding for .el5 to fail.

BUG: 1169005
Change-Id: I1b6a352b73bd1ed1c5b330f54e26e81aed9a5a4e
Reported-by: Lalatendu Mohanty 
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/9221
Reviewed-by: Humble Devassy Chirammal 
Tested-by: Gluster Build System