glusterfs.git/configure.ac, branch v3.7.20

build: systemd unit should not be marked executable

2016-08-12T21:44:52+00:00

systemd complains about the unit for GlusterD when it is executable:

  Configuration file /usr/lib/systemd/system/glusterd.service is marked executable. Please remove executable permission bits. Proceeding anyway.

The Makefile that installs the unit has some scripted commands. These
are not needed and standard "*dir" and "*DATA" postfixes for variables
can be used instead.

The EXTRA_DIST variable is needed for building the 'make dist' tarball
on systems where there is no systemd. The unit would be missing from the
tarball if it is not explicitly included.

Cherry picked from commit 9f22282795e20fd62b22847b92dffd0cde9cca1b:
> BUG: 1354489
> Change-Id: I5e72ec201036906b9b2458bc8931ccebf9a8c6b4
> Reported-by: Sergej Pupykin 
> Signed-off-by: Niels de Vos 
> Reviewed-on: http://review.gluster.org/14892
> Smoke: Gluster Build System 
> Reviewed-by: Kaleb KEITHLEY 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 

Change-Id: I5e72ec201036906b9b2458bc8931ccebf9a8c6b4
BUG: 1354476
Reported-by: Sergej Pupykin 
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/15116
Smoke: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

configure: Prevent glupy installation outside $prefix

2016-06-29T16:54:46+00:00

glupy was installed in the global path outside the prefix path,
even if --prefix is passed.

./configure --prefix=/usr/local
make install

Expected: ${DESTDIR}${prefix}/lib64/python/site-packages/gluster
Actual: ${DESTDIR}/usr/lib64/python/site-packages/gluster

prefix was not honoured.

With this patch, glupy will be installed inside the prefix path.

Cherry picked from commit 85de0c83392d861ba47c97664ff73fd7f8705a3a:
> BUG: 1335717
> Change-Id: I810dd8d2d6c403540d4b738f5ab54237c7358bf6
> Signed-off-by: Aravinda VK 
> Reviewed-on: http://review.gluster.org/14315
> Smoke: Gluster Build System 
> Reviewed-by: Niels de Vos 
> NetBSD-regression: NetBSD Build System 
> Reviewed-by: Jeff Darcy 
> CentOS-regression: Gluster Build System 

BUG: 1336137
Change-Id: I810dd8d2d6c403540d4b738f5ab54237c7358bf6
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/14340
Smoke: Gluster Build System 
Tested-by: Anoop C S 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Vijay Bellur

build: Filter -D_FORTIFY_SOURCE from CFLAGS

2016-06-29T16:54:02+00:00

We use python-config to get recommended CFLAGS. It provides
-D_FORTIFY_SOURCE=2 by default that conflicts with our
--enable-debug option or a developer provided no-optimization option.
Hence, filter it out from default CFLAGS.

Cherry picked from commit 5e65701f2660d1be101da81bffea7721d4f9ece0:
> Change-Id: Id80196baeb55415b1ea334e7b17143e56dfbadb3
> BUG: 1283948
> Co-authored-by: Kaleb S KEITHLEY 
> Signed-off-by: Raghavendra Talur 
> Reviewed-on: http://review.gluster.org/12707
> Smoke: Gluster Build System 
> CentOS-regression: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> Reviewed-by: Kaleb KEITHLEY 

Change-Id: Id80196baeb55415b1ea334e7b17143e56dfbadb3
BUG: 1336137
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/14339
Smoke: Gluster Build System 
Tested-by: Anoop C S 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY

build: place glupy under $prefix while installing

2016-06-27T20:15:27+00:00

Regression testing on FreeBSD fails due to this error:

  --- install-pyglupyPYTHON ---
   /usr/home/jenkins/root/workspace/freebsd-smoke/install-sh -c -d '/usr/local/lib/python2.7/site-packages/gluster/glupy'
  mkdir: /usr/local/lib/python2.7/site-packages/gluster: Permission denied
  mkdir: /usr/local/lib/python2.7/site-packages/gluster: Permission denied
  *** [install-pyglupyPYTHON] Error code 1

The installation prefix is set to "/build/install" and glupy should be
placed there as well. The default to "/usr/local" is incorrect.

Cherry picked from commit a34c406445fc0294de41a8e4706f106a83e136a0:
> Change-Id: I166412a271576f2344aecec94c7835f0fe9b1cf3
> BUG: 1198849
> Signed-off-by: Niels de Vos 
> Reviewed-on: http://review.gluster.org/13208
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Kaleb KEITHLEY 

Change-Id: I166412a271576f2344aecec94c7835f0fe9b1cf3
BUG: 1336137
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/14338
Smoke: Gluster Build System 
Tested-by: Aravinda VK 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY

geo-rep: Fix gluster binary invocation while running as cron

2016-05-10T11:33:49+00:00

When scheduler script was executed as cron, it was unable to detect
the Gluster binaries.

BUG: 1331924
Change-Id: Ic9c533586ed9a472765f69aa2f87d004c46d4340
Signed-off-by: Aravinda VK 
Reviewed-on: http://review.gluster.org/14111
CentOS-regression: Gluster Build System 
Tested-by: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
Reviewed-by: Vijay Bellur 
(cherry picked from commit 80e3832ec16f69d4184172cfc9afa9e42533e0ef)
Reviewed-on: http://review.gluster.org/14122
Reviewed-by: Kotresh HR

build: fix ecdh.h and dh.h deps

2015-11-20T11:25:29+00:00

openssl/ecdh.h and openssl/dh.h are not available on all platforms,
especially rhel-5.
This patch adds check to autoconf and updates relevant source files.

Added conditional to test for SSL_OP_NO_TICKET and SSL_OP_NO_COMPRESSION
presence before setting the SSL context options.

Macros UTIME_OMIT and UTIME_NOW picked up from Fedora 22
/usr/include/bits/stat.h to help rhel-5 build.

Change-Id: I2bdee4fe643f9c1f5fe77cf89bd30946cd6b591a
Reviewed-on: http://review.gluster.org/#/c/12517/
BUG: 1258594
Signed-off-by: Milind Changire 
Reviewed-on: http://review.gluster.org/12518
Tested-by: NetBSD Build System 
Tested-by: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Niels de Vos

firewall/spec: Create glusterfs firewall service if firewalld installed.

2015-10-15T22:53:03+00:00

It creates glusterfs firewall service during installation.

glusterfs service : It contains all default ports which needs to be opened.
During installation  glusterfs.xml is copied into firewall service directory(/usr/lib/firewalld/services/).

Note:
1.For bricks: It opens the 512 ports, if brick is running out side this range(>49664) then admin need to open the port
for that brick.
2.By default this service is not enabled in any of zone.

To enable this service(glusterfs) in firewall:

1. Get active zone(s) in node
     firewall-cmd  --get-active-zones

2. Attached this service(glusterfs) to zone(s)
   firewall-cmd  --zone=  --add-service=glusterfs               --To apply runtime
   firewall-cmd  --permanent  --zone=  --add-service=glusterfs  --To apply permanent

Note:
  we can also use firewall-config which gives GUI to configure firewall.

Backport of:
>Change-Id: Id97fe620c560fd10599511d751aed11a99ba4da5
>BUG: 1253967
>Signed-off-by: anand 
>Reviewed-on: http://review.gluster.org/11989
>Reviewed-by: Niels de Vos 
>Tested-by: NetBSD Build System 
>Tested-by: Gluster Build System 
>(cherry picked from commit 7f327d3b4f9222995d2ee78862e48ca44c28411c)

Change-Id: Iacf44b15ffb176c965c7f3b074065a54cf785dc7
BUG: 1057295
Signed-off-by: anand ;
Reviewed-on: http://review.gluster.org/12357
Reviewed-by: Niels de Vos 
Tested-by: NetBSD Build System 
Tested-by: Gluster Build System

build: fix compiling on older distributions

2015-06-11T14:29:03+00:00

data-tiering is disabled on RHEL-5 because it depends on a too new
SQLite version.

This change also prevents installing some of files that are used by
geo-replication, which is also not available on RHEL-5. geo-replication
depends on a too recent version of Python.

Due to an older version of OpenSSL, some of the newer functions can not
be used. A fallback to previous functions is done. Unfortunately RHEL-5
does not seem to have TLSv1.2 support, so only older versions can be
used.

Cherry picked from commit 0209b18fd65f9df5ebd0a8764ebf864d0d392998:
> Change-Id: I672264a673f5432358d2e83b17e2a34efd9fd913
> BUG: 1222317
> Signed-off-by: Niels de Vos 
> Reviewed-on: http://review.gluster.org/10803
> Tested-by: NetBSD Build System 
> Tested-by: Gluster Build System 
> Reviewed-by: Kaleb KEITHLEY 
> Reviewed-by: Vijay Bellur 

Also including the changes from http://review.gluster.org/11140:

> build: improve detection of new OpenSSL features
>
> Building on Mac OS X revealed that the current check for
> CRYPTO_THREADID_set_callback() availability in OpenSSL is not correct.
>
> There also does not seem to be a guarantee that TLSv1_2_method() is
> available when TLS1_2_VERSION is #define'd.
>
> Change-Id: I21508065fc181a1c74bee4fd6d23bb5bdf7cea7a
> BUG: 1222317
> Reviewed-on: http://review.gluster.org/11140
> Original-author: Kaleb KEITHLEY 
> Signed-off-by: Niels de Vos 

Change-Id: I672264a673f5432358d2e83b17e2a34efd9fd913
BUG: 1228510
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/11096
Tested-by: Gluster Build System 
Reviewed-by: Atin Mukherjee 
Reviewed-by: Kaleb KEITHLEY

glupy: remove debug test in libpython runtime search path detection

2015-05-09T22:27:52+00:00

A configure test was recently added to add libpython runtime search
path to glupy.so xlator. The vesion committed was a debug test, it
searched pythonxx and not python to check for failure.

Fix by removing the xx debug test in python's name.

Backport of: I7b691be17fc2a2c812f68710869b1a9a85ced84c

Change-Id: I518f369c320dcd5cddbdcfe9d25d27af2e0dc929
Signed-off-by: Emmanuel Dreyfus 
BUG: 1212676
Reviewed-on: http://review.gluster.org/10733
Reviewed-by: Niels de Vos 
Tested-by: NetBSD Build System
Tested-by: Gluster Build System

glupy: fix tuntime search path and python module directory layo

2015-05-08T03:09:10+00:00

ut

1) The glupy.so xlator should embed the runtime search path for
the python libraries. Unfortunately, python-config does not
gives the appprioate flags, therefore we need to also use
pkg-config to obtain them

2) Fix the glupy python module directory layout so that python
can import the module without problem

That two fixes seems to let glupy.t pass on NetBSD again.

Backport of: I397aa726ab8bf7d91fa0d6d870a30910a5f4a5d9

BUG: 1212676
Change-Id: Ie48916d71f0f1a357d65c3c22b5e7d7276d720db
Signed-off-by: Emmanuel Dreyfus 
Reviewed-on: http://review.gluster.org/10650
Reviewed-by: Kaleb KEITHLEY 
Tested-by: Gluster Build System 
Tested-by: NetBSD Build System
Reviewed-by: Vijay Bellur