glusterfs.git/configure.ac, branch v3.6.3

api: versioned symbols in libgfapi.so for compatibility

2015-03-04T07:32:16+00:00

Use versioned symbols to keep libgfapi at libgfapi.so.0.0.0

Revisited to address broken build on Mac OS X

See http://review.gluster.org/9055

Change-Id: I0f26668898749f57b61490b18f1f04c42996225d
BUG: 1165129
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/9145
Reviewed-by: Shyamsundar Ranganathan 
Tested-by: Gluster Build System 
Reviewed-by: Ravishankar N 
Reviewed-by: Raghavendra Bhat

afr : glfs-heal implementation

2015-01-06T10:04:49+00:00

    Backport of http://review.gluster.org/6529
and http://review.gluster.org/9119

Change-Id: Ie420efcb399b5119c61f448b421979c228b27b15
BUG: 1173528
Signed-off-by: Anuradha 
Reviewed-on: http://review.gluster.org/9335
Reviewed-by: Ravishankar N 
Tested-by: Gluster Build System 
Reviewed-by: Raghavendra Bhat

glupy: build fix if python and glusterfs prefix differ

2014-12-13T06:13:00+00:00

If python is installed in ${pythonprefix} and glusterfs
in ${glusterfsprefix}, we have the following values:
${PYTHON}-config --prefix   => ${pythonprefix}
$libdir                     => ${glusterfsprefix}/lib

Using LDFLAGS="-L`${PYTHON}-config --prefix`/$libdir" we lookf for
python libraries in ${pythonprefix}/${glusterfsprefix}/lib while
we should be looking for ${pythonprefix}/lib

Replacing $libdir by lib breaks bug 1159248, so let us look in both
${pythonprefix}/lib and ${pythonprefix}/$libdir

Backport of: I2fef1b795235d1543a0e5ac619c6c2d59127fb66

BUG: 1138897
Change-Id: I29b9f121e1cdc546ca8551ff48cc99f1c71a0ea6
Signed-off-by: Emmanuel Dreyfus 
Reviewed-on: http://review.gluster.org/9214
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur 
Reviewed-by: Raghavendra Bhat 
Tested-by: Raghavendra Bhat

build: only install geo-rep scripts when enabled

2014-12-10T14:00:22+00:00

When geo-replication is not enabled, the related scripts should not get
installed. EPEL-5 does not support geo-replication, and the installed
but unpackaged scripts cause rebuilding for .el5 to fail.

Cherry picked from commit fcdac758ad7b3dda9843f92597a15e4a30a3b746:
> BUG: 1169005
> Change-Id: I1b6a352b73bd1ed1c5b330f54e26e81aed9a5a4e
> Reported-by: Lalatendu Mohanty 
> Signed-off-by: Niels de Vos 
> Reviewed-on: http://review.gluster.org/9221
> Reviewed-by: Humble Devassy Chirammal 
> Tested-by: Gluster Build System 

Change-Id: I1b6a352b73bd1ed1c5b330f54e26e81aed9a5a4e
BUG: 1169004
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/9248
Tested-by: Gluster Build System 
Reviewed-by: Humble Devassy Chirammal 
Reviewed-by: Raghavendra Bhat 
Tested-by: Raghavendra Bhat

pkg-config: make the version in gluster-api.pc backwards compatible

2014-12-03T12:02:23+00:00

Once we released gluster-api.pc with version=4. Since then we undid the
library versioning and replaced it with symbol-versioning. The current
libgfapi.so has version 0, but the symbols have the version from the
main package at the time they were added.

Because other packages (like samba) use the pkg-config version, we can
not drop it, or decrease the version easily. The simplest solution is to
keep the version=4 and add sub-digits for the actual package/symbol
versions. In future, the version in gluster-api.pc will be like 4.3.x.y.

Cherry picked from commit 6ba258d2b7d4520af95ff638e02598e4aa247ec4:
> Change-Id: If359c8de5b847a7e818199a7246636113837da2d
> BUG: 1166232
> Signed-off-by: Niels de Vos 
> Reviewed-on: http://review.gluster.org/9154
> Reviewed-by: Kaleb KEITHLEY 
> Reviewed-by: Lalatendu Mohanty 
> Tested-by: Gluster Build System 

Change-Id: Ifc9777c4af0520f77557bf99d9c7a888552faff0
BUG: 1166293
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/9169
Tested-by: Gluster Build System 
Reviewed-by: Raghavendra Bhat 
Tested-by: Raghavendra Bhat

glupy: portability fixes

2014-11-17T07:06:25+00:00

Fixes portability problems so that NetBSD passes tests/features/glupy.t

- Use python-config to detect python build environment on all systems,
  not just Linux and Darwin.
- Get the site-package directory from python and make sure we install
  glupy.py there, Previously we installed within glusterfs prefix,
  which caused a problem if it was different that python's prefix.
- Set PYTHONPATH for tests so that the detected site-packages is used
  in python's search path. This should be useless, but let us have it
  just in case.
- Pass glupy.so path from glusterfsd to glupy.py through an
  environment variable and use it in CDLL instead of "", as the
  later seems not portable (at least it fails on NetBSD).
- Use gil_init_key pthread_getspecific to avoid deadlocks (that
  code was #ifdef out, perhaps because it was not needed on Linux,
  but it seems to be required for NetBSD.
- Recover the error message from Python and send it to the logs
  to help debugging problems.

Backport of: http://review.gluster.org/8978

This is the same patchset as previously submitted to retrigger regression
tests after a spurious failure.

BUG: 1138897
Change-Id: I1e23ba5cc18f129ee1032f905cb053953b683a81
Signed-off-by: Emmanuel Dreyfus 
Reviewed-on: http://review.gluster.org/8980
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

api: versioned symbols in libgfapi.so for compatibility

2014-11-07T10:17:56+00:00

Use versioned symbols to keep libgfapi at libgfapi.so.0.0.0

Some nits uncovered:

+ there are a couple functions declared that do not have an
  associated definition, e.g. glfs_truncate(), glfs_caller_specific_init()

+ there are seven private/internal functions used by heal/src/glfsheal
  and the gfapi master xlator (glfs-master.c): glfs_loc_touchup(),
  glfs_active_subvol(), and glfs_subvol_done(), glfs_init_done(),
  glfs_resolve_at(), glfs_free_from_ctx(), and glfs_new_from_ctx();
  which are not declared in glfs.h;

+ for this initial pass at versioned symbols, we use the earliest version
  of all public symbols, i.e. those for which there are declarations in
  glfs.h or glfs-handles.h.
  Further investigation as we do backports to 3.6, 3.4, and 3.4
  will be required to determine if older implementations need to
  be preserved (forward ported) and their associated alias(es) and
  symbol version(s) defined.

FWIW, we should consider linking all of our libraries with a map, it'll
result in a cleaner ABI. Perhaps something for an intern to do or a
Google Summer of Code project.

Change-Id: Ie3323e62bb125a3b26214153278b4e998804de0e
BUG: 1160710
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/9055
Tested-by: Gluster Build System 
Reviewed-by: Niels de Vos 
Tested-by: Niels de Vos 
Reviewed-by: Vijay Bellur

Do not hardcode umount(8) path, emulate lazy umount

2014-10-03T15:01:29+00:00

1) Use a system-dependent macro for umount(8) location instead of
relying on $PATH  to find it, for security and portability sake.

2) Introduce gf_umount_lazy() to replace umount -l (-l for lazy) invocations,
which is only supported on Linux; On Linux behavior in unchanged. On other
systems, we fork an external process (umountd) that will take care of
periodically attempt to unmount, and optionally rmdir.

Backport of Ia91167c0652f8ddab85136324b08f87c5ac1edd51d

BUG: 1138897
Change-Id: I9d82c87e85af0dee79f2de39bc697c486b7103c8
Signed-off-by: Emmanuel Dreyfus 
Reviewed-on: http://review.gluster.org/8863
Tested-by: Gluster Build System 
Reviewed-by: Csaba Henk 
Reviewed-by: Vijay Bellur

Search zlib without pkg-config

2014-09-08T06:16:11+00:00

NetBSD has zlib installed in base system and no .pc file for it. In
order to discover it, fallback to AC_CHECK_LIB is PKG_CHECK_MODULES
fail to find it.

This is a backport of Ide84402aa38edc2709d12e2530401c6b8c722529
and I34ded175f056d1a0898804fe602e3d2d2cba27f5

BUG: 1138897
Change-Id: I14a3ab987cf2bedd3d1d00145466647fb646795b
Signed-off-by: Emmanuel Dreyfus 
Reviewed-on: http://review.gluster.org/8628
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

build: make GLUSTERD_WORKDIR rely on localstatedir

2014-09-03T18:01:45+00:00

Backport from master branch - http://review.gluster.org/#/c/8246/

- Break-way from '/var/lib/glusterd' hard-coded previously,
  instead rely on 'configure' value from 'localstatedir'
- Provide 's/lib/db' as default working directory for gluster
  management daemon for BSD and Darwin based installations
- loff_t is really off_t on Darwin
- fix-off the warnings generated by clang on FreeBSD/Darwin
- Now 'tests/*' use GLUSTERD_WORKDIR a common variable for all
  platforms.
- Define proper environment for running tests, define correct PATH
  and LD_LIBRARY_PATH when running tests, so that the desired version
  of glusterfs is used, regardless where it is installed.
  (Thanks to manu@netbsd.org for this additional work)

Change-Id: I06e684ac4c26d1e74c9daf76753403ad15f79276
BUG: 1130308
Signed-off-by: Harshavardhana 
Reviewed-on: http://review.gluster.org/8486
Tested-by: Gluster Build System