glusterfs.git/cli/src, branch release-3.11

event/epoll: Add back socket for polling of events immediately after reading the entire rpc message from the wire

2017-06-05T13:37:33+00:00

Currently socket is added back for future events after higher layers
(rpc, xlators etc) have processed the message. If message processing
involves signficant delay (as in writev replies processed by Erasure
Coding), performance takes hit. Hence this patch modifies
transport/socket to add back the socket for polling of events
immediately after reading the entire rpc message, but before
notification to higher layers.

credits: Thanks to "Kotresh Hiremath Ravishankar"
          for assitance in fixing a regression in
         bitrot caused by this patch.

>Reviewed-on: https://review.gluster.org/15036
>CentOS-regression: Gluster Build System 
>NetBSD-regression: NetBSD Build System 
>Smoke: Gluster Build System 
>Reviewed-by: Amar Tumballi 

Change-Id: I04b6b9d0b51a1cfb86ecac3c3d87a5f388cf5800
BUG: 1456259
Signed-off-by: Raghavendra G 
Reviewed-on: https://review.gluster.org/17391
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Smoke: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan

dht:Spacing issue in fix-layout o/p

2017-05-25T21:16:20+00:00

There is a spacing issue in the status output of
the rebalance fix-layout operations. If the local
host name is big then we will have spacing issue.
This is the backport of below given ID.

> Bug 1437748
> Reviewed-on: https://review.gluster.org/17203
> Smoke: Gluster Build System 
> Tested-by: ankitraj 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
>Reviewed-by: Jeff Darcy 

Change-Id: I2fcc4fd382723fb7e93cb4d4dad03dae682cc1a8
BUG: 1452000
Signed-off-by: AnkitRaj 
Reviewed-on: https://review.gluster.org/17327
Tested-by: ankitraj
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan 
Tested-by: Shyamsundar Ranganathan 
CentOS-regression: Gluster Build System

Fixes quota aux mount failure

2017-05-17T23:26:20+00:00

The aux mount is created on the first limit/remove_limit/list command
and it remains until volume is stopped / deleted / (quota is disabled)
, where we do a lazy unmount. If the process is uncleanly terminated,
then the mount entry remains and we get (Transport disconnected) error
on subsequent attempts to run quota list/limit-usage/remove commands.

Second issue, There is also a risk of inadvertent rm -rf on the
/var/run/gluster causing data loss for the user. Ideally, /var/run is
a temp path for application use and should not cause any data loss to
persistent storage.

Solution:
1) unmount the aux mount after each use.
2) clean stale mount before mounting, if any.

One caveat with doing mount/unmount on each command is that we cannot
use same mount point for both list and limit commands.
The reason for this is that list command needs mount to be accessible
in cli after response from glusterd, So it could be unmounted by a
limit command if executed in parallel (had we used same mount point)
Hence we use separate mount points for list and limit commands.

>Reviewed-on: https://review.gluster.org/16938
>NetBSD-regression: NetBSD Build System 
>Smoke: Gluster Build System 
>Reviewed-by: Manikandan Selvaganesh 
>CentOS-regression: Gluster Build System 
>Reviewed-by: Raghavendra G 
>Reviewed-by: Atin Mukherjee 
>(cherry picked from commit 2ae4b4058691b324535d802f4e6d24cce89a10e5)

Change-Id: I4f9e39da2ac2b65941399bffb6440db8a6ba59d0
BUG: 1449775
Signed-off-by: Sanoj Unnikrishnan 
Reviewed-on: https://review.gluster.org/17240
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee

Tier/cli: detach status xml output

2017-05-17T13:51:24+00:00

Problem: detach status xml output was broken because
of the wrong argument. The status_op sent to verify
whether it is a tier status command was as false.

Fix: the argument being passed was changed from false
to true.

>Change-Id: I8cdd4dd972d6bfbb61c1182cbf4097767f83c7c5
>BUG: 1446362
>Signed-off-by: hari gowtham 
>Reviewed-on: https://review.gluster.org/17131
>Smoke: Gluster Build System 
>Tested-by: hari gowtham 
>NetBSD-regression: NetBSD Build System 
>CentOS-regression: Gluster Build System 
>Reviewed-by: Atin Mukherjee 
>Reviewed-by: N Balachandran 

Change-Id: I8cdd4dd972d6bfbb61c1182cbf4097767f83c7c5
BUG: 1451591
Signed-off-by: hari gowtham 
Reviewed-on: https://review.gluster.org/17315
Smoke: Gluster Build System 
Tested-by: hari gowtham 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan

glusterd: Make reset-brick work correctly if brick-mux is on

2017-05-16T00:29:48+00:00

Reset brick currently kills of the corresponding brick process.
However, with brick multiplexing enabled, stopping the brick
process would render all bricks attached to it unavailable. To
handle this correctly, we need to make sure that the brick process
is terminated only if brick-multiplexing is disabled. Otherwise,
we should send the GLUSTERD_BRICK_TERMINATE rpc to the respective
brick process to detach the brick that is to be reset.

> Reviewed-on: https://review.gluster.org/17128
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Atin Mukherjee 

(cherry picked from commit 74383e3ec6f8244b3de9bf14016452498c1ddcf0)

Change-Id: I69002d66ffe6ec36ef48af09b66c522c6d35ac58
BUG: 1449933
Signed-off-by: Samikshan Bairagya 
Reviewed-on: https://review.gluster.org/17245
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee

Halo Replication feature for AFR translator

2017-05-08T05:37:07+00:00

	Backport of https://review.gluster.org/16177
		    https://review.gluster.org/17174

Merged both these patches to make sure IPV6 changes don't make it to 3.11 at all.

Summary:
Halo Geo-replication is a feature which allows Gluster or NFS clients to write
locally to their region (as defined by a latency "halo" or threshold if you
like), and have their writes asynchronously propagate from their origin to the
rest of the cluster.  Clients can also write synchronously to the cluster
simply by specifying a halo-latency which is very large (e.g. 10seconds) which
will include all bricks.

In other words, it allows clients to decide at mount time if they desire
synchronous or asynchronous IO into a cluster and the cluster can support both
of these modes to any number of clients simultaneously.

There are a few new volume options due to this feature:
  halo-shd-latency:  The threshold below which self-heal daemons will
  consider children (bricks) connected.

  halo-nfsd-latency: The threshold below which NFS daemons will consider
  children (bricks) connected.

  halo-latency: The threshold below which all other clients will
  consider children (bricks) connected.

  halo-min-replicas: The minimum number of replicas which are to
  be enforced regardless of latency specified in the above 3 options.
  If the number of children falls below this threshold the next
  best (chosen by latency) shall be swapped in.

New FUSE mount options:
  halo-latency & halo-min-replicas: As descripted above.

This feature combined with multi-threaded SHD support (D1271745) results in
some pretty cool geo-replication possibilities.

Operational Notes:
- Global consistency is gaurenteed for synchronous clients, this is provided by
  the existing entry-locking mechanism.
- Asynchronous clients on the other hand and merely consistent to their region.
  Writes & deletes will be protected via entry-locks as usual preventing
  concurrent writes into files which are undergoing replication.  Read operations
  on the other hand should never block.
- Writes are allowed from _any_ region and propagated from the origin to all
  other regions.  The take away from this is care should be taken to ensure
  multiple writers do not write the same files resulting in a gfid split-brain
  which will require resolution via split-brain policies (majority, mtime &
  size).  Recommended method for preventing this is using the nfs-auth feature to
  define which region for each share has RW permissions, tiers not in the origin
  region should have RO perms.

TODO:
- Synchronous clients (including the SHD) should choose clients from their own
  region as preferred sources for reads.  Most of the plumbing is in place for
  this via the child_latency array.
- Better GFID split brain handling & better dent type split brain handling
  (i.e. create a trash can and move the offending files into it).
- Tagging in addition to latency as a means of defining which children you wish
  to synchronously write to

Test Plan:
- The usual suspects, clang, gcc w/ address sanitizer & valgrind
- Prove tests

Reviewers: jackl, dph, cjh, meyering

Reviewed By: meyering

Subscribers: ethanr

Differential Revision: https://phabricator.fb.com/D1272053

Tasks: 4117827

 >Change-Id: I694a9ab429722da538da171ec528406e77b5e6d1
 >BUG: 1428061
 >Signed-off-by: Kevin Vigor 
 >Reviewed-on: http://review.gluster.org/16099
 >Reviewed-on: https://review.gluster.org/16177
 >Tested-by: Pranith Kumar Karampuri 
 >Smoke: Gluster Build System 
 >NetBSD-regression: NetBSD Build System 
 >CentOS-regression: Gluster Build System 
 >Reviewed-by: Pranith Kumar Karampuri 

BUG: 1448416
Change-Id: I694a9ab429722da538da171ec528406e77b5e6d1
Signed-off-by: Pranith Kumar K 
Reviewed-on: https://review.gluster.org/17192
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Kaushal M

cli: Adding warning message while creating a replica 2 volume

2017-04-25T15:21:59+00:00

Warn the CLI about ending up in split-brain situation with a
replica 2 volume. Display arbiter and replica 3 are recommended
option to avoid this and point to the document on split-brain
and ways to deal with it.

Change-Id: I7f31f3c74818d440a684b3130bc5ccdc72258f01
BUG: 1431963
Signed-off-by: karthik-us 
Reviewed-on: https://review.gluster.org/16899
Reviewed-by: Pranith Kumar Karampuri 
Tested-by: Pranith Kumar Karampuri 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

glusterd: Add client details to get-state output

2017-04-13T03:43:08+00:00

This commit optionally adds client details corresponding to the
locally running bricks to the get-state output. Since getting
the client details involves sending RPC requests to the respective
local bricks, this is a relatively more costly operation. These
client details would be added to the get-state output only if the
get-state command is invoked with the 'detail' option.

This commit therefore also changes the get-state CLI usage. The
modified usage is as follows:

 # gluster get-state [] [[odir ] \
[file ]] [detail]

Change-Id: I42cd4ef160f9e96d55a08a10d32c8ba44e4cd3d8
BUG: 1431183
Signed-off-by: Samikshan Bairagya 
Reviewed-on: https://review.gluster.org/17003
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee

DHT: Spacing issue in fix-layout status output

2017-04-11T04:33:06+00:00

There is a spacing issue in the status output of the rebalance 
fix-layout operations. If the local host name is big then we will
have spacing issue.
To fix this we need to increase the space for node column.

Change-Id: Ic22e8017b55b05680db851a81f9b43c20489db79
BUG: 1437748
Signed-off-by: ankit 
Signed-off-by: AnkitRaj 
Reviewed-on: https://review.gluster.org/16972
Tested-by: ankitraj
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
Reviewed-by: N Balachandran 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra G

build: miscellaneous spelling fixes

2017-04-03T00:26:59+00:00

Debian builds detected spelling issues with GlusterFS 3.10.1. Instead of
carrying the patch in the Debian sources, let's include the fixes here
too.

Change-Id: I38db6adf142f7ec247bffd47aa1e6ff1a0c49e00
Reported-by: Patrick Matthäi 
BUG: 1437853
Signed-off-by: Niels de Vos 
Reviewed-on: https://review.gluster.org/16973
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Smoke: Gluster Build System 
Reviewed-by: Raghavendra G