summaryrefslogtreecommitdiffstats
path: root/rpc
Commit message (Collapse)AuthorAgeFilesLines
* gNFS: Support wildcard in RPC auth allow/rejectSantosh Kumar Pradhan2014-04-221-2/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RFE: Support wildcard in "nfs.rpc-auth-allow" and "nfs.rpc-auth-reject". e.g. *.redhat.com 192.168.1[1-5].* 192.168.1[1-5].*, *.redhat.com, 192.168.21.9 Along with wildcard, support for subnetwork or IP range e.g. 192.168.10.23/24 The option will be validated for following categories: 1) Anonymous i.e. "*" 2) Wildcard pattern i.e. string containing any ('*', '?', '[') 3) IPv4 address 4) IPv6 address 5) FQDN 6) subnetwork or IPv4 range Currently this does not support IPv6 subnetwork. Change-Id: Iac8caf5e490c8174d61111dad47fd547d4f67bf4 BUG: 1086097 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/7485 Reviewed-by: Poornima G <pgurusid@redhat.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rdma: correct some spelling mistakesNiels de Vos2014-04-171-4/+4
| | | | | | | | | | Change-Id: Ib7018aa8a79d36ab942516457a79039cb3e67355 BUG: 1088849 Reported-by: Patrick Matthäi <pmatthaei@debian.org> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/7498 Reviewed-by: Vikhyat Umrao <vumrao@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* gluster: GlusterFS Volume Snapshot FeatureAvra Sengupta2014-04-117-26/+637
| | | | | | | | | | | | | | | | | | | | | | | | | This is the initial patch for the Snapshot feature. Current patch includes following features: * Snapshot create * Snapshot delete * Snapshot restore * Snapshot list * Snapshot info * Snapshot status * Snapshot config Change-Id: I2f46920c0d61c515f6a60e0f8b46fff886d9f6a9 BUG: 1061685 Signed-off-by: shishir gowda <sgowda@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Signed-off-by: Vijaikumar M <vmallika@redhat.com> Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/7128 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpc: warn and truncate grouplist if RPC/AUTH can not hold everythingNiels de Vos2014-04-083-8/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GlusterFS protocol currently uses AUTH_GLUSTERFS_V2 in the RPC/AUTH header. This header contains the uid, gid and auxiliary groups of the user/process that accesses the Gluster Volume. The AUTH_GLUSTERFS_V2 structure allows up to 65535 auxiliary groups to be passed on. Unfortunately, the RPC/AUTH header is limited to 400 bytes by the RPC specification: http://tools.ietf.org/html/rfc5531#section-8.2 In order to not cause complete failures on the client-side when trying to encode a AUTH_GLUSTERFS_V2 that would result in more than 400 bytes, we can calculate the expected size of the other elements: 1 | pid 1 | uid 1 | gid 1 | groups_len XX | groups_val (GF_MAX_AUX_GROUPS=65535) 1 | lk_owner_len YY | lk_owner_val (GF_MAX_LOCK_OWNER_LEN=1024) ----+------------------------------------------- 5 | total xdr-units one XDR-unit is defined as BYTES_PER_XDR_UNIT = 4 bytes MAX_AUTH_BYTES = 400 is the maximum, this is 100 xdr-units. XX + YY can be 95 to fill the 100 xdr-units. Note that the on-wire protocol has tighter requirements than the internal structures. It is possible for xlators to use more groups and a bigger lk_owner than that can be sent by a GlusterFS-client. This change prevents overflows when allocating the RPC/AUTH header. Two new macros are introduced to calculate the number of groups that fit in the RPC/AUTH header, when taking the size of the lk_owner in account. In case the list of groups exceeds the maximum possible, only the first groups are passed over the RPC/GlusterFS protocol to the bricks. A warning is added to the logs, so that most system administrators will get informed. The reducing of the number of groups is not a new inventions. The RPC/AUTH header (AUTH_SYS or AUTH_UNIX) that NFS uses has a limit of 16 groups. Most, if not all, NFS-clients will reduce any bigger number of groups to 16. (nfs.server-aux-gids can be used to workaround the limit of 16 groups, but the Gluster NFS-server will be limited to a maximum of 93 groups, or fewer in case the lk_owner structure contains more items.) Change-Id: I8410e59d0fd246d601b54b961d3ae9cb5a858c10 BUG: 1053579 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/7202 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-by: Santosh Pradhan <spradhan@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* log: enhance gluster log format with message ID and standardize errno reportingShyamsundarR2014-03-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently there are quite a slew of logs in Gluster that do not lend themselves to trivial analysis by various tools that help collect and monitor logs, due to the textual nature of the logs. This FEAT is to make this better by giving logs message IDs so that the tools do not have to do complex log parsing to break it down to problem areas and suggest troubleshooting options. With this patch, a new set of logging APIs are introduced that take additionally a message ID and an error number, so as to print the message ID and the descriptive string for the error. New APIs: - gf_msg, gf_msg_debug/trace, gf_msg_nomem, gf_msg_callingfn These APIs follow the functionality of the previous gf_log* counterparts, and hence are 1:1 replacements, with the delta that, gf_msg, gf_msg_callingfn take additional parameters as specified above. Defining the log messages: Each invocation of gf_msg/gf_msg_callingfn, should provide an ID and an errnum (if available). Towards this, a common message id file is provided, which contains defines to various messages and their respective strings. As other messages are changed to the new infrastructure APIs, it is intended that this file is edited to add these messages as well. Framework enhanced: The logging framework is also enhanced to be able to support different logging backends in the future. Hence new configuration options for logging framework and logging formats are introduced. Backward compatibility: Currently the framework supports logging in the traditional format, with the inclusion of an error string based on the errnum passed in. Hence the shift to these new APIs would retain the log file names, locations, and format with the exception of an additional error string where applicable. Testing done: Tested the new APIs with different messages in normal code paths Tested with configurations set to gluster logs (syslog pending) Tested nomem variants, inducing the message in normal code paths Tested ident generation for normal code paths (other paths pending) Tested with sample gfapi program for gfapi messages Test code is stripped from the commit Pending work (not to be addressed in this patch (future)): - Logging framework should be configurable - Logging format should be configurable - Once all messages move to the new APIs deprecate/delete older APIs to prevent misuse/abuse using the same - Repeated log messages should be suppressed (as a configurable option) - Logging framework assumes that only one init is possible, but there is no protection around the same (in existing code) - gf_log_fini is not invoked anywhere and does very little cleanup (in existing code) - DOxygen comments to message id headers for each message Change-Id: Ia043fda99a1c6cf7817517ef9e279bfcf35dcc24 BUG: 1075611 Signed-off-by: ShyamsundarR <srangana@redhat.com> Reviewed-on: http://review.gluster.org/6547 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpc: transport may be destroyed while rpc isn'tKrishnan Parthasarathi2014-03-052-60/+102
| | | | | | | | | | | | | | | | rpc_clnt object is destroyed after the corresponding transport object is destroyed. But rpc_clnt_reconnect, a timer driven function, refers to the transport object beyond its 'life'. Instead, using the embedded connection object prevents use after free problem wrt transport object. Also, access transport object under conn->lock. Change-Id: Iae28e8a657d02689963c510114ad7cb7e6764e62 BUG: 962619 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/6751 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* socket: don't send notification 'up' on socket_writev failureKrishnan Parthasarathi2014-02-271-1/+2
| | | | | | | | Change-Id: If4e4b95fe025a412f25313d83c780046dfec5116 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/6716 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* rpc/socket: Avoid excessive INFO logs when SSL is not configured.Vijay Bellur2014-02-201-2/+4
| | | | | | | | | Change-Id: I7f4dd2ae4225c8d3783417d0c3d415178f04c0da BUG: 1067011 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/7031 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rpc: Fix a crash due to NULL dereferenceVijay Bellur2014-02-161-2/+2
| | | | | | | | | Change-Id: Ib2bf6dd564fb7e754d5441c96715b65ad2e21441 BUG: 1065611 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/7007 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Clean up some weirdness with the gf_resolve inet definesJustin Clift2014-02-131-7/+0
| | | | | | | | Change-Id: I6bf6101aa0b5d6624891a8ebed2ac1fec2e11e1c Reviewed-on: http://review.gluster.org/6948 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd: Fix possible leaks on failure code pathSantosh Kumar Pradhan2014-02-121-1/+14
| | | | | | | | | | | | | | | Fix the memory leaks in socket and glusterd in failure code paths reported by Coverity. CIDs: 1124777, 1124781, 124782 Change-Id: I63472c6b5900f308f19e64fc93bf7ed2f7b06ade BUG: 789278 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6954 Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/server: do not do root-squashing for trusted clientsRaghavendra Bhat2014-02-102-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * As of now clients mounting within the storage pool using that machine's ip/hostname are trusted clients (i.e clients local to the glusterd). * Be careful when the request itself comes in as nfsnobody (ex: posix tests). So move the squashing part to protocol/server when it creates a new frame for the request, instead of auth part of rpc layer. * For nfs servers do root-squashing without checking if it is trusted client, as all the nfs servers would be running within the storage pool, hence will be trusted clients for the bricks. * Provide one more option for mounting which actually says root-squash should/should not happen. This value is given priority only for the trusted clients. For non trusted clients, the volume option takes the priority. But for trusted clients if root-squash should not happen, then they have to be mounted with root-squash=no option. (This is done because by default blocking root-squashing for the trusted clients will cause problems for smb and UFO clients for which the requests have to be squashed if the option is enabled). * For geo-replication and defrag clients do not do root-squashing. * Introduce a new option in open-behind for doing read after successful open. Change-Id: I8a8359840313dffc34824f3ea80a9c48375067f0 BUG: 954057 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/4863 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Volume locks and transaction specific opinfosAvra Sengupta2014-02-104-0/+170
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this patch we are replacing the existing cluster-wide lock taken on glusterds across the cluster, with volume locks which are also taken on glusterds across the cluster, but are volume specific. So with the volume locks we are able to perform more than one gluster operation at the same time, as long as the operations are being performed on different volumes. We maintain a global list of volume-locks (using a dict for a list) where the key is the volume name, and which saves the uuid of the originator glusterd. These locks are held and released per volume transaction. In order to acheive multiple gluster operations occuring at the same time, we also separate opinfos in the op-state-machine, as a part of this patch. To do so, we generate a unique transaction-id (uuid) per gluster transaction. An opinfo is then associated with this transaction id, which is used throughout the transaction. We maintain a run-time global list(using a dict) of transaction-ids, and their respective opinfos to achieve this. Upstream Feature Page: http://www.gluster.org/community/documentation/index.php/Features/glusterd-volume-locks Change-Id: Iaad505a854bac8de8f83beec0357eb6cde3f7ea8 BUG: 1011470 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/5994 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* mgmt/glusterd: make sure quota enforcer has established connection with ↵Raghavendra G2014-01-251-0/+28
| | | | | | | | | | | | | | | | | quotad before marking quota as enabled. without this patch there is a window of time when quota is marked as enabled in quota-enforcer, but connection to quotad wouldn't have been established. Any checklimit done during this period can result in a failed fop because of unavailability of quotad. Change-Id: I0d509fabc434dd55ce9ec59157123524197fcc80 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> BUG: 969461 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6572 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli: Add options to the CLI that let the user control the reset ofDawit Alemu2014-01-243-3/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | stats "volume profile info" automatically clears incremental stats. There isn't a command to: - fetch stats without clearing incremental stats and - clear cumulative and incremental stats This change introduces two arguments (i.e. peek and clear). 'clear' will wipe both incremental and cumulative stats. 'peek' fetches stats without wiping incremental stats. 'volume profile info peek' - fetches incremental and cumulative stats without wiping incremental stats 'volume profile info incremental peek' - fetches incremental stats without wiping incremental stats 'volume profile info clear' - clears both incremental and cumultiave stats Change-Id: I91834515ad672eca5f882809941147d7d997c4c9 BUG: 1047416 Signed-off-by: Dawit Alemu <dalemu@redhat.com> Reviewed-on: http://review.gluster.org/6620 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpc: use GF_FREE when a string is gf_strdup'd.Krishnan Parthasarathi2014-01-221-1/+1
| | | | | | | | Change-Id: I522c30a600e712be9cc09393104e228e4d8e13f5 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/6752 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: Start using library versioning for various librariesHarshavardhana2014-01-182-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to libtool three individual numbers stand for CURRENT:REVISION:AGE, or C:R:A for short. The libtool script typically tacks these three numbers onto the end of the name of the .so file it creates. The formula for calculating the file numbers on Linux and Solaris is /path/to/library/<library_name>.(C - A).(A).(R) As you release new versions of your library, you will update the library's C:R:A. Although the rules for changing these version numbers can quickly become confusing, a few simple tips should help keep you on track. The libtool documentation goes into greater depth. In essence, every time you make a change to the library and release it, the C:R:A should change. A new library should start with 0:0:0. Each time you change the public interface (i.e., your installed header files), you should increment the CURRENT number. This is called your interface number. The main use of this interface number is to tag successive revisions of your API. The AGE number is how many consecutive versions of the API the current implementation supports. Thus if the CURRENT library API is the sixth published version of the interface and it is also binary compatible with the fourth and fifth versions (i.e., the last two), the C:R:A might be 6:0:2. When you break binary compatibility, you need to set AGE to 0 and of course increment CURRENT. The REVISION marks a change in the source code of the library that doesn't affect the interface-for example, a minor bug fix. Anytime you increment CURRENT, you should set REVISION back to 0. Change-Id: Id72e74c1642c804fea6f93ec109135c7c16f1810 BUG: 862082 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/5645 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gNFS: Set default outstanding RPC limit to 16Santosh Kumar Pradhan2014-01-152-23/+28
| | | | | | | | | | | | | With 64, NFS server hangs with large I/O load (~ 64 threads writing to NFS server). The test results from Ben England (Performance expert) suggest to set it as 16 instead of 64. Change-Id: I418ff5ba0a3e9fdb14f395b8736438ee1bbd95f4 BUG: 1008301 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6696 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: ben england <bengland@redhat.com>
* socket: propogate connect failure in socket_event_handlerKrishnan Parthasarathi2014-01-141-1/+1
| | | | | | | | | | | | | | | | | This patch prevents spurious handling of pollin/pollout events on an 'un-connected' socket, when outgoing packets to its remote endpoint are 'dropped' using iptables(8) rules. For eg, iptables -I OUTPUT -p tcp --dport 24007 -j DROP Change-Id: I1d3f3259dc536adca32330bfb7566e0b9a521e3c BUG: 1048188 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/6627 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* rpc/auth: Avoid NULL dereference in rpcsvc_auth_request_init()Harshavardhana2014-01-086-46/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Code section is bogus! ------------------------------------------ 370: if (!auth->authops->request_init) 371: ret = auth->authops->request_init (req, auth->authprivate); ------------------------------------------ Seems to have been never been used historically since logically above code has never been true to actually execute "authops->request_init() --> auth_glusterfs_{v2,}_request_init()" On top of that under "rpcsvc_request_init()" verf.flavour and verf.datalen are initialized from what is provided through 'callmsg'. ------------------------------------------ req->verf.flavour = rpc_call_verf_flavour (callmsg); req->verf.datalen = rpc_call_verf_len (callmsg); /* AUTH */ rpcsvc_auth_request_init (req); return req; ------------------------------------------ So the code in 'auth_glusterfs_{v2,}_request_init()' performing this operation will over-write the original flavour and datalen. ------------------------------------------ if (!req) return -1; memset (req->verf.authdata, 0, GF_MAX_AUTH_BYTES); req->verf.datalen = 0; req->verf.flavour = AUTH_NULL; ------------------------------------------ Refactoring the whole code into a more understandable version and also avoiding a potential NULL dereference Change-Id: I1a430fcb4d26de8de219bd0cb3c46c141649d47d BUG: 1049735 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6591 Reviewed-by: Santosh Pradhan <spradhan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gNFS: Small memory leak in rpcsvc_drc_init()Santosh Kumar Pradhan2014-01-031-25/+17
| | | | | | | | | | | | | | | | | | | | | | 1. The routine rpcsvc_drc_init() is only used while initialization of NFS xlator. It should just check for nfs.drc option and init DRC feature accordingly. If it's set to OFF, then rpcsvc_drc_init() allocates memory for svc.drc and set ret value to 0 and goes to out: block where drc is leaked. 2. rpcsvc_drc_init() should just allocate svc.drc and init it. Here svc.drc can never be valid. 3. If svc.drc gets init'd here, no point of checking for drc type here. Change-Id: I4085771cdb8c9c15d1b9c548b77929a37f27c124 BUG: 1047902 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6628 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gNFS: Possible SEGV crash in NFS while DRC is OFFSantosh Kumar Pradhan2014-01-031-1/+1
| | | | | | | | | | | | | | | | In rpcsvc_submit_generic(), FILE: rpc/rpc-lib/src/rpcsvc.c, while caching the reply (DRC), the code does not check if DRC is ON and goes ahead assuming DRC is on and try to take a LOCK on drc. FIX: Put a check on svc->drc by rpcsvc_need_drc(). Change-Id: I52c57280487e6061c68fd0b784e1cafceb2f3690 BUG: 1048072 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6632 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpc/server: add anonuid and anongid options for root-squashNiels de Vos2013-12-303-4/+21
| | | | | | | | | | | | | | | | | | | Introduce new options to modify the behaviour of server.root-squash. With server.anonuid and server.anongid the uid/gid can be specified and the root user (uid=0 and gid=0) will be mapped to the given uid/gid instead of nfsnobody (uid=65534 and gid=65534). Many thanks to Vikhyat Umrao for writing the majority of the test-case! Change-Id: I6379a3d2ef52b9b9707f2f6f0529657580c8d779 BUG: 1043886 CC: Vikhyat Umrao <vumrao@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/6546 Reviewed-by: Santosh Pradhan <spradhan@redhat.com> Reviewed-by: Vikhyat Umrao <vumrao@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* socket: unix socket connect path can't be greater than UNIX_PATH_MAX charactersKrishnan Parthasarathi2013-12-261-2/+2
| | | | | | | | | | Change-Id: I74788b63dd1c14507aa6d65182ea4b87a2e1f389 BUG: 1046308 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/6589 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpc,glusterd: Use rpc_clnt notifyfn to cleanup mydataKaushal M2013-12-162-2/+10
| | | | | | | | | | | | | | | | | | | | | | | rpc: - On a RPC_TRANSPORT_CLEANUP event, rpc_clnt_notify calls the registered notifyfn with a RPC_CLNT_DESTROY event. The notifyfn should properly cleanup the saved mydata on this event. - Break the reconnect chain when an rpc client is disabled. This will prevent new disconnect events which can lead to crashes. glusterd: - Added support for RPC_CLNT_DESTROY in glusterd_brick_rpc_notify - Use a common glusterd_rpc_clnt_unref() function throught glusterd in place of rpc_clnt_unref(). This function correctly gives up the big-lock before performing the unref. Change-Id: I93230441c5089039643fc9f5632477ef1b695348 BUG: 962619 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/5512 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/geo-rep: more glusterd and cli fixes for geo-rep.Ajeet Jha2013-12-121-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | -> handle option validation cases in reset case. -> Creating valid conf path when glusterd restarts. -> Reading the gsyncd worker thread status and displaying it. -> Displaying status-detail per worker. -> Fetch checkpoint info in geo-rep status. -> use-tarssh value validation added. misc: misc geo-rep fixes based on cluster, logrotate etc.. -> cluster/dht: fix 'stime' getxattr getting overwritten. -> cluster/afr: return max of 'stime' values in subvol. -> geo-rep-logrotate: Sending SIGHUP to geo-rep auxiliary. -> cluster/dht: fix convoluted logic while aggregating. -> cluster/*: fix 'stime' min/max fetch logic. Change-Id: I811acea0bbd6194797a3e55d89295d1ea021ac85 BUG: 1036552 Signed-off-by: Ajeet Jha <ajha@redhat.com> Reviewed-on: http://review.gluster.org/6405 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@gmail.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: Add an option to fetch just incremental or cumulative I/0Dawit Alemu2013-12-031-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | information 'volume profile info' fetches both cumulative and incremental I/O statistics. There isn't a way to fetch just cumulative or incremental statistics. This change introduces two optional arguments, namely "incremental" and "cumulative", that can be tacked on to 'volume profile info'. In other words, the new command format is volume profile <VOLNAME> {start | info [incremental | cumulative] | stop} [nfs] 'volume profile info incremental' - fetches incremental stats 'volume profile info cumulative' - fetches cumulative stats 'volume profile info' - fetches incremental and cumulative stats Change-Id: I5ddb45d990542ea611d23d251efebfec46f472d0 BUG: 1030580 Signed-off-by: Dawit Alemu <dalemu@redhat.com> Reviewed-on: http://review.gluster.org/6264 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* cli: More checks in rebalance status outputKaushal M2013-12-032-1/+3
| | | | | | | | | | Change-Id: Ibd2edc5608ae6d3370607bff1c626c8347c4deda BUG: 1031887 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/6337 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* socket: limit vector count to IOV_MAXAnand Avati2013-11-261-2/+2
| | | | | | | | | | | | | IOV_MAX is the maximum supported vector count on a given platform. Limit the count to IOV_MAX if higher. As we are performing non-blocking IO getting a smaller return value is handled naturally. Change-Id: I94ef67a03ed0e10da67a776af2b55506bf721611 BUG: 1034398 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6354 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@gmail.com>
* cli/glusterd: Changes to quota command Quota featureRaghavendra G2013-11-262-13/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | re-work. Following are the cli commands that are new/re-worked: ====================================================== volume quota <VOLNAME> {enable|disable|list [<path> ...]|remove <path>| default-soft-limit <percent>} | volume quota <VOLNAME> {limit-usage <path> <size> [<percent>]} | volume quota <VOLNAME> {alert-time|soft-timeout|hard-timeout} {<time>} volume status [all | <VOLNAME> [nfs|shd|<BRICK>|quotad]] [detail|clients|mem|inode|fd|callpool] volume statedump <VOLNAME> [nfs|quotad] [all|mem|iobuf|callpool|priv|fd|inode|history] glusterd changes: ================= * Quota limits are now set as extended attributes by glusterd from the aux mount created by the cli. * The gfids of the directories on which quota limits are set for a given volume are stored in /var/lib/glusterd/vols/<volname>/quota.conf file in binary format, and whose cksum and version is stored in /var/lib/glusterd/vols/<volname>/quota.cksum. Original-author: Krutika Dhananjay <kdhananj@redhat.com> Original-author: Krishnan Parthasarathi <kparthas@redhat.com> BUG: 969461 Change-Id: If32bba36c67f9c2a30417af9c6389045b2b7c13b Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6003 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* features/quota: Improvements to quotaRaghavendra G2013-11-261-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Two stages of quota enforcement is done: Soft and hard quota Upon reaching soft quota limit on the directory it logs/alerts in the quota daemon log (ie DEFAULT_LOG_DIR/quotad.log) and no more writes allowed after hard quota limit. After reaching the soft-limit the daemon alerts the user/admin repeatively for every 'alert-time', which is configurable. * Quota enforcer is moved to server-side. It takes care of enforcing quota. Since enforcer doesn't have the cluster view, it relies on another service called quota-aggregator. Aggregator, on query can return the size of a directory based on the cluster view. Enforcer is always loaded in the server graph and is by passed if the feature is not enabled. Options specific to enforcer: server-quota - Specifies whether the feature is on/off. It is used to by pass the quota if turned off. deem-statfs - If set to on, it takes quota limits into consideration while estimating fs size. (df command). The algorithm followed is, i. Adjust statvfs based on limit configured on root. ii. If limit is set on the inode passed, use size/limits on that inode to populate statvfs. Otherwise, use size/limits configured on root. iii. Upon statvfs, update the ctx->size on the inode. iv. Don't let DHT aggregate, instead take the maximum of the usages from the subvols of the DHT, since each of it contains the complete information. Enforcer also makes use of gfid-to-path conversion functionality to work correctly when a client like nfs predominently relies on nameless lookups. * Quota Aggregator acts as a thin client to provide cluster view Its a lightweight *gluster client* process with no mount point, started upon enabling quota or restarting the volume. This is a single process run on each brick, which can answer queries on all volumes in the cluster. Its volfile stored in GLUSTERD_DEFAULT_WORKING_DIR/quotad/quotad.vol. Credits: Raghavendra Bhat <rabhat@redhat.com> Varun Shastry <vshastry@redhat.com> Shishir Gowda <sgowda@redhat.com> Kruthika Dhananjay <kdhananj@redhat.com> Brian Foster <bfoster@redhat.com> Krishnan Parthasarathi <kparthas@redhat.com> Change-Id: Id1cb25b414951da34c665a55f77385d482e0f9de BUG: 969461 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/5952 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* gNFS: More clean up for Gluster NFSSantosh Kumar Pradhan2013-11-252-39/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 1) Fix the typo in NFS default ACL The typo was introduced as part of the Fix to BZ 1009210 i.e. http://review.gluster.org/5980. The user ACL xattr structure was passed to default ACL xattr. 2) Clean up NFS code to avoid unnecessary SEGV in rpcsvc_drc_reconfigure() which was not validating the svc->drc. Add a routine rpcsvc_drc_deinit() to handle the clean up of DRC specific data structures. For init(), use rpcsvc_drc_init(). 3) nfs_init_state() was returning wrong value even if the registration with portmapper failed, causing the NFS server process to hang around. As a result it used to get SEGV during rpcsvc_drc_reconfigure(). 4) Clean up memfactor usage across nfs.c nfs3.c. Change-Id: I5cea26cb68dd8a822ec0ae104952f67fe63fa703 BUG: 1009210 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6329 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gNFS: RFE for NFS connection behaviorSantosh Kumar Pradhan2013-11-147-39/+269
| | | | | | | | | | | | | | | Implement reconfigure() for NFS xlator so that volume set/reset wont restart the NFS server process. But few options can not be reconfigured dynamically e.g. nfs.mem-factor, nfs.port etc which needs NFS to be restarted. Change-Id: Ic586fd55b7933c0a3175708d8c41ed0475d74a1c BUG: 1027409 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6236 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* bd_map: Remove bd_map xlatorM. Mohan Kumar2013-11-131-10/+0
| | | | | | | | | | | Remove bd_map xlator and CLI related changes. Change-Id: If7086205df1907127c1a1fa4ba603f1c48421d09 BUG: 1028672 Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/5747 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterfs: zerofill supportM. Mohan Kumar2013-11-104-0/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for a new ZEROFILL fop. Zerofill writes zeroes to a file in the specified range. This fop will be useful when a whole file needs to be initialized with zero (could be useful for zero filled VM disk image provisioning or during scrubbing of VM disk images). Client/application can issue this FOP for zeroing out. Gluster server will zero out required range of bytes ie server offloaded zeroing. In the absence of this fop, client/application has to repetitively issue write (zero) fop to the server, which is very inefficient method because of the overheads involved in RPC calls and acknowledgements. WRITESAME is a SCSI T10 command that takes a block of data as input and writes the same data to other blocks and this write is handled completely within the storage and hence is known as offload . Linux ,now has support for SCSI WRITESAME command which is exposed to the user in the form of BLKZEROOUT ioctl. BD Xlator can exploit BLKZEROOUT ioctl to implement this fop. Thus zeroing out operations can be completely offloaded to the storage device , making it highly efficient. The fop takes two arguments offset and size. It zeroes out 'size' number of bytes in an opened file starting from 'offset' position. This patch adds zerofill support to the following areas: - libglusterfs - io-stats - performance/md-cache,open-behind - quota - cluster/afr,dht,stripe - rpc/xdr - protocol/client,server - io-threads - marker - storage/posix - libgfapi Client applications can exloit this fop by using glfs_zerofill introduced in libgfapi.FUSE support to this fop has not been added as there is no system call for this fop. Changes from previous version 3: * Removed redundant memory failure log messages Changes from previous version 2: * Rebased and fixed build error Changes from previous version 1: * Rebased for latest master TODO : * Add zerofill support to trace xlator * Expose zerofill capability as part of gluster volume info Here is a performance comparison of server offloaded zeofill vs zeroing out using repeated writes. [root@llmvm02 remote]# time ./offloaded aakash-test log 20 real 3m34.155s user 0m0.018s sys 0m0.040s [root@llmvm02 remote]# time ./manually aakash-test log 20 real 4m23.043s user 0m2.197s sys 0m14.457s [root@llmvm02 remote]# time ./offloaded aakash-test log 25; real 4m28.363s user 0m0.021s sys 0m0.025s [root@llmvm02 remote]# time ./manually aakash-test log 25 real 5m34.278s user 0m2.957s sys 0m18.808s The argument log is a file which we want to set for logging purpose and the third argument is size in GB . As we can see there is a performance improvement of around 20% with this fop. Change-Id: I081159f5f7edde0ddb78169fb4c21c776ec91a18 BUG: 1028673 Signed-off-by: Aakash Lal Das <aakash@linux.vnet.ibm.com> Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/5327 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpcsvc: implement per-client RPC throttlingAnand Avati2013-10-286-0/+107
| | | | | | | | | | | | | | | | Implement a limit on the total number of outstanding RPC requests from a given cient. Once the limit is reached the client socket is removed from POLL-IN event polling. Change-Id: I8071b8c89b78d02e830e6af5a540308199d6bdcd BUG: 1008301 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6114 Reviewed-by: Santosh Pradhan <spradhan@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rpc: add remote peer's hostname to call_bail log msgsKrishnan Parthasarathi2013-10-171-3/+4
| | | | | | | | | | Change-Id: I982cf7619463983c04b401d70a76635991d072d2 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/6091 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
* libglusterfs: Add monotonic clocking counter for timer threadHarshavardhana2013-10-151-11/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gettimeofday() returns the current wall clock time and timezone. Using these functions in order to measure the passage of time (how long an operation took) therefore seems like a no-brainer. This time suffer's from some limitations: a. They have a low resolution: “High-performance” timing by definition, requires clock resolutions into the microseconds or better. b. They can jump forwards and backwards in time: Computer clocks all tick at slightly different rates, which causes the time to drift. Most systems have NTP enabled which periodically adjusts the system clock to keep them in sync with “actual” time. The adjustment can cause the clock to suddenly jump forward (artificially inflating your timing numbers) or jump backwards (causing your timing calculations to go negative or hugely positive). In such cases timer thread could go into an infinite loop. From 'man gettimeofday': ---------- .. .. The time returned by gettimeofday() is affected by discontinuous jumps in the system time (e.g., if the system administrator manually changes the system time). If you need a monotonically increasing clock, see clock_gettime(2). .. .. ---------- Rationale: For calculating interval timing for Timer thread, all that’s needed should be clock as a simple counter that increments at a stable rate. This is necessary to avoid the jumps which are caused by using "wall time", this counter must be monotonic that can never “tick” backwards, ever. Change-Id: I701d31e71a85a73d21a6c5cd15583e7a5a645eeb BUG: 1017993 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6070 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr: [Feature] Command implementation to get heal-countVenkatesh Somyajulu2013-10-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently to know the number of files to be healed, either user has to go to backend and check the number of entries present in indices/xattrop directory. But if a volume consists of large number of bricks, going to each backend and counting the number of entries is a time-taking task. Otherwise user can give gluster volume heal vol-name info command but with this approach if no. of entries are very hugh in the indices/ xattrop directory, it will comsume time. So as a feature, new command is implemented. Command 1: gluster volume heal vn statistics heal-count This command will get the number of entries present in every brick of a volume. The output displays only entries count. Command 2: gluster volume heal vn statistics heal-count replica 192.168.122.1:/home/user/brickname Here if we are concerned with just one replica. So providing any one of the brick of a replica will get the number of entries to be healed for that replica only. Example: Replicate volume with replica count 2. Backend status: -------------- [root@dhcp-0-17 xattrop]# ls -lia | wc -l 1918 NOTE: Out of 1918, 2 entries are <xattrop-gfid> dummy entries so actual no. of entries to be healed are 1916. [root@dhcp-0-17 xattrop]# pwd /home/user/2ty/.glusterfs/indices/xattrop Command output: -------------- Gathering count of entries to be healed on volume volume3 has been successful Brick 192.168.122.1:/home/user/22iu Status: Brick is Not connected Entries count is not available Brick 192.168.122.1:/home/user/2ty Number of entries: 1916 Change-Id: I72452f3de50502dc898076ec74d434d9e77fd290 BUG: 1015990 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/6044 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr : Implementation of command "gluster volume heal vn statistics"Venkatesh Somyajulu2013-10-141-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "gluster volume heal volumename statistics" command gives the summary of the afr crawl done based on the entries present in the xattrop directory. Whenever afr crawls are attempted, the beginning time of crawl, end time of crawl, no of files healed, heal-failed count and number of files in split brain are shown along with the type of the crawl. If crawl is already in progress then it will give the number of files healed, heal failed count and number of files in split-brain from the beginning of the crawl and instead of telling the end time of the crawl, "CRAWL IN PROGRESS" message will be shown. Output format: command: "gluster volume heal volume-name statistics" Output: Gathering afr crawl statistics crawl statistics on volume volume-name has been successful ------------------------------------------------ Crawl statistics for brick no 0 Hostname of brick 192.168.122.248 Starting time of crawl: Wed Jul 10 15:52:38 2013 Ending time of crawl: Wed Jul 10 15:52:38 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 Starting time of crawl: Wed Jul 10 15:52:38 2013 Ending time of crawl: Wed Jul 10 15:52:38 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 ------------------------------------------------ Crawl statistics for brick no 1 Hostname of brick 192.168.122.1 Starting time of crawl: Wed Jul 10 15:52:42 2013 Ending time of crawl: Wed Jul 10 15:52:42 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 Starting time of crawl: Wed Jul 10 15:52:42 2013 Ending time of crawl: Wed Jul 10 15:52:42 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 -------------------------------------------------- Change-Id: I10bf9d10b005741db9973fb1352e0dd59ed99aa9 BUG: 949400 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/4790 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* transport/socket: don't try to set TCP_DELAY on unix domain socketsRaghavendra G2013-10-121-3/+3
| | | | | | | | | Change-Id: I290cd983bd0dff2e32e5ee90a12e888a3b31c6fd BUG: 969461 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/5954 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli,glusterd: Implement 'volume status tasks'Krutika Dhananjay2013-10-082-0/+2
| | | | | | | | | | | | | | | | | | | oVirt's Gluster Integration needs an inexpensive command that can be executed every 10 seconds to monitor async tasks and their parameters, for all volumes. The solution involves adding a 'tasks' sub-command to 'volume status' to fetch only the async task IDs, type and other relevant parameters. Only the originator glusterd participates in this command as all the information needed is available on all the nodes. This is to make the command suitable for being executed every 10 seconds. Change-Id: I1edc607baf29b001a5585079dec681d7c641b3d1 BUG: 1012346 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/6006 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* gNFS: Incorrect NFS ACL encoding for XFSSantosh Kumar Pradhan2013-09-291-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | Problem: Incorrect NFS ACL encoding causes "system.posix_acl_default" setxattr failure on bricks on XFS file system. XFS (potentially others?) doesn't understand when the 0x10 prefix is added to the ACL type field for default ACLs (which the Linux NFS client adds) which causes setfacl()->setxattr() to fail silently. NFS client adds NFS_ACL_DEFAULT(0x1000) for default ACL. FIX: Mask the prefix (added by NFS client) OFF, so the setfacl is not rejected when it hits the FS. Original patch by: "Richard Wareing" Change-Id: I17ad27d84f030cdea8396eb667ee031f0d41b396 BUG: 1009210 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/5980 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* core: block unused signals in created threadsAnand Avati2013-09-252-16/+13
| | | | | | | | | | | | | | | Block all signal except those which are set for explicit handling in glusterfs_signals_setup(). Since thread spawning code in libglusterfs and xlators can get called from application threads when used through libgfapi, it is necessary to do this blocking. Change-Id: Ia320f80521a83d2edcda50b9ad414583a0175281 BUG: 1011662 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5995 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli/glusterd: improve rebalance fix-layout status reportingRavishankar N2013-09-192-1/+9
| | | | | | | | | | | | | | | | | | | Problem: Currenly the CLI rebalance status command output does not indicate the 'type' of rebalance, i.e. whether a full rebalance or only a fix-layout was carried out. Fix: After the rebalance status of all peers is received by the originator glusterd, alter it to reflect the type of rebalance before passing it on to the CLI process. Change-Id: I1940ffda0d36e25e5b33c84a0ea210394cc9e1d3 BUG: 1004744 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/5826 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpcsvc: allocate large auxgid list on demandAnand Avati2013-09-175-1/+41
| | | | | | | | | | | | | | | For rpc requests having large aux group list, allocate large list on demand. Else use small static array by default. Without this patch, glusterfsd allocates 140+MB of resident memory just to get started and initialized. Change-Id: I3a07212b0076079cff67cdde18926e8f3b196258 Signed-off-by: Anand Avati <avati@redhat.com> BUG: 953694 Reviewed-on: http://review.gluster.org/5927 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* glusterfsd: Round robin DNS should not be relied upon withHarshavardhana2013-09-061-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | config service availability for clients. Backupvolfile server as it stands is slow and prone to errors with mount script and its combination with RRDNS. Instead in theory it should use all the available nodes in 'trusted pool' by default (Right now we don't have a mechanism in place for this) Nevertheless this patch provides a scenario where a list of volfile-server can be provided on command as shown below ----------------------------------------------------------------- $ glusterfs -s server1 .. -s serverN --volfile-id=<volname> \ <mount_point> ----------------------------------------------------------------- OR ----------------------------------------------------------------- $ mount -t glusterfs -obackup-volfile-servers=<server2>: \ <server3>:...:<serverN> <server1>:/<volname> <mount_point> ----------------------------------------------------------------- Here ':' is used as a separator for mount script parsing Now these will be remembered and recursively attempted for fetching vol-file until exhausted. This would ensure that the clients get 'volume' configs in a consistent manner avoiding the need to poll through RRDNS. Change-Id: If808bb8a52e6034c61574cdae3ac4e7e83513a40 BUG: 986429 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/5400 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd/cli: Geo-Replication "status detail" cmdVenky Shankar2013-09-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | Provides detailed status info in the following format MASTER <master-vol> SLAVE <slave-vol> NODE HEALTH UPTIME FILES SYNCD FILES PENDING BYTES PENDING DELETES PENDING ----------------------------------------------------------------------------------- This patch introdues "status detail" command to show crawl related information in CLI. These values are "pulled" from gsyncd when "status detail" is executed. Change-Id: I1fdaf7180eacce054a864d34971dc160bd7301e1 BUG: 990420 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/5590 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Tested-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpc: fix typo which refers glibc macroAnand Avati2013-08-231-1/+1
| | | | | | | | | | | | | | A typo which read MAX_AUTH_BYTES instead of GF_MAX_AUTH_BYTES was picking the value 400 instead of the larger 2048. This causes failures when number of aux group ids is a large number. Change-Id: Idb8d59aee2690fd53e24c2e09f58a16fe387ef27 BUG: 1000131 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5695 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs/client_t client_t implementation, phase 1Kaleb S. KEITHLEY2013-07-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Implementation of client_t The feature page for client_t is at http://www.gluster.org/community/documentation/index.php/Planning34/client_t In addition to adding libglusterfs/client_t.[ch] it also extracts/moves the locktable functionality from xlators/protocol/server to libglusterfs, where it is used; thus it may now be shared by other xlators too. This patch is large as it is. Hooking up the state dump is left to do in phase 2 of this patch set. (N.B. this change/patch-set supercedes previous change 3689, which was corrupted during a rebase. That change will be abandoned.) BUG: 849630 Change-Id: I1433743190630a6d8119a72b81439c0c4c990340 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/3957 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
generated by cgit (git 2.34.1) at 2024-04-19 21:59:44 +0000