summaryrefslogtreecommitdiffstats
path: root/xlators/protocol/client/src/client-handshake.c
Commit message (Collapse)AuthorAgeFilesLines
* rpc: transport may be destroyed while rpc isn'tKrishnan Parthasarathi2014-03-051-1/+1
| | | | | | | | | | | | | | | | rpc_clnt object is destroyed after the corresponding transport object is destroyed. But rpc_clnt_reconnect, a timer driven function, refers to the transport object beyond its 'life'. Instead, using the embedded connection object prevents use after free problem wrt transport object. Also, access transport object under conn->lock. Change-Id: Iae28e8a657d02689963c510114ad7cb7e6764e62 BUG: 962619 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/6751 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: conn-id should be unique when lk-heal is offPranith Kumar K2014-02-171-8/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: It was observed that in some cases client disconnects and re-connects before server xlator could detect that a disconnect happened. So it still uses previous fdtable and ltable. But it can so happen that in between disconnect and re-connect an 'unlock' fop may fail because the fds are marked 'bad' in client xlator upon disconnect. Due to this stale locks remain on the brick which lead to hangs/self-heals not happening etc. For the exact bug RCA please look at https://bugzilla.redhat.com/show_bug.cgi?id=1049932#c0 Fix: When lk-heal is not enabled make sure connection-id is different for every setvolume. This will make sure that a previous connection's resources are not re-used in server xlator. Change-Id: Id844aaa76dfcf2740db72533bca53c23b2fe5549 BUG: 1049932 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/6669 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* protocol/client: handle network disconnect/reconnect properlyAnand Avati2013-12-031-0/+1
| | | | | | | | | | | | | if client/server state versions match, we still need to notify parent xlators of reconnection (CHILD_UP) because they were notified of CHILD_DOWN at the time of disconnection. Change-Id: I36c4bde6d8c3db9cb0c48eeb10663b56897c932e BUG: 1037267 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6396 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* libglusterfs: Add monotonic clocking counter for timer threadHarshavardhana2013-10-151-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gettimeofday() returns the current wall clock time and timezone. Using these functions in order to measure the passage of time (how long an operation took) therefore seems like a no-brainer. This time suffer's from some limitations: a. They have a low resolution: “High-performance” timing by definition, requires clock resolutions into the microseconds or better. b. They can jump forwards and backwards in time: Computer clocks all tick at slightly different rates, which causes the time to drift. Most systems have NTP enabled which periodically adjusts the system clock to keep them in sync with “actual” time. The adjustment can cause the clock to suddenly jump forward (artificially inflating your timing numbers) or jump backwards (causing your timing calculations to go negative or hugely positive). In such cases timer thread could go into an infinite loop. From 'man gettimeofday': ---------- .. .. The time returned by gettimeofday() is affected by discontinuous jumps in the system time (e.g., if the system administrator manually changes the system time). If you need a monotonically increasing clock, see clock_gettime(2). .. .. ---------- Rationale: For calculating interval timing for Timer thread, all that’s needed should be clock as a simple counter that increments at a stable rate. This is necessary to avoid the jumps which are caused by using "wall time", this counter must be monotonic that can never “tick” backwards, ever. Change-Id: I701d31e71a85a73d21a6c5cd15583e7a5a645eeb BUG: 1017993 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6070 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: Prevent excessive logging of client's "disconnect" messages.Venkatesh Somyajulu2013-05-281-0/+1
| | | | | | | | | | | | | | | | | | | | | Problem: Currently when gluster volume start force is executed, client process will talk to glusterd to get the port of the brick. But if brick's path is not available it cannot return brick's port. So client process will keep connecting and disconnecting from glusterd for port-query which is ultimately responsible for execssive logging of disconnect messages. Fix: Message will be logged just once at INFO level after the first disconnect from glusterd. Afterwards "disconnect" messages will be logged in DEBUG mode. Change-Id: I2b787f3820b5da45e090c562e5698fcfe24a02cd BUG: 959969 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/4953 Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* protocol/client: Avoid double free of framePranith Kumar K2013-02-041-2/+1
| | | | | | | | | | | | | | | When client_submit_request fails it calls cbk. The cleanups should happen only in cbk. The code committed as part of http://review.gluster.org/4357 violates this. Also found that clnt_release_reopen_fd violates this as well. This patch fixes these issue. Change-Id: Ic02ba278724b03c65c00b686c39fd7846122618a BUG: 821056 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4464 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: Periodically attempt reopensPranith Kumar K2013-02-031-18/+81
| | | | | | | | | | | | | | | | | | | | | | If the brick is taken down and the hard disk is replaced and the brick is brought back up, the re-opens of the open-fds will fail because the file is not present on the brick. Re-opens are not attempted even if the files are re-created by self-heal until the brick is brought down after the files are re-created and brought back up. This is a problem with a VM-store in a replica-setup. Until the fd is re-opened the writes will never happen on the brick where the hard-disk is replaced. To handle this situation gracefully, client xlator is enhanced to perform finodelk, fxattrop, writev, readv using anonymous fds if the file is yet to be re-opened. If the fop succeeds then client xlator attempts re-open. Change-Id: I1cc6d1bbf8227cd996868ab2ed0a57fb05e00017 BUG: 821056 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4358 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* protocol/client: Add fdctx back to saved-list after reopenPranith Kumar K2013-02-031-90/+73
| | | | | | | | | Change-Id: I01caa1b51570359e6e3ffe1ffb7279cbdb0b0c64 BUG: 821056 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4357 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* protocol/client: print a message regarding brick status in case of failureKrutika Dhananjay2012-12-201-1/+3
| | | | | | | | | | | | | | that way, it would help admins to look at the corresponding brick directly. All credit goes to Amar. Change-Id: I959df59111864cc0574945d827f8fe5f2d919491 BUG: 839021 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/4341 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* client-handshake: synchronize config.remote_port setting b/wRaghavendra G2012-10-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | rpc_clnt_reconnect and client_query_portmap_cbk problem: ------- Theoretically there is a possibility that we could complete querying the remote brick's port number before rpc_transport_connect can return. If rpc_clnt_reconnect happens to be the caller of rpc_transport_connect and we've already got the remote brick's port number by the time rpc_transport_connect returns, without synchronization, rpc_clnt_connect resets config.remote_port to zero even before we have attempted a connection with remote brick. fix: --- By making only poll thread do setting and resetting of config.remote_port, we avoid the race-condition. Change-Id: I51879ba1cac651a80ff5c9c070ec7fe1ceea9e05 BUG: 765051 Signed-off-by: Raghavendra G <raghavendra@gluster.com> Reviewed-on: http://review.gluster.org/4044 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: quick-reconnect after portmap queryAnand Avati2012-09-251-1/+1
| | | | | | | | | | | | | | | | | | Currently the disconnect after a portmap query is treated like an ordinary disconnect and the reconnection attempt (in this case, to the brick) is attempted only after 3 secs. This results in a delay which is unnecessary. Mark the disconnection happening because of a successful portmap query as needing a 'quick reconnect' to avoid the delay for this special case. Change-Id: I43c8292ff0c30858d883ff3569a3761acbf2f5eb BUG: 860220 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/3994 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* protocol/client: Fix negative return in client_setvolumeKrutika Dhananjay2012-08-011-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PROBLEM: The function dict_serialized_length could, owing to an error, return a negative integer (-EINVAL) that gets assigned to an unsigned int member 'dict_len' of gf_setvolume_req structure. FIX: Hold the value returned by dict_serialized_length in local variable ret (which is a signed int). Test if ret is negative, in which case the control would anyway branch to the label fail where the function returns. Otherwise dict_len is assigned with ret, in turn giving a more meaningful value to the attribute length. TEST: Attached gdb to glusterfs mount process, set breakpoint at client_setvolume, forced dict_serialized_length to return -EINVAL (indirectly by forcing _dict_serialized_length to return -EINVAL after setting count to -1 within its body) and checked the value of ret (which is now sure to contain a negative value) whose value will be appropriately tested to decide the next course of action within client_setvolume: whether to simply exit due to an error or execute the subsequent statements. Change-Id: Ib22ad8f30d8ae04acaf2ff5bfee9c348a2c47148 BUG: 789278 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.com/3755 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* remove useless if-before-free (and free-like) functionsJim Meyering2012-07-131-6/+3
| | | | | | | | | | | | See comments in http://bugzilla.redhat.com/839925 for the code to perform this change. Signed-off-by: Jim Meyering <meyering@redhat.com> BUG: 839925 Change-Id: I10e4ecff16c3749fe17c2831c516737e08a3205a Reviewed-on: http://review.gluster.com/3661 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpc: variable name changesAmar Tumballi2012-07-121-8/+8
| | | | | | | | | | | | | 's/3_1/3_3/g' in case of glusterfs protocol 's/3_1_/_/g' in case of CLI and mgmt protocol Change-Id: I6e6510d02c05f68f290c52ed284c04576326e12c Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 764890 Reviewed-on: http://review.gluster.com/3632 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: Re-open should not have O_CREAT|O_TRUNC|O_EXCLPranith Kumar K2012-06-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RCA The bug is observed in 3.2.x because posix xlator changes the uid/gid of file as per frame->root-uid/gid if O_CREAT flag is set in open fop. Posix does not do this in 3.3.x so that bug does not appear anymore but this issue exposed the actual bug in client xlator re-open. Re-open of a file on re-connection should not perform re-open with the same flags at the time of open/create/opendir. Imagine a case where a file is opened with O_TRUNC|O_RDWR and some data is written to it, now if the brick goes down and comes back the file will be truncated. When I tested this case, the file is not truncated because locks xlator resets O_TRUNC unconditionally. Client xlator re-open bug and locks xlator bug cancel each other. Fix Reset O_CREAT|O_TRUNC|O_EXCL flags in re-open. Locks xlator should not reset O_TRUNC. Additional changes Removed wbflags as it is not assigned at all. Testcases Automated go program is at: ://bugzilla.redhat.com/show_bug.cgi?id=807976#c2 Change-Id: I0080344fdda2e62e7c976c35a5bf5f1fa8838891 BUG: 807976 Signed-off-by: Pranith Kumar K <pranithk@gluster.com> Reviewed-on: http://review.gluster.com/3582 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: Remember the gfid of opened fdPranith Kumar K2012-06-061-38/+16
| | | | | | | | | | | | | | | | This is needed when the fresh lookup triggers self-heal, gfid won't be present in inode yet. Similar situation happens with Rebalance as it does not perform inode_link. Added similar fix for re-opendir. Removed inode from fdctx and removed some duplication of code. Change-Id: Ic94e5738c8585ed86801d2eed9ddab1015246710 BUG: 826080 Signed-off-by: Pranith Kumar K <pranithk@gluster.com> Reviewed-on: http://review.gluster.com/3517 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: do not access the local object after being freedRaghavendra Bhat2012-05-311-2/+2
| | | | | | | | | | Change-Id: I2d3aeb084168b9ed68a670b91e09126917f82968 BUG: 826588 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.com/3494 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: use correct xlator object while creating framesRaghavendra G2012-05-231-2/+2
| | | | | | | | | | | during reopening files and reacquiring locks. Change-Id: I29f42fcfa9e782ce9e323e53024e5034029914a7 BUG: 822337 Signed-off-by: Raghavendra G <raghavendra@gluster.com> Reviewed-on: http://review.gluster.com/3420 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: Concatinate the graph uuid along with process uuid inMohammed Junaid2012-05-181-10/+18
| | | | | | | | | | | setlk_version. Change-Id: Idec06c5ef1d440864e465f008a38c86395b52aba BUG: 820831 Signed-off-by: Mohammed Junaid <junaid@redhat.com> Reviewed-on: http://review.gluster.com/3314 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* license: dual license under GPLV2 and LGPLV3+Kaleb KEITHLEY2012-05-101-14/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Note that the license was not changed in any of the following: .../argp-standalone/... .../booster/... .../cli/... .../contrib/... .../extras/... .../glusterfsd/... .../glusterfs-hadoop/... .../mod_clusterfs/... .../scheduler/... .../swift/... The license was not changed in any of the non-building xlators. The license was not changed in any of the xlators that seemed — to me — to be clearly server-side only, e.g. protocol/server Note too that copyright was changed along with the license; I did not change the copyright in files where the license did not change. If you find any errors or ommissions please don't hesitate to let me know. The complete list of files with the license change is: libglusterfs/src/byte-order.h libglusterfs/src/call-stub.c libglusterfs/src/call-stub.h libglusterfs/src/checksum.c libglusterfs/src/checksum.h libglusterfs/src/circ-buff.c libglusterfs/src/circ-buff.h libglusterfs/src/common-utils.c libglusterfs/src/common-utils.h libglusterfs/src/compat-errno.c libglusterfs/src/compat-errno.h libglusterfs/src/compat.c libglusterfs/src/compat.h libglusterfs/src/daemon.c libglusterfs/src/daemon.h libglusterfs/src/defaults.c libglusterfs/src/defaults.h libglusterfs/src/dict.c libglusterfs/src/dict.h libglusterfs/src/event-history.c libglusterfs/src/event-history.h libglusterfs/src/event.c libglusterfs/src/event.h libglusterfs/src/fd-lk.c libglusterfs/src/fd-lk.h libglusterfs/src/fd.c libglusterfs/src/fd.h libglusterfs/src/gf-dirent.c libglusterfs/src/gf-dirent.h libglusterfs/src/globals.c libglusterfs/src/globals.h libglusterfs/src/glusterfs.h libglusterfs/src/graph-print.c libglusterfs/src/graph-utils.h libglusterfs/src/graph.c libglusterfs/src/hashfn.c libglusterfs/src/hashfn.h libglusterfs/src/iatt.h libglusterfs/src/inode.c libglusterfs/src/inode.h libglusterfs/src/iobuf.c libglusterfs/src/iobuf.h libglusterfs/src/latency.c libglusterfs/src/latency.h libglusterfs/src/list.h libglusterfs/src/lkowner.h libglusterfs/src/locking.h libglusterfs/src/logging.c libglusterfs/src/logging.h libglusterfs/src/mem-pool.c libglusterfs/src/mem-pool.h libglusterfs/src/mem-types.h libglusterfs/src/options.c libglusterfs/src/options.h libglusterfs/src/rbthash.c libglusterfs/src/rbthash.h libglusterfs/src/run.c libglusterfs/src/run.h libglusterfs/src/scheduler.c libglusterfs/src/scheduler.h libglusterfs/src/stack.c libglusterfs/src/stack.h libglusterfs/src/statedump.c libglusterfs/src/statedump.h libglusterfs/src/syncop.c libglusterfs/src/syncop.h libglusterfs/src/syscall.c libglusterfs/src/syscall.h libglusterfs/src/timer.c libglusterfs/src/timer.h libglusterfs/src/trie.c libglusterfs/src/trie.h libglusterfs/src/xlator.c libglusterfs/src/xlator.h libglusterfsclient/src/libglusterfsclient-dentry.c libglusterfsclient/src/libglusterfsclient-internals.h libglusterfsclient/src/libglusterfsclient.c libglusterfsclient/src/libglusterfsclient.h rpc/rpc-lib/src/auth-glusterfs.c rpc/rpc-lib/src/auth-null.c rpc/rpc-lib/src/auth-unix.c rpc/rpc-lib/src/protocol-common.h rpc/rpc-lib/src/rpc-clnt.c rpc/rpc-lib/src/rpc-clnt.h rpc/rpc-lib/src/rpc-transport.c rpc/rpc-lib/src/rpc-transport.h rpc/rpc-lib/src/rpcsvc-auth.c rpc/rpc-lib/src/rpcsvc-common.h rpc/rpc-lib/src/rpcsvc.c rpc/rpc-lib/src/rpcsvc.h rpc/rpc-lib/src/xdr-common.h rpc/rpc-lib/src/xdr-rpc.c rpc/rpc-lib/src/xdr-rpc.h rpc/rpc-lib/src/xdr-rpcclnt.c rpc/rpc-lib/src/xdr-rpcclnt.h rpc/rpc-transport/rdma/src/name.c rpc/rpc-transport/rdma/src/name.h rpc/rpc-transport/rdma/src/rdma.c rpc/rpc-transport/rdma/src/rdma.h rpc/rpc-transport/socket/src/name.c rpc/rpc-transport/socket/src/name.h rpc/rpc-transport/socket/src/socket.c rpc/rpc-transport/socket/src/socket.h xlators/cluster/afr/src/afr-common.c xlators/cluster/afr/src/afr-dir-read.c xlators/cluster/afr/src/afr-dir-read.h xlators/cluster/afr/src/afr-dir-write.c xlators/cluster/afr/src/afr-dir-write.h xlators/cluster/afr/src/afr-inode-read.c xlators/cluster/afr/src/afr-inode-read.h xlators/cluster/afr/src/afr-inode-write.c xlators/cluster/afr/src/afr-inode-write.h xlators/cluster/afr/src/afr-lk-common.c xlators/cluster/afr/src/afr-mem-types.h xlators/cluster/afr/src/afr-open.c xlators/cluster/afr/src/afr-self-heal-algorithm.c xlators/cluster/afr/src/afr-self-heal-algorithm.h xlators/cluster/afr/src/afr-self-heal-common.c xlators/cluster/afr/src/afr-self-heal-common.h xlators/cluster/afr/src/afr-self-heal-data.c xlators/cluster/afr/src/afr-self-heal-entry.c xlators/cluster/afr/src/afr-self-heal-metadata.c xlators/cluster/afr/src/afr-self-heal.h xlators/cluster/afr/src/afr-self-heald.c xlators/cluster/afr/src/afr-self-heald.h xlators/cluster/afr/src/afr-transaction.c xlators/cluster/afr/src/afr-transaction.h xlators/cluster/afr/src/afr.c xlators/cluster/afr/src/afr.h xlators/cluster/afr/src/pump.c xlators/cluster/afr/src/pump.h xlators/cluster/dht/src/dht-common.c xlators/cluster/dht/src/dht-common.h xlators/cluster/dht/src/dht-diskusage.c xlators/cluster/dht/src/dht-hashfn.c xlators/cluster/dht/src/dht-helper.c xlators/cluster/dht/src/dht-inode-read.c xlators/cluster/dht/src/dht-inode-write.c xlators/cluster/dht/src/dht-layout.c xlators/cluster/dht/src/dht-linkfile.c xlators/cluster/dht/src/dht-mem-types.h xlators/cluster/dht/src/dht-rebalance.c xlators/cluster/dht/src/dht-rename.c xlators/cluster/dht/src/dht-selfheal.c xlators/cluster/dht/src/dht.c xlators/cluster/dht/src/nufa.c xlators/cluster/dht/src/switch.c xlators/cluster/stripe/src/stripe-helpers.c xlators/cluster/stripe/src/stripe-mem-types.h xlators/cluster/stripe/src/stripe.c xlators/cluster/stripe/src/stripe.h xlators/features/index/src/index-mem-types.h ¹ xlators/features/index/src/index.c ¹ xlators/features/index/src/index.h ¹ xlators/performance/io-cache/src/io-cache.c xlators/performance/io-cache/src/io-cache.h xlators/performance/io-cache/src/ioc-inode.c xlators/performance/io-cache/src/ioc-mem-types.h xlators/performance/io-cache/src/page.c xlators/performance/io-threads/src/io-threads.c xlators/performance/io-threads/src/io-threads.h xlators/performance/io-threads/src/iot-mem-types.h xlators/performance/md-cache/src/md-cache-mem-types.h xlators/performance/md-cache/src/md-cache.c xlators/performance/quick-read/src/quick-read-mem-types.h xlators/performance/quick-read/src/quick-read.c xlators/performance/quick-read/src/quick-read.h xlators/performance/read-ahead/src/page.c xlators/performance/read-ahead/src/read-ahead-mem-types.h xlators/performance/read-ahead/src/read-ahead.c xlators/performance/read-ahead/src/read-ahead.h xlators/performance/symlink-cache/src/symlink-cache.c xlators/performance/write-behind/src/write-behind-mem-types.h xlators/performance/write-behind/src/write-behind.c xlators/protocol/auth/addr/src/addr.c ¹ xlators/protocol/auth/login/src/login.c ¹ xlators/protocol/client/src/client-callback.c xlators/protocol/client/src/client-handshake.c xlators/protocol/client/src/client-helpers.c xlators/protocol/client/src/client-lk.c xlators/protocol/client/src/client-mem-types.h xlators/protocol/client/src/client.c xlators/protocol/client/src/client.h xlators/protocol/client/src/client3_1-fops.c ¹ Copyright only, license reverted to original Change-Id: If560e826c61b6b26f8b9af7bed6e4bcbaeba31a8 BUG: 820551 Signed-off-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.com/3304 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* protocol/client: hold lock when cancelling ping_timer inRaghavendra G2012-05-051-16/+22
| | | | | | | | | | | | client_ping_cbk. Change-Id: I2b4e723ef119c62902f8a692a8a1f424da0d08b4 BUG: 816951 Signed-off-by: Raghavendra G <raghavendra@gluster.com> Reviewed-on: http://review.gluster.com/3254 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* core: coverity issues fixedAmar Tumballi2012-04-231-2/+1
| | | | | | | | | | | | this is not a complete set of issues getting fixed. Will address other issues in another patch. Change-Id: Ib01c7b11b205078cc4d0b3f11610751e32d14b69 Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 789278 Reviewed-on: http://review.gluster.com/3145 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* core: adding extra data for fopsAmar Tumballi2012-03-221-1/+0
| | | | | | | | | | | | | with this change, the xlator APIs will have a dictionary as extra argument, which is passed between all the layers. This can be utilized for overloading in some of the operations. Change-Id: I58a8186b3ef647650280e63f3e5e9b9de7827b40 Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 782265 Reviewed-on: http://review.gluster.com/2960 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: Handle failures in lock self healing gracefully (part2).Mohammed Junaid2012-03-191-49/+169
| | | | | | | | | | | | | | | During reopening of fd's and reacquiring of locks on the fd (after a reconnect), a release on a fd on which reacquiring of locks is in progress will free up fdctx. This patch will keep fdctx valid until the reacquiring of locks is in progress. Change-Id: I0fae27544a7f8ddaa26def4ee4d41a8a2b322521 BUG: 795386 Signed-off-by: Mohammed Junaid <junaid@redhat.com> Reviewed-on: http://review.gluster.com/2819 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* protocol/client: replace STACK_UNWIND_STRICT macro with CLIENT_STACK_UNWIND,Raghavendra G2012-03-181-2/+3
| | | | | | | | | | | | which does appropraite cleanup before unwinding. Signed-off-by: Raghavendra G <raghavendra@gluster.com> Change-Id: Ic49d6e21c5fc56e747afec35be2bebbbbd2a6583 BUG: 767359 Reviewed-on: http://review.gluster.com/2897 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpc: don't unwind the fop in caller if client_submit_request failsRaghavendra G2012-03-181-38/+17
| | | | | | | | | | | | | client_submit_request guarantees that the cbkfn - which we pass to it as argument - is called whenever there is a failure. Change-Id: I0e8ce5a6b320246dc13ce4318b04739d38d183a3 BUG: 767359 Signed-off-by: Raghavendra G <raghavendra@gluster.com> Reviewed-on: http://review.gluster.com/2896 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: Added lk_ctx info in fdctx dumpKrishnan Parthasarathi2012-03-071-18/+2
| | | | | | | | | | | | | | | | | | - Added a brief explanation as to why we can't use gf_log when in statedump. - Removed gf_log messages from client_priv_dump since it can cause a 'deadlock' - See statedump.c for explanation - Added try-lock based accessors for fd_lk_list for dump purposes. Change-Id: I1d755a4ef2c568acf22fb8c4ab0a33a4f5fd07b4 BUG: 789858 Signed-off-by: Krishnan Parthasarathi <kp@gluster.com> Reviewed-on: http://review.gluster.com/2882 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* protocol/client: Calling GF_FREE on memory allocated via GF_CALLOC.Mohammed Junaid2012-03-011-1/+1
| | | | | | | | | | | | This is a temporary fix. A clean fix would be to allocate memory using mem_get0 and free via mem_put. Change-Id: I6351ab22c2f05ba8fa4aaad67f375027df873807 BUG: 796656 Signed-off-by: Mohammed Junaid <junaid@redhat.com> Reviewed-on: http://review.gluster.com/2852 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* protocol/client: send unique key to server during handshakeAmar Tumballi2012-02-291-2/+7
| | | | | | | | | | | | utilize the graph->id for making the key unique. Change-Id: I0c1b355aa901af88e65fd12cb9e0535318856867 BUG: 783982 Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: http://review.gluster.com/2831 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Mohammed Junaid <junaid@redhat.com>
* core: utilize mempool for frame->local allocationsAmar Tumballi2012-02-211-3/+3
| | | | | | | | | | | | | | | in each translator, which uses 'frame->local', we are using GF_CALLOC/GF_FREE, which would be costly considering the number of allocation happening in a lifetime of 'fop'. It would be good to utilize the mem pool framework for xlator's local structures, so there is no allocation overhead. Change-Id: Ida6e65039a24d9c219b380aa1c3559f36046dc94 Signed-off-by: Amar Tumballi <amar@gluster.com> BUG: 765336 Reviewed-on: http://review.gluster.com/2772 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client,server: fcntl lock self healing.Mohammed Junaid2012-02-201-19/+462
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently(with out this patch), on a disconnect the server cleans up the transport which inturn closes the fd's and releases the locks acquired on those fd's by that client. On a reconnect, client just reopens the fd's but doesn't reacquire the locks. The application that had previously acquired the locks still is under the assumption that it is the owner of those locks which might have been granted to other clients(if they request) by the server leading to data corruption. This patch allows the client to reacquire the fcntl locks (held on the fd's) during client-server handshake. * The server identifies the client via process-uuid-xl (which is a combination of uuid and client-protocol name, it is assumed to be unique) and lk-version number. * The client maintains a list of process-uuid-xl, lk-version pair for each accepted connection. On a connect, the server traverses the list for a matching pair, if a matching pair is not found the the server returns lk-version with value 0, else it returns the lk-version it has in store. * On a disconnect, the server and client enter grace period, and on the completion of the grace period, the client bumps up its lk-version number (which means, it will reacquire the locks the next time) and the server will distroy the connection. If reconnection happens within the grace period, the server will find the matching (process-uuid-xl, lk-version) pair in its list which guarantees that the fd's and there corresponding locks are still valid for this client. Configurable options: To set grace-timeout, the following options are option server.grace-timeout value option client.grace-timeout value To enable or disable the lk-heal, option lk-heal [on|off] gluster volume set command can be used to configurable options Change-Id: Id677ef1087b300d649f278b8b2aa0d94eae85ed2 BUG: 795386 Signed-off-by: Mohammed Junaid <junaid@redhat.com> Reviewed-on: http://review.gluster.com/2766 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* protocol xdr: remove 'path<>'Amar Tumballi2012-02-141-2/+0
| | | | | | | | | | | | | | | client was sending 'path' on wire, which gets ignored on server side, and also doesn't get freed up, which causes memory leak. also with not having path on wire, the xdr size on wire most of the time can remain constant, which helps in allocating RDMA buffers. Change-Id: Ie0d36a670be60b02fd1e925c6f977b1a71def5cd BUG: 790298 Signed-off-by: Amar Tumballi <amar@gluster.com> Reviewed-on: http://review.gluster.com/2744 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client : prevent client from reconnecting when serverKaushal M2012-02-031-3/+21
| | | | | | | | | | | | | | | | | | authentication fails This prevents the client from trying to reconnect on server authentication failure. Reconnecting on authentcation failure causes hung mounts on unauthorised clients. This patch fixes this problem. Also, mount.glusterfs script unmounts mount-point on mount failure to prevent hung mounts. Change-Id: I5615074d27948077bad491a38cecae1b7f5159fb BUG: 765240 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.com/398 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amar@gluster.com>
* core: change lk-owner as a 1k bufferAmar Tumballi2012-01-241-0/+1
| | | | | | | | | | | | | so, NLM can send the lk-owner field directly to the locks translators, while doing the same effort, also enabled sending maximum of 500 aux gid over protocol. Change-Id: I87c2514392748416f7ffe21d5154faad2e413969 Signed-off-by: Amar Tumballi <amar@gluster.com> BUG: 767229 Reviewed-on: http://review.gluster.com/779 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@gluster.com>
* glusterfs protocol: handshake to log the version of the peerAmar Tumballi2011-09-211-0/+8
| | | | | | | | | | | | | | | | | * As RPC program's name is just used for logging, we now have 'PACKAGE_VERSION' part of the string, which gets logged in client side. * From client, we send the PACKAGE_VERSION in handshake dictionary, which gets logged on serverside handshake. The change doesn't break any compatibility between client or server as it would only enhance the logging part of handshake. Change-Id: Ie7f498af2f5d3f97be37c8d982061cb6021883ce BUG: 3589 Reviewed-on: http://review.gluster.com/467 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* modify to the way we used XDR definitions files (.x files)Amar Tumballi2011-09-071-19/+15
| | | | | | | | | | | | | | | | | | | | | | | | Earlier: step 1: copy the existing <xdr>.x files to /tmp step 2: generate '.[ch]' files using 'rpcgen <xdr>.x' step 3: check diff with the to the existing files, add only your part of changes back to the original file. (ignore other changes). step 4: there is another file to write wrapper functions to convert structures to/from XDR buffers, update it with your new structure. step 5: use these wrapper functions in the newly written procedures. step 6: commit :-| Now: step 1: update (mostly adding only) the <xdr>.x file step 2: run '<path-to-src>/extras/generate-xdr-files.sh <xdr>.x' command step 3: implement rpc procedure to handle the request/response. step 4: commit :-) Change-Id: I219f9159fc980438c86e847c6b030be96e595ea2 BUG: 3488 Reviewed-on: http://review.gluster.com/341 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@gluster.com>
* glusterfs protocol: bring in variable sized iobuf supportAmar Tumballi2011-09-071-7/+12
| | | | | | | | | | | is a step towards reducing glusterfs memory footprint. should also help a bit in overall performance. Change-Id: I074d5813602b2c960d59562e792b3dc6e43d2f42 BUG: 3475 Reviewed-on: http://review.gluster.com/322 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@gluster.com>
* Change Copyright current yearPranith Kumar K2011-08-101-1/+1
| | | | | | | | Change-Id: I2d10f2be44f518f496427f257988f1858e888084 BUG: 3348 Reviewed-on: http://review.gluster.com/200 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@gluster.com>
* LICENSE: s/GNU Affero General Public/GNU General Public/Pranith Kumar K2011-08-061-3/+3
| | | | | | | | Change-Id: I3914467611e573cccee0d22df93920cf1b2eb79f BUG: 3348 Reviewed-on: http://review.gluster.com/182 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@gluster.com>
* client-handshake: skip CHILD_DOWN notifications when client is querying port ↵Raghavendra G2011-07-121-0/+2
| | | | | | | | | | using different volume names in the presence of rdma. Signed-off-by: Raghavendra G <raghavendra@gluster.com> Signed-off-by: Anand Avati <avati@gluster.com> BUG: 3091 (rebalance fails with "transport endpoint not connected" in 3.2.1 rdma set-up) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=3091
* logging: fill proper domain names at places where it is missingAmar Tumballi2011-06-161-11/+14
| | | | | | | | | | also changed some error messages where it was not explicit Signed-off-by: Amar Tumballi <amar@gluster.com> Signed-off-by: Anand Avati <avati@gluster.com> BUG: 2346 (Log message enhancements in GlusterFS - phase 1) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2346
* fix multiple transport portmap issues in client handshakeAmar Tumballi2011-06-081-0/+21
| | | | | | | | Signed-off-by: Amar Tumballi <amar@gluster.com> Signed-off-by: Anand Avati <avati@gluster.com> BUG: 2294 (Currently there is no way through cli to make a volume listen on both the transports (socket/rdma)) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2294
* rpc-clnt: consider the (re-)configured port for only one connect() callAmar Tumballi2011-05-301-9/+0
| | | | | | | | | | | this way, if remote_port is set due to queryport, that can fall back to default port (or 'option remote-port' value) when it disconnects. Signed-off-by: Amar Tumballi <amar@gluster.com> Signed-off-by: Anand Avati <avati@gluster.com> BUG: 2709 (issues with port (re-)configuration in client protocol) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2709
* loc_t: add 'gfid' and 'pargfid' fieldsAmar Tumballi2011-05-031-2/+2
| | | | | | | | | | | | | | these fields are used mainly in case of selfheal path, where 'inode->gfid'||'parent->gfid' is not yet set. These fields in 'loc' will have lower precedence than 'inode->gfid' in client protocol. Signed-off-by: Amar Tumballi <amar@gluster.com> Signed-off-by: Anand Avati <avati@gluster.com> BUG: 2346 (Log message enhancements in GlusterFS - phase 1) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2346
* remove excessive logs due to log enhancementAmar Tumballi2011-04-131-4/+8
| | | | | | | | Signed-off-by: Amar Tumballi <amar@gluster.com> Signed-off-by: Anand Avati <avati@gluster.com> BUG: 2346 (Log message enhancements in GlusterFS - phase 1) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2346
* protocol/client: fix the fd_count decrement logicAmar Tumballi2011-04-121-3/+5
| | | | | | | | | | the error creeped in during some code cleanup and logging enhancement Signed-off-by: Amar Tumballi <amar@gluster.com> Signed-off-by: Anand Avati <avati@gluster.com> BUG: 1761 (incorrect self-heal behaviour when files are deleted) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1761
* removed reference to GF_LOG_NORMALAmar Tumballi2011-04-071-1/+1
| | | | | | | | | | instead used GF_LOG_INFO, which is more standard log level. Signed-off-by: Amar Tumballi <amar@gluster.com> Signed-off-by: Vijay Bellur <vijay@gluster.com> BUG: 2669 (RuntimeError: cannot recognize log level "normal") URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2669
* protocol/client: make sure to send only genuine events up to parentAmar Tumballi2011-04-061-31/+18
| | | | | | | | | | | | that way parent notify logic is fine. also, remove 'xlator_notify()' call in code, instead use 'default_notify()' Signed-off-by: Amar Tumballi <amar@gluster.com> Signed-off-by: Vijay Bellur <vijay@gluster.com> BUG: 2584 (Inode number changes on a directory when one of subvolumes is down in replicate) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2584
* protocol/client: log enhancementAmar Tumballi2011-03-171-79/+151
| | | | | | | | Signed-off-by: Amar Tumballi <amar@gluster.com> Signed-off-by: Vijay Bellur <vijay@dev.gluster.com> BUG: 2346 (Log message enhancements in GlusterFS - phase 1) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2346
* protocol/client: decrement reopen fd count in cases of re-open errorsPranith K2011-02-071-2/+24
| | | | | | | | | | | | | | | In post-client-handshake client tries to re-open files, dirs, but if those files/dirs are already deleted when the brick is down the reopens won't even get triggered. In those cases the re-open fd count needs to be decremented to make sure the child up is triggered. I have also made similar changes in all the error cases of re-open/re-open-dir cbks. Lock recovery is already handling all these errors. Signed-off-by: Pranith Kumar K <pranithk@gluster.com> Signed-off-by: Anand V. Avati <avati@dev.gluster.com> BUG: 1761 (incorrect self-heal behaviour when files are deleted) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1761
generated by cgit (git 2.34.1) at 2024-04-19 15:12:24 +0000