summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Fix spurious brick disconnectsEmmanuel Dreyfus2013-04-291-0/+9
| | | | | | | | | | | | | | | | Spurious disconnect were caused by a race condition inside rpc_transport_ref()/rpc_transport_unref() that allowed the refcount to drop to zero while the transport was still in use. The race condition is made possible because of an uninitiaized mutex produced when socket_server_event_handler() copies the transport BUG: 764655 Change-Id: I34fe097a0ac21b0dbf58f5eed84880e3fd9814f2 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/4900 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: Avoid storing empty lines in command historyRavishankar N2013-04-281-1/+2
| | | | | | | | | | | | | | | | | When the console manager is run in the interactive mode, it also saves empty lines (i.e. the Enter key is pressed without running a command) in it's command history. Avoid this by processing the line only if readline() returns a non-empty string. Makes it easier to navigate the history using arrow keys. modified: cli/src/cli-rl.c Change-Id: I0fcce394474589bb345b7c9ef39d25849dc0c2af BUG: 957139 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/4894 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli: add a command 'gluster pool list [--xml]'Niels de Vos2013-04-266-86/+241
| | | | | | | | | | | | | | | | | * unlike 'gluster peer status', which lists only info about peers, this command lists localhost also in the list, so the sorted output from all the nodes should match. * made the output script friendly by keeping it one output per line. Change-Id: I853656753b35c617debbcceecbb71c8d6dd3c334 BUG: 764638 Original-review: http://review.gluster.org/4221 Original-author: Amar Tumballi <amarts@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/4862 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: sync glusterfs.spec.in with Fedora glusterfs.specKaleb S. KEITHLEY2013-04-264-6/+33
| | | | | | | | | BUG: 950083 Change-Id: I96aeb8fbe8b79bbc058ff9a45167d822abb576ed Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/4876 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* glusterd: Introduce volume op-versionsKaushal M2013-04-2611-419/+600
| | | | | | | | | | | | | | | | | | | | | | | Each volume is now associated with two op-versions, * op_version - the op-version of the highest op-versioned feature enabled * client_op_version - the op-version of the highest op-versioned feature enabled which affects the clients only. These two op-versions are generated dynamically and kept updated during runtime. Glusterd now uses the respective volumes' client-op-version during getspec requests. To achieve the above a new field in the vme table is introduced, client_option, this boolean field tells if the option is a client side option. Change-Id: I12c83b1dd29ab506026efd50d448cebbcee53c27 BUG: 907311 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/4584 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* performance/io-cache: Avoid double mem_put in ioc_readvPranith Kumar K2013-04-261-2/+3
| | | | | | | | | | | | | On readv error io-cache frame->local is not set to NULL so the local is mem_put in STACK_DESTROY as well. This patch sets frame->local to NULL in all cases. Change-Id: I00013df1377475aa5f3c0c681dcb58b32e1e8063 BUG: 955751 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4884 Reviewed-by: Raghavendra G <raghavendra@gluster.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* nfs: change default nfs port to 2049Rajesh Amaravathi2013-04-242-2/+2
| | | | | | | | | | | | | This change makes it possible to mount glusterfs volumes without specifying vers=3 option. Change-Id: If5a974e2bdfd2adbeac3d82af774310cdf30f988 BUG: 832939 Signed-off-by: Rajesh Amaravathi <rajesh@redhat.com> Reviewed-on: http://review.gluster.org/4840 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* gfapi: POSIX locking supportAnand Avati2013-04-245-0/+90
| | | | | | | | | Change-Id: I37d9e1fb4a715094876be6af3856c1b4cf398021 BUG: 953694 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/4881 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gfapi: implement readdirplus_r supportAnand Avati2013-04-242-8/+26
| | | | | | | | | | | This call is used by Samba VFS. Change-Id: Ib371502ad5a71b3b0e993f6b30e3dfb1f839c020 BUG: 953694 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/4879 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* syncop: set credentials of running process in @frameAnand Avati2013-04-241-1/+18
| | | | | | | | | | | | | | | Inherit the pid/euid/egid/groups of the running process in the frame. Do this only in cases where a loaded frame was not presented to the synctask. This behavior is required for Samba VFS. Change-Id: Ib181c90f47c6741197b9ce9f67a19e2914b647d2 BUG: 953694 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/4878 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gfapi: handle root (/) resolution gracefully for realpath()Anand Avati2013-04-231-1/+4
| | | | | | | | | | | Resolving path of / is crucial for realpath() to work properly. Change-Id: I8a1b482beba37f01afbd20446d9e6f6125f2ec34 BUG: 953694 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/4872 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr: Added documentation for eager-lock checkPranith Kumar K2013-04-221-0/+17
| | | | | | | | | Change-Id: Ifa42762adde8b55ef1e2b51a59c93cebd983343f BUG: 912581 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4792 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterd: volume-sync needs to work with rejected peersKrishnan Parthasarathi2013-04-221-3/+5
| | | | | | | | | Change-Id: I970a51d3f62bcf414eb9552a68d1068430b93216 BUG: 950048 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/4815 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gfapi: support for chdir() and familyAnand Avati2013-04-196-10/+302
| | | | | | | | | | | | Add support for chdir, fchdir, getcwd, realpath equivalents in GFAPI. These are required for the Samba VFS plugin. Change-Id: I91d2db9146994403c98961c489c7640c51d5add2 BUG: 953694 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/4853 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* tests: Fix volume-status test scriptKrishnan Parthasarathi2013-04-192-4/+11
| | | | | | | | | | | | | | * The functions now return the aggregated return value instead of just echoing it. * Fixed the shd test loop to use the proper variable * Added 'wait's for nfs and shd services to come online. BUG: 764966 Change-Id: Iedbb5be0d5e50108ed4847d58625ccb093c22251 Original-author: Kaushal M <kaushal@redhat.com> Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/4856 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterd: validate performance.nfs.* option values during volume set stageKrutika Dhananjay2013-04-182-2/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PROBLEM: performance.nfs.* option values (which are of type boolean) are not validated during the stage phase of 'volume set'. The result - nfs graph generation fails during commit phase, AFTER the option and its (invalid) value have been placed in volinfo->dict. CAUSE: nfsperfxl_option_handler() - the function that validates the values of performance.nfs.* options - never receives the (key,value) pair that needs to be set, for validation during 'volume set' stage. FIX: In build_nfs_graph(), copy the (mod_)dict containing the (option,value) parameters into set_dict before attempting to build the client graph for the volume on which the operation is being performed. Of course, an easier way out would be to simply do a 'volume reset' and pretend nothing wrong happened! Change-Id: I56b17d0239d58a9e0b7798933a3c8451e2675b69 BUG: 949930 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/4814 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Avoided deadlock in single node cluster, glusterd restartKrishnan Parthasarathi2013-04-162-0/+13
| | | | | | | | | | | | | | | | | | | In a single node cluster, it is possible to deadlock on the "big lock", while restarting bricks. In glusterd_restart_bricks, we perform a glusterd_brick_connect, where we release the big lock in anticipation that glusterd_brick_rpc_notify could run in the same C stack (and deadlocking). So, in the restart code path, we could unlock before we have performed a lock on the big lock. To fix this, we need to take the big lock in the glusterd_launch_synctask 'thread' as well. Change-Id: I1abea1ca82b55c784b8a810a8194f254b32b1dcc BUG: 948686 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/4837 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* rpm: remove useless provides for xlator .so files and private librariesNiels de Vos2013-04-151-0/+16
| | | | | | | | | | | | | | | | | | | | | | xlator .so files and private libraries should be skipped while scanning for provides: - https://fedoraproject.org/wiki/Packaging:AutoProvidesAndRequiresFiltering This prevents automatic generated provides like these in the glusterfs, glustrefs-fuse and glusterfs-server packages: - addr.so.0()(64bit) - afr.so.0()(64bit) - client.so.0()(64bit) - dht.so.0()(64bit) - ... BUG: 952122 Change-Id: Icd08925eb1826f3593129e7c19de83528f7b6301 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/4823 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* object-storage: provide more common cfg defaultsMohammed Junaid2013-04-122-3/+56
| | | | | | | | | | | | | | | | Provide more common configuration defaults, as seen and recommended across many large customer installations, as well as provide some guidance on how to set the parameters. See BZ 904629 (https://bugzilla.redhat.com/show_bug.cgi?id=904629). Change-Id: Id9f20aafd75f2a0b589c67654dce87534bf80c33 BUG: 904629 Signed-off-by: Mohammed Junaid <junaid@redhat.com> Reviewed-on: http://review.gluster.org/4789 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* object-storage: cleanup err handling in Glusterfs.Mohammed Junaid2013-04-121-5/+4
| | | | | | | | | | Change-Id: I4fa1a7b9214c6897459a99bedde80e84eb2b9cbc BUG: 904370 Signed-off-by: Mohammed Junaid <junaid@redhat.com> Reviewed-on: http://review.gluster.org/4788 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* object-storage: turn off stat() for container listMohammed Junaid2013-04-124-4/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Turn of stat() system calls used to fetch the file size during a container listing operation since these system calls can swamp Gluster and the result is most often not used. When a GET or HEAD request is made on a container, stat() system calls are made during the Python standard library method, os.walk, to determine if a given directory entry is another directory to recurse into, and then utils._update_list() will stat() each file to get it size, and finally utils.get_container_details_from_fs() will stat() each directory encountered. For most installations we have seen so far, we don't need the container listing to accurately return the size of all the objects in the container, so we can reduce the number of stat() system calls by not fetching the size of the object. For now, turn it off by default, and provide an /etc/swift/fs.conf configuration parameter to turn it back on: accurate_size_in_listing = yes The default for the above is "no". Change-Id: I7dde11e14bb32ecafa3eabb08852f1ffc4366b35 BUG: 903396 Signed-off-by: Mohammed Junaid <junaid@redhat.com> Reviewed-on: http://review.gluster.org/4787 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd: big lock - a coarse-grained locking to prevent racesKrishnan Parthasarathi2013-04-1217-106/+692
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are primarily three lists that are part of glusterd process, that are concurrently accessed. Namely, priv->volumes, priv->peers and volinfo->bricks_list. Big-lock approach ----------------- WHAT IS IT? Big lock is a coarse-grained lock which protects all three lists, mentioned above, from racy access. HOW DOES IT WORK? At any given point in time, glusterd's thread(s) are in execution _iff_ there is a preceding, inbound network event. Of course, the sigwaiter thread and timer thread are exceptions. A network event is an external trigger to glusterd, via the epoll thread, in the form of POLLIN and POLLERR. As long as we take the big-lock at all such entry points and yield it when we are done, we are guaranteed that all the network events, accessing the global lists, are serialised. This amounts to holding the big lock at - all the handlers of all the actors in glusterd. (POLLIN) - all the cbks in glusterd. (POLLIN) - rpc_notify (DISCONNECT event), if we access/modify one of the three lists. (POLLERR) In the case of synctask'ized volume operations, we must remember that, if we held the big lock for the entire duration of the handler, we may block other non-synctask rpc actors from executing. For eg, volume-start would block in PMAP SIGNIN, if done incorrectly. To prevent this, we need to yield the big lock, when we yield the synctask, and reacquire on waking up of the synctask. Change-Id: Ib929f9905b55fb6c3fc27fefb497a26dba058e4f BUG: 948686 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/4784 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* license: xlators/protocol/server dual license GPLv2 and LGPLv3+Kaleb S. KEITHLEY2013-04-1210-145/+57
| | | | | | | | | BUG: 951549 Change-Id: I3de5bd86d4238a60a0a85ba2e15d9c131969b210 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/4816 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* object-storage: rebase Swift to 1.8.0 (grizzly)Kaleb S. KEITHLEY2013-04-122-8/+6
| | | | | | | | | | | Two minor tweaks found while packaging 3.4.0-0.1.alpha2 for Fedora 19 BUG: 948039 Change-Id: I97175636164702cf4042bc4a18ffead76ad386cb Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/4807 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterd: Fixed spurious wakeups in glusterd syncopsKrishnan Parthasarathi2013-04-124-22/+64
| | | | | | | | | | | | | glusterd syncops perform a barrier_wake whenever rpc_clnt_submit returned -1. This is based on the wrong assumption that the cbkfn wasn't called. This would result in one more wakeup than there ought to be. Change-Id: I591e67c267f0e26d1145bf8fb5feeb2c13a751a1 BUG: 948686 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/4802 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: add BuildRequires librdmacm-develKaleb S. KEITHLEY2013-04-121-1/+1
| | | | | | | | | | | | | See http://review.gluster.org/149 Installed librdmacm-devel RPM on the build server. Change-Id: Iafb30e9cf1b15272b80329cc6141c7e92b43daee BUG: 950083 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/4804 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* build: really disable fusermount if you say soNiels de Vos2013-04-101-1/+1
| | | | | | | | | | | | | | There is no logic in configure.ac that provides a $disable_fusermount variable. So, use the $enable_fusermount variable instead. Follow-up-for: http://review.gluster.org/4773 Change-Id: I81cdbd0045409d0036438d542ca6dc1934f784e4 BUG: 948205 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/4803 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Sachidananda Urs <sacchi@gmail.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* tests: fix further issues with bug-874498.tAnand Avati2013-04-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The failure of bug-874498.t seems to be a "bug" in glustershd. The situation seems to be when both subvolumes of a replica are "local" to glustershd, and in such cases glustershd is sensitive to the order in which the subvols come up. The core of the issue itself is that, without the patch (#4784), self-heal daemon completes the processing of index and no entries are left inside the xattrop index after a few seconds of volume start force. However with the patch, the stale "backing file" (against which index performs link()) is left. The likely reason is that an "INDEX" based crawl is not happening against the subvol when this patch is applied. Before #4784 patch, the order in which subvols came up was : [2013-04-09 22:55:35.117679] I [client-handshake.c:1456:client_setvolume_cbk] 0-patchy-client-0: Connected to 10.3.129.13:49156, attached to remote volume '/d/backends/brick1'. ... [2013-04-09 22:55:35.118399] I [client-handshake.c:1456:client_setvolume_cbk] 0-patchy-client-1: Connected to 10.3.129.13:49157, attached to remote volume '/d/backends/brick2'. However, with the patch, the order is reversed: [2013-04-09 22:53:34.945370] I [client-handshake.c:1456:client_setvolume_cbk] 0-patchy-client-1: Connected to 10.3.129.13:49153, attached to remote volume '/d/backends/brick2'. ... [2013-04-09 22:53:34.950966] I [client-handshake.c:1456:client_setvolume_cbk] 0-patchy-client-0: Connected to 10.3.129.13:49152, attached to remote volume '/d/backends/brick1'. The index in brick2 has the list of files/gfid to heal. It appears to be the case that when brick1 is the first subvol to be detected as coming up, somehow an INDEX based crawl is clearing all the index entries in brick2, but if brick2 comes up as the first subvol, then the backing file is left stale. Also, doing a "gluster volume heal full" seems to leave out stale backing files too. As the crawl is performed on the namespace and the backing file is never encountered there to get cleared out. So the interim (possibly permanent) fix is to have the script issue a regular self-heal command (and not a "full" one). The failure of the script itself is non-critical. The data files are all healed, and it is just the backing file which is left behind. The stale backing file too gets cleared in the next index based healing, either triggered manually or after 10mins. Change-Id: I5deb79652ef449b7e88684311e804a8a2aa4725d BUG: 874498 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/4798 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* glusterd: changes in 'volume create' behaviourKrutika Dhananjay2013-04-0910-27/+441
| | | | | | | | | | | | | This patch incorporates all the changes suggested on the behaviour of 'volume create' command in http://review.gluster.org/#change,4214 (comment #14, to be precise). Change-Id: Iaac524a59738b177415595b18aa8a136090d3d25 BUG: 948729 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/4740 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* tests: fix dependency on sleep in bug-874498.tAnand Avati2013-04-091-8/+14
| | | | | | | | | | | | | | | With the introduction of http://review.gluster.org/4784, there are delays which breaks bug-874498.t which wrongly depends on healing to finish within 2 seconds. Fix this by using 'EXPECT_WITHIN 60' instead of sleep 2. Change-Id: I2716d156c977614c719665a5e1f159dabf2878b5 BUG: 874498 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/4796 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* mgmt/glusterd: enable valgrind usage even in non DEBUG buildRaghavendra Bhat2013-04-094-24/+13
| | | | | | | | | | | | * Till now running glusterfs processes were allowed to run in valgrind mode only when built with debug mode enabled. Change-Id: I11e07ea2a4da4f82f70cdded6258a22d65d6db64 BUG: 922877 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/4688 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* cluster/distribute: Ignore non-participating subvols for layout checksshishir gowda2013-04-094-27/+178
| | | | | | | | | | | | | | | | | | | | | | | When subvols-per-directory is < available subvols, then there are layouts which are not populated. This leads to incorrect identification of holes or overlaps. We need to ignore layouts, which have err == 0, and start == stop. In the current scenario (start == stop == 0). Additionally, in layout-merge, treat missing xattrs as err = 0. In case of missing layouts, anomalies will reset them. For any other valid subvoles, err != 0 in case of layouts being zeroed out. Also reverted back dht_selfheal_dir_xattr, which does layout calculation only on subvols which have errors. Change-Id: I9f57062722c9e8a26285e10675c31a78921115a1 BUG: 921408 Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/4668 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* syncenv: be robust against spurious wake()sAnand Avati2013-04-091-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the current implementation, when the callers of synctasks perform a spurious wake() of a sleeping synctask (i.e, an extra wake() soon after a wake() which already woke up a yielded synctask), there is now a possibility of two sync threacs picking up the same synctask. This can result in a crash. The fix is to change ->slept = 0|1 and membership of synctask in runqueue atomically. Today we dequeue a task from the runqueue in syncenv_task(), but reset ->slept = 0 much later in synctask_switchto() in an unlocked manner -- which is safe, when there are no spurious wake()s. However, this opens a race window where, if a second wake() happens after the dequeue, but before setting ->slept = 0, it results in queueing the same synctask in the runqueue once again, and get picked up by a different synctask. This is has been diagnosed to be the crashes in the regression tests of http://review.gluster.org/4784. However that patch still has a spurious wake() [the trigger for this bug] which is yet to be fixed. Change-Id: I9b4b9dd5115d6e62ba45162ae90dd5e917a4f83d BUG: 948686 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/4795 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* tests: fix spurious regression test failuresJeff Darcy2013-04-081-0/+21
| | | | | | | | | Change-Id: I752aeb8e25f43281d2f5cf33d0ff5aeae49687e7 BUG: 764966 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/4794 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* cli: Address a double free with volume info.Vijay Bellur2013-04-082-2/+14
| | | | | | | | | | | | | Crash is observed when volume info is performed on a non-exisiting volume name and the output format is xml. Change-Id: I88aa5d9dc954b1352f5cc3b5b38742c832bc1bb8 BUG: 949298 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/4785 Reviewed-by: Kaushal M <kaushal@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterfsd: Cleanup temporary files from /tmpVijay Bellur2013-04-083-1/+43
| | | | | | | | | | | | | | | | For each gluster{d,fs,fsd} start, one or more temporary file(s) created in /tmp were not being unlinked. This patch cleans that up. Modified a typo in an unrelated log message as well. Change-Id: I3dec2a2ca40c7d6828eb238ec9cd08b6072cf0dd BUG: 949327 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/4786 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* afr: let eager-locking do its own overlap checksAnand Avati2013-04-054-56/+87
| | | | | | | | | | | | | | | | | | | | | | | | Today there is a non-obvious dependence of eager-locking on write-behind. The reason is that eager-locking works as long as the inheriting transaction has no overlaps with any of the transactions already in progress. While write-behind provides non-overlapping writes as a side-effect most of times (and only guarantees it when strict-write-ordering option is enabled, which is not on by default) eager-lock needs the behavior as a guarantee. This is leading to complex and unwanted checks for the presence of write-behind in the graph, for the simple task of checking for overlaps. This patch removes the interdependence between eager-locking and write-behind by making eager-locking do its own overlap checks with in-progress writes. Change-Id: Iccba1185aeb5f1e7f060089c895a62840787133f BUG: 912581 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/4782 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* object-storage: rebase Swift to 1.8.0 (grizzly)Kaleb S. KEITHLEY2013-04-052-36/+138
| | | | | | | | | Change-Id: I24265c12a45eac4cec761748096118c9647440be BUG: 948039 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/4779 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* storage/posix: introduce node-uuid-pathinfoVenky Shankar2013-04-054-2/+78
| | | | | | | | | | | | | | | enabling this option has an effect on pathinfo xattr request returning <node-uuid>:<path> instead of the default - which is <hostname>:<path>. Change-Id: Ice1b38abf8e5df1568bab6d79ec0d53dfa520332 BUG: 765380 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/4567 Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* object-storage: use tox for unit tests; fix em tooPeter Portante2013-04-0519-76/+91
| | | | | | | | | | | | | | | | | | | | | | | | Add the ability to use tox for unit tests, since it helps us solve the problem of supporting multiple branches that require different versions of dependencies, and allows us to possibly support multiple versions of python in the future. Also fix the code to work with pre-grizzly environments, by not requiring the constraints backport. Also fixed the xattr support to work with both pyxattr and xattr modules. And fixed the ring tests to also work without a live /etc/swift directory. BUG: 948657 (https://bugzilla.redhat.com/show_bug.cgi?id=948657) Change-Id: I2be79c8ef8916bb6552ef957094f9186a963a068 Signed-off-by: Peter Portante <peter.portante@redhat.com> Reviewed-on: http://review.gluster.org/4781 Reviewed-by: Alex Wheeler <wheelear@gmail.com> Tested-by: Alex Wheeler <wheelear@gmail.com> Reviewed-by: Anand Avati <avati@redhat.com>
* object-storage: Import missing sys and errno modules.Mohammed Junaid2013-04-042-2/+98
| | | | | | | | | | | | | Import the missing modules and implemented unit test case for Glusterfs module. Thanks to Paul Smith for pointing it out. Change-Id: Ib04202aa0ae05c4da2ebbf11f87d6accc778f827 BUG: 905946 Signed-off-by: Mohammed Junaid <junaid@redhat.com> Reviewed-on: http://review.gluster.org/4758 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* gsync: Display additional information in status commandsarvotham s pai2013-04-042-4/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | Added code to display extra information when status command is executed. Information shown now are 1 Number of files synced 2 crawl time 3 total sync time 4 bytes synced bytes synced is taken from rsync output . --stats option of rsync gives extra infor mation about the sync.In stats output there is a field called Total transferred file size which states the ammount of bytes synced . This information is parsed from stdout output using regular expressions.Bytes synced information can be used to calculate throughput. Change-Id: Id9bba9fff45ee7049bb8257c6fd918e5237e05b1 BUG: 947774 Signed-off-by: sarvotham s pai <spai@redhat.com> Reviewed-on: http://review.gluster.org/4749 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* tests: Remove grep process entries from pidgrepRaghavendra Talur2013-04-041-1/+1
| | | | | | | | | | | | | | | | | | Problem: We were picking process with lowest pid from ps|grep result. However, lowest pid need not be oldest process as recycling of PIDs can take place. Solution: Removed grep process entries from ps entries using grep -v grep. Change-Id: I2b9687a05a34cf6358f773183770d69a3fb9eb10 BUG: 858488 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/4765 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr: Treat all dir fop failure as success in changelogPranith Kumar K2013-04-033-2/+35
| | | | | | | | | | | | | | | For example: If a new entry creation fop fails with EEXIST or a delete entry fop fails with ENOENT, on all the subvols the fop is wound, then no change took place to the directory. So we can treat that case as no change happened to the directory. Change-Id: I3b3a7931954da2166a9cba19ff9f76f37739d751 BUG: 860210 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4626 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* posix: fix dangerous "sharing" of fd in readdir between two requestsAnand Avati2013-04-031-2/+17
| | | | | | | | | | | | | | | | | | | | | | | posix_fill_readdir() is a multi-step function which performs many readdir() calls, and expects the directory cursor to have not "seeked away" elsewhere between two successive iterations. Usually this is not a problem as each opendir() from an application has its own backend fd, and there is nobody else to "seek away" the directory cursor. However in case of NFS's use of anonymous fd, the same fd_t is shared between all NFS readdir requests, and two readdir loops can be executing in parallel on the same dir dragging away the cursor in a chaotic manner. The fix in this patch is to lock on the fd around the loop. Another approach could be to reimplement posix_fill_readdir() with a single getdents() call, but that's for another day. Change-Id: Ia42e9c7fbcde43af4c0d08c20cc0f7419b98bd3f BUG: 948086 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/4774 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cluster/afr: Made afr_sh_purge_entry_common message log more clear.Venkatesh Somyajulu2013-04-031-3/+1
| | | | | | | | | | | | | | | FIX: In missing entry self heal, once the source directories are determined after the lookup and if file is not present on any of the brick which contains the souce directory, the entry is removed from the directory. So log message should give information of "Purging of entry". Change-Id: I4d3deb602e0812dc1c9c8ba0a466716d81dede7e BUG: 947312 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/4753 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* dict: Put "goto out" in dict_unserialize to avoid process crashVenkatesh Somyajulu2013-04-031-0/+1
| | | | | | | | | | | | | | | | Problem: In the dictionary serialization function, if the [(buf + vallen) > (orig_buf + size)], then memdup is getting failed. Fix: Put "goto out" whenever this condition is met. Change-Id: I662628a936596dbb47825aad47d7dbab2879eb07 BUG: 947824 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/4767 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* pump: Set self-heal readdir size in pumpPranith Kumar K2013-04-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: In Pump entry self-heal happens for each directory during the first opendir using conservative merge. But in entry-self-heal readdir is issued with '0' size. So entry self-heal is not creating any files. After pump thinks entry self-heal is complete it proceeds to heal each of the file in the directory it just healed. Fortunately most of the times it chooses source-brick in pump as read-child for readdir. This happens because readchild is the subvolume on which lookup succeeds first. In pump lookup succeeds faster in local process than on the destination brick process most of the times. For all the entries pump finds in readdir it does a lookup. During this lookup the entry on the destination brick is created and healed. This is the reason why replace-brick succeeds whenever read-child for the directory is chosen as the source-brick. Which is most of the times. When read-child is chosen as the destination brick, readdir returns no entries so replace-brick completes without syncing the whole data. Fix: Set readdir-size in pump so that entry self-heal happens with 64k size. This ensures that entry self-heal triggered from opendir actually creates the files on the destination brick. Change-Id: I65ea45d3c2735a9578f3aa34eff771b6563241ca BUG: 909800 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4712 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: enable fusermount by defaultAnand Avati2013-04-032-11/+12
| | | | | | | | | | | | | | | | | | The fusermount available in gluster is customized to ensure mounting with SELinux happens properly, i.e - to have a separate thread for fuse_thread_proc which can process getxattr requests and in parallel perform sys_mount() in a different thread, thereby avoiding a deadlock. However our build and packaging defaults to not including our fusermount. This patch reverses the defaults. Change-Id: I793af4c2f56aeac46efae3db30e7c64ee7c18850 BUG: 811217 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/4773 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* protocol/client: Print valid loc identifiersPranith Kumar K2013-04-033-36/+43
| | | | | | | | | | Change-Id: I45f91105862a2484b8906a7a63b98ab4aaf80d05 BUG: 924643 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4683 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
generated by cgit (git 2.34.1) at 2024-04-20 02:33:10 +0000