summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* glusterfs.spec: Add 'python and python-ctypes' dependencyv3.5qa2Harshavardhana2013-11-261-0/+1
| | | | | | | | | Change-Id: Icde586131bab00476abc44d8dd4e2db7e9d59b2b BUG: 1033275 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6339 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* features/quota: Add the quota config xattr to newly added brickVarun Shastry2013-11-268-0/+277
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: Quota directory limit configuration is stored in the xattrs. When a new brick is added these 'limit-set' xattrs have to be created to the directory in the new brick. This is done by the dht directory healing when the directory is created in the new brick. Since 'root' directory is already created DHT doesn't heal the limit-set xattr root. Solution: When the add-brick command is issued run the below hook script to heal the 'limit-set' xattr. The hook script does the following only if limit is configured on root. 1. Create an auxiliary mount. 2. getxattr 'limit-set' on the root 3. setxattr the same value on the root But this script needs the volume to be started to make the auxiliary mount. To handle the case when the add-brick is issued when the volume was stopped, symlink is created by the 'master' script to the corresponding location and these two are by default disabled. So, a 'master' script is added in the add-brick/pre. When add-brick command is issued, it enables one of the scripts mentioned above based on the condition, if volume is started - enable add-brick/post script else - enable start/post script After the actual script completes its job, it disables itself. Note: The enabling and disabling of the script is based on the glusterd's logic, that it only runs the scripts which starts its name with 'S'. So, Enable - symlink the file to 'S'* Disable - unlink the symlink. Change-Id: I2d3947a4d686c54417ec95f530af3bdd3444f4e2 BUG: 969461 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/6104 Reviewed-by: Brian Foster <bfoster@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: use proper copy to set node-nameBala.FA2013-11-261-2/+19
| | | | | | | | | | | | Previously node-name is set to point to node-uuid which could cause memory leak. This is fixed by having memory copy of node-uuid. BUG: 1012296 Change-Id: I3b638ec289d5b167c6e752ef1ba41f41efacb9da Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/6330 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Fix CFLAGS handling with enable_debug.Jeff Darcy2013-11-261-10/+12
| | | | | | | | | | | | | The value was getting stomped by the Python stuff (for glupy) after we had supposedly dealt with enable_debug, so we were getting stray -O2 options that hamper debugging. Change-Id: Iacd616071c83b92018b597b6144ab565bd5fc66f Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/6362 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* posix: do not allow to set/get "trusted.glusterfs.volume-id" xattrVijaykumar M2013-11-263-2/+77
| | | | | | | | | Change-Id: I2e9a2264b1fd5ebc1ed0aff30225e89acbd0bcb4 BUG: 1034716 Signed-off-by: Vijaykumar M <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/6361 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/dht: Handle Link-info getxattr failure in rebalancePranith Kumar K2013-11-261-7/+15
| | | | | | | | | | | | | | When getxattr fails with errno other than ENODATA fail rebalance on that file. Log the reason for error. Change-Id: Ia519870b88e6e6dd464d1c0415411aa999f80bc9 BUG: 1032927 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/6341 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Shishir Gowda <sgowda@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* write-behind: handle iobref_merge() error gracefullyAnand Avati2013-11-261-2/+3
| | | | | | | | | | | .. by UNWINDing ENOMEM error, rather than crashing. Change-Id: Ica2d6399eaf7e381e7ebc41155620559c139c4d3 BUG: 1034398 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6349 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@gmail.com>
* io-cache: handle iobref_merge() error gracefullyAnand Avati2013-11-261-1/+4
| | | | | | | | | | | | .. by UNWINDing ENOMEM, rather than leaving pointer in vector pointing to stale memory. Change-Id: I7f3917ac056fae144f845c9d123233e91e278187 BUG: 1034398 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6351 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@gmail.com>
* read-ahead: handle iobref_merge() error gracefullyAnand Avati2013-11-261-1/+6
| | | | | | | | | | | | .. by UNWINDing ENOMEM rather than leaving pointers in vector which points to unref'ed (or even worse, re-used) iobufs. Change-Id: I849d8cbe5fc02ee992d4e28b7212c49aad4925c7 BUG: 1034398 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6350 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@gmail.com>
* iobufs: make iobref container size dynamicAnand Avati2013-11-263-8/+49
| | | | | | | | | | | | | | | With gfapi we can receive read/write size beyond the natural limits of FUSE and NFS server. iobref was hardcoded to hold iobuf refs up to 16 in count, which imposes a natural limit of 2MB with 128KB page sizes of read-ahead and io-cache. Fix this by making iobref's iobuf ref container size dynamic. Change-Id: I93d88104d6c5e7af96cc9f1bfcc870d80fa81dad BUG: 1034398 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6348 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@gmail.com>
* socket: limit vector count to IOV_MAXAnand Avati2013-11-262-2/+5
| | | | | | | | | | | | | IOV_MAX is the maximum supported vector count on a given platform. Limit the count to IOV_MAX if higher. As we are performing non-blocking IO getting a smaller return value is handled naturally. Change-Id: I94ef67a03ed0e10da67a776af2b55506bf721611 BUG: 1034398 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6354 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@gmail.com>
* cluster/dht: set layout in inode ctx even if linkfile failsAnand Avati2013-11-261-1/+1
| | | | | | | | | | | | | | Creating linkfile could have failed, but we dont care about linkfile for setting layout in the inode ctx (could be EEXIST etc.) So ignore @inode in cbk and pick it up from local->loc.inode Change-Id: I2952799d7ae0d3441b84b2ca2981afd75d7576e2 BUG: 1032859 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6319 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* core: fix errno for non-existent GFIDAnand Avati2013-11-269-15/+25
| | | | | | | | | | | | | | | | | | | When clients refer to a GFID which does not exist, the errno to be returned in ESTALE (and not ENOENT). Even though ENOENT might look "proper" most of the time, as the application eventually expects ENOENT even if a parent directory does not exist, not returning ESTALE results in resolvers (FUSE and GFAPI) to not retry resolution in uncached mode. This can result in spurious ENOENTs during concurrent path modification operations. Change-Id: I7a06ea6d6a191739f2e9c6e333a1969615e05936 BUG: 1032894 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6318 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/quota: Add TODO file.Raghavendra G2013-11-261-0/+14
| | | | | | | | | Change-Id: I31990f05ca1814d229026965b7675e3990a65678 BUG: 969461 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6360 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/dht: instruct marker whenever it shouldn't do accountingRaghavendra G2013-11-263-52/+100
| | | | | | | | | | | | | | | | | | This is needed for two reasons: * since dht-linkfiles are internal, they shouldn't be accounted. * hardlink handling in marker is broken. link/unlink of hardlinks present in same directory can break marker accounting. Hence, if src and dst are in same directory in case of rename, dht - if it breaks rename into link/unlink operations - should instruct marker to not to do accounting. Change-Id: I9c9f7384569f75a2792f6450ee7a5279bf751ae7 BUG: 1022995 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6203 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* features/marker-quota: exclude dht-linkfiles from being accounted.Raghavendra G2013-11-261-2/+2
| | | | | | | | | Change-Id: I3239f5e8477664dcc04434e4d455ae447493a7ac BUG: 1022995 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6153 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* core: add dht_is_linkfile helper procedure.Raghavendra G2013-11-265-7/+51
| | | | | | | | | | | | | | components other than distribute (like marker to exclude linkfiles from being accounted) also need awareness of what constitutes a linkfile. Hence its good to separate out this functionality into core. Change-Id: Ib944eeacc991bb1de464c9e73ee409fc7a689ff1 BUG: 1022995 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6152 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* features/quota: make writes short when the entire write cannot fit into ↵Raghavendra G2013-11-262-10/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | available space. This patch aims to prevent creation of infinite zero byte sized files due to amount of storage available before exceeding quota limit being less than write sizes. Imagine x bytes of storage is available before we exceed quota limit and quota enforcer is receiving writes of size y and (y > x). In this scenario, if we run a shell script like: # for i in $(seq 1 10); do dd if=/dev/zero of=$i bs=y count=1; done Then, we would end up with 10 zero byte sized files, because we allow only complete writes and all writes will fail because of lack of space. However, creates succeed since a create itself will consume zero bytes. In this pattern of creates and writes, size of volume would never grow and x bytes of space will always be available and we can end up with an infinite number of zero byte sized files. Change-Id: Ice148d6a2207883e41759f7b0be73abaa3198b41 BUG: 1012216 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6035 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli/glusterd: Changes to quota command Quota featureRaghavendra G2013-11-2633-781/+3685
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | re-work. Following are the cli commands that are new/re-worked: ====================================================== volume quota <VOLNAME> {enable|disable|list [<path> ...]|remove <path>| default-soft-limit <percent>} | volume quota <VOLNAME> {limit-usage <path> <size> [<percent>]} | volume quota <VOLNAME> {alert-time|soft-timeout|hard-timeout} {<time>} volume status [all | <VOLNAME> [nfs|shd|<BRICK>|quotad]] [detail|clients|mem|inode|fd|callpool] volume statedump <VOLNAME> [nfs|quotad] [all|mem|iobuf|callpool|priv|fd|inode|history] glusterd changes: ================= * Quota limits are now set as extended attributes by glusterd from the aux mount created by the cli. * The gfids of the directories on which quota limits are set for a given volume are stored in /var/lib/glusterd/vols/<volname>/quota.conf file in binary format, and whose cksum and version is stored in /var/lib/glusterd/vols/<volname>/quota.cksum. Original-author: Krutika Dhananjay <kdhananj@redhat.com> Original-author: Krishnan Parthasarathi <kparthas@redhat.com> BUG: 969461 Change-Id: If32bba36c67f9c2a30417af9c6389045b2b7c13b Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6003 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* features/quota: Improvements to quotaRaghavendra G2013-11-2625-1001/+3264
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Two stages of quota enforcement is done: Soft and hard quota Upon reaching soft quota limit on the directory it logs/alerts in the quota daemon log (ie DEFAULT_LOG_DIR/quotad.log) and no more writes allowed after hard quota limit. After reaching the soft-limit the daemon alerts the user/admin repeatively for every 'alert-time', which is configurable. * Quota enforcer is moved to server-side. It takes care of enforcing quota. Since enforcer doesn't have the cluster view, it relies on another service called quota-aggregator. Aggregator, on query can return the size of a directory based on the cluster view. Enforcer is always loaded in the server graph and is by passed if the feature is not enabled. Options specific to enforcer: server-quota - Specifies whether the feature is on/off. It is used to by pass the quota if turned off. deem-statfs - If set to on, it takes quota limits into consideration while estimating fs size. (df command). The algorithm followed is, i. Adjust statvfs based on limit configured on root. ii. If limit is set on the inode passed, use size/limits on that inode to populate statvfs. Otherwise, use size/limits configured on root. iii. Upon statvfs, update the ctx->size on the inode. iv. Don't let DHT aggregate, instead take the maximum of the usages from the subvols of the DHT, since each of it contains the complete information. Enforcer also makes use of gfid-to-path conversion functionality to work correctly when a client like nfs predominently relies on nameless lookups. * Quota Aggregator acts as a thin client to provide cluster view Its a lightweight *gluster client* process with no mount point, started upon enabling quota or restarting the volume. This is a single process run on each brick, which can answer queries on all volumes in the cluster. Its volfile stored in GLUSTERD_DEFAULT_WORKING_DIR/quotad/quotad.vol. Credits: Raghavendra Bhat <rabhat@redhat.com> Varun Shastry <vshastry@redhat.com> Shishir Gowda <sgowda@redhat.com> Kruthika Dhananjay <kdhananj@redhat.com> Brian Foster <bfoster@redhat.com> Krishnan Parthasarathi <kparthas@redhat.com> Change-Id: Id1cb25b414951da34c665a55f77385d482e0f9de BUG: 969461 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/5952 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* features/marker: quota friendly changesRaghavendra G2013-11-267-90/+479
| | | | | | | | | | | | | | | | | | | | | | | | | * handles renames on dht linkfiles correctly * nameless lookup friendly changes. uses gfid-to-path conversion functionality from storage/posix to build ancestry till root. * log message cleanup. * build inode contexts in readdirp * Accounting still not correct with hardlinks. Credits: ======== Vijay Bellur <vbellur@redhat.com> Raghavendra Bhat <rabhat@redhat.com> Change-Id: I415b6fbbc9691f5a38d9fd3c5d083a61e578bb81 BUG: 969461 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/5953 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* posix: placeholders for GFID to path conversionRaghavendra G2013-11-269-171/+1156
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | what? ===== The following is an attempt to generate the paths of a file when only its gfid is known. To find the path of a directory, the symlink handle to the directory maintained in the ".glusterfs" backend directory is read. The symlink handle is generated using the gfid of the directory. It (handle) contains the directory's name and parent gfid, which are used to recursively construct the absolute path as seen by the user from the mount point. A similar approach cannot be used for a regular file or a symbolic link since its hardlink handle, generated using its gfid, doesn't contain its parent gfid and basename. So xattrs are set to store the parent gfids and the number of hardlinks to a file or a symlink having the same parent gfid. When an user/application requests for the paths of a regular file or a symlink with multiple hardlinks, using the parent gfids stored in the xattrs, the paths of the parent directories are generated as mentioned earlier. The base names of the hardlinks (with the same parent gfid) are determined by matching the actual backend inode numbers of each entry in the parent directory with that of the hardlink handle. Xattr is set on a regular file, link, and symbolic link as follows, Xattr name : trusted.pgfid.<pargfidstr> Xattr value : <number of hardlinks to a regular file/symlink with the same parentgfid> If a regular file, hard link, symbolic link is created then an xattr in the above format is set in the backend. how to use? =========== This functionality can be used through getxattr interface. Two keys - glusterfs.ancestry.dentry and glusterfs.ancestry.path - enable usage of this functionality. A successful getxattr will have the result stored under same keys. Values will be, glusterfs.ancestry.dentry: -------------------------- A linked list of gf-dirent structures for all possible paths from root to this gfid. If there are multiple paths, the linked-list will be a series of paths one after another. Each path will be a series of dentries representing all components of the path. This key is primarily for internal usage within glusterfs. glusterfs.ancestry.path: ------------------------ A string containing all possible paths from root to this gfid. Multiple hardlinks of a file or a symlink are displayed as a colon seperated list (this could interfere with path components containing ':'). e.g. If there is a file "file1" in root directory with two hardlinks, "/dir2/link2tofile1" and "/dir1/link1tofile1", then [root@alpha gfsmntpt]# getfattr -n glusterfs.ancestry.path -e text file1 glusterfs.ancestry.path="/file1:/dir2/link2tofile1:/dir1/link1tofile1" Thanks Amar, Avati and Venky for the inputs. Original Author: Ramana Raja <rraja@redhat.com> BUG: 990028 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Change-Id: I0eaa9101e333e0c1f66ccefd9e95944dd4a27497 Reviewed-on: http://review.gluster.org/5951 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr: Provide HA for pathinfo getxattrPranith Kumar K2013-11-262-14/+81
| | | | | | | | | | | | | | | | | | | | | | | Problem: afr_[f]getxattr_pathinfo_cbks fail the fop even when it succeeded on one of the bricks. This can happen if the last response to pathinfo [f]getxattr is a failure. Fix: Remember if any of the [f]getxattr_pathinfos are successful and send that as the op_ret/op_errno value to the xlators above. Note: Winding fop to a client xlator that is not connected to server produces an error log. Preventing that by not even winding fop when client xlator is DOWN. Change-Id: I846e8c47423ffcfa2eabffe8924534781a36841a BUG: 1032927 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/6332 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* gNFS: More clean up for Gluster NFSSantosh Kumar Pradhan2013-11-256-76/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 1) Fix the typo in NFS default ACL The typo was introduced as part of the Fix to BZ 1009210 i.e. http://review.gluster.org/5980. The user ACL xattr structure was passed to default ACL xattr. 2) Clean up NFS code to avoid unnecessary SEGV in rpcsvc_drc_reconfigure() which was not validating the svc->drc. Add a routine rpcsvc_drc_deinit() to handle the clean up of DRC specific data structures. For init(), use rpcsvc_drc_init(). 3) nfs_init_state() was returning wrong value even if the registration with portmapper failed, causing the NFS server process to hang around. As a result it used to get SEGV during rpcsvc_drc_reconfigure(). 4) Clean up memfactor usage across nfs.c nfs3.c. Change-Id: I5cea26cb68dd8a822ec0ae104952f67fe63fa703 BUG: 1009210 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6329 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* tests: add EXPECT_NOT macroRaghavendra G2013-11-241-1/+32
| | | | | | | | | | | | | | | | | We needed this macro while writing test cases for quota. With quota, a directory size is only guaranteed to be within some margin of quota limit, but not an accurate number. With not knowing what size to expect and EXPECT macro not complete enough to accept ranges of sizes, we can atleast write test-cases with EXPECT_NOT macro. After copying data to an empty file, it will be guaranteed the size will not be zero. This is good enough for quota test cases. Change-Id: I722ebd68044716a5eeaf0bd7e9aae61df8469017 BUG: 1022995 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6253 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* group-virt: To minimize 'split-brain' enable quorum under virt profileHarshavardhana2013-11-221-0/+2
| | | | | | | | | | | | | | | | | | Quorum as default is necessary when storing virtual machine images. It would be necessary to enable both server and client quorum Currently defaulted values are: ---------------- server-quorum-type=server quorum-type=auto ---------------- Change-Id: Ic2adb5856ce3c2589476e872e988cae6eeb9b25e BUG: 1032080 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6340 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* fuse: revalidate group id cache on uid/gid change detectionAnand Avati2013-11-214-4/+25
| | | | | | | | | | | | | | | | | | | - Remember the uid and gid of the pid at the time of caching the group id list. - Next time when referring to the cache confirm that uid and gid of that pid has not changed since. If it has, treat it like a timeout/cache miss. - Solves group id caching issue caused when Samba runs on gluster FUSE mount and changes the uid/gid on a per syscall basis. Change-Id: I3382b037ff0b6d5eaaa36d9c898232543475aeda BUG: 1032438 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6320 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* syncops: expose @flags in syncop_rmdir()Anand Avati2013-11-214-5/+5
| | | | | | | | | Change-Id: I9b73c1db728e4cb3948fc118cceb292b21d48b96 BUG: 1021686 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6112 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cli: fix possible memory leaksBala.FA2013-11-212-1/+6
| | | | | | | | | BUG: 955548 Change-Id: Iae410712e7e6d7a76cd537c77f1919e3b4cdf6bb Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/6328 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Add description for git based installations.Vijay Bellur2013-11-211-2/+4
| | | | | | | | Change-Id: I60e445539f255b3220f885bd790f800e4c1ea55a Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/6333 Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Tested-by: Lalatendu Mohanty <lmohanty@redhat.com>
* libglusterfs: use correct check for linux falloc.h availabilityBrian Foster2013-11-201-2/+11
| | | | | | | | | | | | We should check for HAVE_LINUX_FALLOC_H rather than HAVE_FALLOC_H to determine whether to include linux/falloc.h. Change-Id: I05eca4de2893a88d6b9cc5ebfce738708b9960d4 BUG: 1032378 Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-on: http://review.gluster.org/6314 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* Build storage/posix xlator if fallocate() does not existsEmmanuel Dreyfus2013-11-201-1/+12
| | | | | | | | | | | If fallocate() does not exists, just return EOPNOTSUPP BUG: 764655 Change-Id: I808114f733c88985519dc47fb7537e1ced1db077 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/6289 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* bd: Add Zerofill FOP supportM. Mohan Kumar2013-11-205-3/+295
| | | | | | | | | | BUG: 1028673 Change-Id: I9ba8e3e6cf2f888640b4d2a2eb934a27ff903c42 Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/6290 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* mount/fuse: handle --gid-timeout=0 properlyAnand Avati2013-11-202-2/+5
| | | | | | | | | | | | | | Fix the bug which was using the timeout value as a flag to indicate if it was set (and hence would fail when timeout=0 would evaluate as False) Change-Id: Ie9a8f28d35603458cdac26c9a4e0343e7eda7344 BUG: 1032438 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6308 Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* gNFS: Coverity fix for CID 1128906Santosh Kumar Pradhan2013-11-201-11/+13
| | | | | | | | | | | | | Fix the Coverity issue introduced in RFE: NFS volume set/reset commit i.e. http://review.gluster.org/6236 Change-Id: I817b9da03a3ce7f5511303faea0c50dfdad60ff4 BUG: 1027409 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6307 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd: Start rebalance only where requiredKaushal M2013-11-203-1/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | Gluster was starting rebalance processes on peers where it wasn't required in two cases. - For a normal rebalance command on a volume, rebalance processes were started on all peers instead of just the peers which contain bricks of the volume - For rebalance process being restarted by a volume sync, caused by a new peer being probed or a peer restarting, rebalance processes were started on all peers, for both a normal rebalance and for remove-brick needing rebalance. This patch adds a new check before starting rebalance process in the above two cases. - For rebalance process required by a rebalance command, each peer will check if it contains atleast one brick of the volume - For rebalance process required by a remove-brick command, each peer will check if it contains atleast one of the bricks being removed Change-Id: I512da16994f0d5482889c3a009c46dc20a8a15bb BUG: 1031887 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/6301 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: List only nodes which have rebalance started in rebalance statusKaushal M2013-11-202-214/+137
| | | | | | | | | | | | | | | | Listing the nodes on which rebalance hasn't been started is just giving out extraneous information. Also, refactor the rebalance status printing code into a single function and use it for both rebalance and remove-brick status. BUG: 1031887 Change-Id: I47bd561347dfd6ef76c52a1587916d6a71eac369 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/6300 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* mgmt/glusterd: fix undefined sybmol error related to BDPranith Kumar K2013-11-193-1/+5
| | | | | | | | | | Change-Id: I2210f1ac7de04c6025c0ec02d998b626d41466ae BUG: 1028672 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/6303 Reviewed-by: M. Mohan Kumar <mohan@in.ibm.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Do not build fallocate FUSE FOP if the system call does not existEmmanuel Dreyfus2013-11-191-0/+4
| | | | | | | | | BUG: 764655 Change-Id: Ica310e75bee16741b837e658981238c1b99c254f Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/6288 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Python build flag detectionEmmanuel Dreyfus2013-11-191-0/+15
| | | | | | | | | | | Ask python-config for proper python build flags BUG: 764655 Change-Id: I7aede0f93637c61dbafc43580bff46af60f0f0d3 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/6283 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* NetBSD missing backtrace(3) portability fixEmmanuel Dreyfus2013-11-193-1/+60
| | | | | | | | | | | | Implement backtrace(3) and backtrace_symbols(3) which do not exist in NetBSD While there, remove duplicate #include <stdio.h> BUG: 764655 Change-Id: Iccd695765906e085c3f8fcb670506d4fea68fa39 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/6285 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Search gettext() in -lintlEmmanuel Dreyfus2013-11-191-0/+1
| | | | | | | | | | | | If gettext() is not found in libc, look it up in libintl (this is where NetBSD has it) BUG: 764655 Change-Id: Ifba8681b8603ead5d0b8587b71457250982077e1 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/6287 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* autogen.sh portability fixesEmmanuel Dreyfus2013-11-191-2/+11
| | | | | | | | | | | | - Do not assume tar has --version, as BSD tar does not - Allow specifying python binary through PYTHONBIN in case it is e.g. python2.7 BUG: 764655 Change-Id: I71f0f4830e10915782775de811c92db8e6ab4c55 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/6281 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Fix xml compilation errorM. Mohan Kumar2013-11-191-1/+6
| | | | | | | | | | | | | | | Compiling GlusterFS without xml package results in following build error cli-rpc-ops.o: In function `gf_cli_status_cbk': /home/mohan/Work/glusterfs/cli/src/cli-rpc-ops.c:6430: undefined reference to `cli_xml_output_vol_status_tasks_detail' Change-Id: I49b3c46ac3340c40e372bef4690cedb41df20e8a Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/6295 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* BD fixes for coverity scanM. Mohan Kumar2013-11-191-5/+9
| | | | | | | | | BUG: 1028672 Change-Id: I2e7889fb113cedd2d5928b210149d3fd7b8b22ab Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/6292 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Fixes for ZF reported by coverityM. Mohan Kumar2013-11-193-3/+11
| | | | | | | | | BUG: 1028673 Change-Id: I7c75738cca22c81c5629d579ef5bea24000e622e Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/6291 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Have #include <signal.h> for kill(2)Emmanuel Dreyfus2013-11-182-0/+2
| | | | | | | | | BUG: 764655 Change-Id: I4d18c9a6c00cb4696645fcb437398562f00b9d24 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/6284 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* NetBSD missing loff_t portability fixEmmanuel Dreyfus2013-11-171-0/+4
| | | | | | | | | | | define loff_t as off_t, is is already long long anyway. BUG: 764655 Change-Id: I99edda9b804475a8696c2d32ccf8eae152851e21 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/6286 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli: add peerid to volume status xml outputBala.FA2013-11-143-0/+46
| | | | | | | | | | | | This patch adds <peerid> tag to bricks and nfs/shd like services to volume status xml output. BUG: 955548 Change-Id: I9aaa9266e4d56f632235eaeef565e92d757c0694 Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/6162 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* zerofill: Change the type of len argument of glfs_zerofill() to off_tBharata B Rao2013-11-1424-36/+36
| | | | | | | | | | | | | | glfs_zerofill() can be potentially called to zero-out entire file and hence allow for bigger value of length parameter. Change-Id: I75f1d11af298915049a3f3a7cb3890a2d72fca63 BUG: 1028673 Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-on: http://review.gluster.org/6266 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: M. Mohan Kumar <mohan@in.ibm.com> Tested-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-by: Anand Avati <avati@redhat.com>
generated by cgit (git 2.34.1) at 2024-04-16 21:30:58 +0000